How do I reproduce the vector of this circle?

I would like to reproduce the following vector, that you can also download here.
Though, I don't know how to do it. I tried using the Polar Grid tool but I didn't get as close as the end result.
Any help is much appreciated. Thank you!

Use the radial raster tool, make the object slightly bigger than the result should be.
Select the circles with the Group Selection Tool and hold down the alt and shift key to resize them.
Fill them with color and expand the width to the gap you will need later.
Flatten Transparency to expand strokes
Delete Black (and the inner blue parts)
With the Anchor Convert Tool convert the inner anchors into corners

Similar Messages

  • How can I feather the vector mask (path) of a shape layer in CS6?

    How can I feather the vector mask, i.e. path of a shape layer in CS6?
    The corresponding slider in the properties pallette is alway grayed out and unmovable for me when dealing with shape layers. Is there a trick to it, or ist it really not possible at all? (In CS5 you can feather any vector mask via the mask pallette, although the mask's behavior is most of the times quiet buggy after doing so.)
    Or is there any other way to non-destructably blur a shape in CS6? (I know I can create a smart object and use a blur filter on it, but that's not really what i'm after.)
    Thanks in advance for any help on this.
    Reiz

    Start from the beginning
    - Select the Rectangle Tool - go to Options Bar, ensure 'Shape' options is on from the the Pick a Tool Mode drop down list.
    - Draw Rect. This should create a vector Shape Layer.
    - Select it in the Layers Panel: The Properties Panel then should highlight the Density and Feather options.
    What happens here when you drag the Feather slider? On my end it feathers the vector shape as a whole.
    If you need further masking capabilities, then apply a Layer Mask to the Shape and proceed with the Properties Panel Density/Feather options.
    h

  • My HP computer's hard drive crashed.  I have replaced the hard drive and reinstalled all of the software.  I have copied my I tunes library from my backup hard drive to the new one.  How do I restore the permissions?  This is the 3 rd time I have had to d

    My HP computer's hard drive crashed.  I have replaced the hard drive and reinstalled all of the software.  I have copied my I tunes library from my backup hard drive to the new one.  How do I restore the permissions?  This is the 3 rd time I have had to do this.  THe share screen says you are limited to 5 ??

    No backup is not good.
    You can transfer itunes purchases from an ipod.  File>Transfer Purchases

  • I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do?  How can I get the data off this disc?  I can see it has been already burned, so files are on there?

    I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do?  How can I get the data off this disc?  I can see it has been already burned, so files are on there?

    Try cleaning the lens and see if that will restore functionality to the DVD drive.  Use a DVD lens cleaning disk, if you have a can of compressed air, shoot some into the slot or wrap a fine microfiber cloth (eyeglasses cleaning cloth)  around a business card and insert it gently inside the slot.
    If no success, make an appointment at an Apple store genius bar and get a free diagnosis from them.
    Ciao.

  • How do you configure the server in this situation?????????????

    Hi,
    We have Oracle 10.2 and Windows 2003.
    We have Oracle on Cluster (with Windows software).
    When the System are without cluster all it’s OK!!!!!!
    We have 2 Resources Cluster Group: Oracle and Applications.
    We have Oracle in Oracle cluster group.
    We have “W” Drive and a ftp program in Application cluster group.
    We have C drive in both nodes. We have installed Oracle in both nodes but we have “W” drive only associate to the Active Node because is a Cluster resource (Application cluster group).
    All days we receive text files by ftp and we put it on W Drive. This text files are readen with external tables in Oracle.
    We have a problem when oracle fails and it goes to the another node (for ex. node2) because the external tables fail because the files are on Node1 on W Drive. If we move manually Applications cluster resource to Node2 then all it is OK.
    We think to put UNC pathes instead of “W” but it’s not possible (Metalink: Note:290703.1)
    How do you configure the server in this situation?????????????
    Thanks!

    We run a similar configurations and i doubt you have a chance other then reconfigure your setup. The way we do it is to have an ftp client in our database group and periodically transfer the files a second time (not elegant but it's working).
    If that's not an option you might be able to use unc names in your ftp server and set the ftp root to a directory hosted on a disk which is part of the database group.
    Or move to unix (that's what we do now). Than you don't have to bounce your server once in a month to apply security patches...

  • I HAVE TO INSTAL A PRODUCT C LLED "KUDANI AIR " . FAILURE TO DO SO IS BASED ON  ADOBE AIR , SO I AM TOLD . HOW CAN I MAKE SURE THAT IS THE CASE ?? HOW CAN I SOLVE THE PROBLEM IF THIS IS THE CASE ??

    I HAVE TO INSTALL A PRODUCT CALLED "KUDANI AIR " . FAILURE TO DO SO IS BASED ON  ADOBE AIR , SO I AM TOLD . HOW CAN I MAKE SURE THAT IS THE CASE ?? HOW CAN I SOLVE THE PROBLEM IF THIS IS THE CASE ??

    if you try to install an app that depends on adobe air, you should be prompted to download and install adobe air (unless it's already installed).
    you can download and install directly so you're not prompted by that app, Adobe - Adobe AIR

  • Why do I get and how do I correct the message _ This video is only available in the US - when I am in the US - I am trying to view Downton Abbey on my Ipad using the PBS app.?

    why do I get and how do I correct the message _ This video is only available in the US - when I am in the US - I am trying to view Downton Abbey on my Ipad using the PBS ipad app.? Thanks for your help

    Privacy is an Option in the Settings App, its not in Safari as that applies only to Safaris browsing.  Its called Privacy in  IOS 6  In previous versions the same thing can be found under Location Services.

  • How do you set the time for this forum??? Not in nerd pleas

    how do you set the time for this forum?

    There were problems with the correct time display for postings, and based on another recent post this doesn't seem to have been fixed. My advice... don't worry about it.

  • How Can I change the Authentication for this Dynpage

    Hello ,
    I have created a rss feed in special Dnypage.   When I try to connect with rss reader  to dynpage it occurs an error 500.  The problem is that no logon screen appears and the portal would start the Dynpage with the User Guest.
    How Can I change the Authentication for this Dynpage ? I need a LogonScreen
    RSS URL:
    /irj/servlet/prt/portal/prtmode/rss/prtroot/com.geberit.ep.uwlquick.uwlquickstarter?mode=rss

    Hi ,
    sry the entry in xml does not help. No Logon Prompt
    <?xml version="1.0" encoding="UTF-8"?>
    <application>
      <application-config>
        <property name="SecurityArea" value="NetWeaver.Portal"/>
        <property name="Vendor" value="xx.com"/>
        <property name="PrivateSharingReference" value="com.sap.portal.htmlb,com.sap.portal.pcd.glservice,com.sap.portal.ivs.iviewservice,usermanagement,,com.sap.netweaver.bc.uwl"/>
      </application-config>
      <components>
        <component name="uwlquickstarter">
          <component-config>
              <property name="SafetyLevel" value="no_safety"/>
            <property name="ClassName" value="com.xx.portal.uwl.uwlquickstarter"/>   
          </component-config>
              <component-profile>
                   <property name="AuthScheme" value="default"/>
              </component-profile>
        </component>
      </components>
      <services/>
    </application>

  • How do I solve the issue of this message "you do not have enough access privileges for this operation" on my iTunes?

    How do I solve the issue of this message "you do not have enough access privileges for this operation" on my iTunes? I already went to the folder of iTunes inside the Finder and change all permissions to allow read and write... no improvement at all. Any help? thanks!

    Hi! I just realized I have two folders called library, one is inside HD alongside with System and users, then I have also "library" inside users, some of the folders are apparently repeated, some are missing. And all the music is inside a folder called iTunes Music, inside Music, inside users. Now that I relaized some folders are repeated I applied to all related to iTumes r/w permission. But the annoying message keeps coming on.
    And yes, I am using Leopard, 10.5.8.
    Any ideas?

  • HT4972 How do I initiate the steps in this article?

    How do I initiate the steps in this article?

    Here are the contents of the article -
    iOS 4: Updating your device to iOS 5 or later
    Summary
    To update your iPhone, iPad, or iPod touch from iOS 4 to iOS 5 or later, you must erase and restore your device first, before completing the update.
    Products Affected
    iPad, iPhone, iPod touch  
    As part of the update and restore process, iTunes will (in order):
    Back up key elements of your device, such as settings, Contacts, Calendars, Notes, and your Camera Roll1. iTunes will not, however, back up media content from your iOS device, such as music, apps, books, movies, and TV shows.
    Update your device to the latest version of iOS software.
    Restore your device from your most recent backup.
    Restart your device.
    Sync back media content from your iTunes Library to your device2.
    If you are attempting to update using a Mac or PC with which you normally sync  You may see the following iTunes message: 
    Follow these recommended steps before updating your iOS device:
    Transfer purchases3 to your computer.
    Back up your device by syncing it with your Mac or PC first.
    If you are attempting to update using a Mac or PC with which you do not normally sync  Only the content that is stored in the backup will be restored back to the device after the update is complete. Attempting to do this may result in iTunes alerting you with the following message: 
    If you must update your device on a Mac or PC you don't normally sync with, follow these recommended steps before updating:
    Review what is stored in a backup.
    Transfer purchases3 and sync your device with the computer you normally use.
    Additional Information  Notes: 
    Completing your backup may take some time, depending on the amount of content on your iOS device.
    If you are updating your iOS device on a computer with which you do not normally sync , or if you disconnect your device before the sync process is complete, you may notice that some media content that was previously on your device is no longer there. You can restore this content by syncing with the Mac or PC with which you normally sync.
    Movie rentals purchased directly from your device will not get transferred to your computer when you sync and transfer your purchases.

  • How can I improve the performace of this?

    I have two tables - TableA and TableB. TableB is having 500,000,000 rows. I need to insert these rows, after some processing on them, into tableA. My insert statement is like this -
    Insert into tableA
    select A,B,C,...
    from TableB
    How can I improve the performace of this?
    Here it will select 500,000,000 rows from TableB and store the result in cache and then start inserting.
    Do I have any way so that the select statement starts releasing the records (and not wait upto 500,000,000 record ) and in parallel insert statement start inserting the records?

    Shirish,
    You need to insert more than 500 millions of rows in a table, right ?
    But one point can be a problem, this is when you said "I need to insert these rows, after some processing on them". What does that means after some processing ?
    Please give us more information about all your process, maybe the problem doesn't come from the insert itself ?
    And why the APPEND hint cannot be an answer ?
    And why create table cannot be an answer ?
    What time did you expected for insert of these 500 millions of rows ?
    Nicolas.

  • TS3694 how can i resolve the issue of this error 1015?

    how can i resolve the issue of this error 1015?

    Google it. You can not get help for your jailbroken phone here.

  • I have Point, how can I get the component of this Point?

    Hi, everybody!
    Can U help me!
    I have 10 block in 1 applet. After 1 even, I kept the Point of the block, just made even. I want remove the block, which have the point. Then I use method getComponentAt() but I can't.
    Anyone tell me the way to process.
    Agains, I have the Point, how can I get the component of this Point?
    Thanks so much!

    That makes no difference, as you can still use this method with AWT.
    // parent is you main Frame or Dialog window.
    Component parent;
    // target is the AWT component that the user has clicked on.
    Component target;
    // "e" is is your click event.
    MouseEvent e;
    target = SwingUtilities.getDeepestComponentAt(parent, e.getX(), e.getY());

  • HT2534 What is iTune gift card? How can i get the code from this?

    What's iTune gift card? How can i get the code from this?

    "What's iTune gift card?"
    It is a gift card like any other gift card.  It is a card that contains credit for purchases in the itunes store.
    "How can i get the code from this?"
    Genreally there is a scratch of area under which the code lies.

Maybe you are looking for