How Do I Request A New Cabinet To Be Installed?

Hello Everybody!
Long story short, I'm getting FTTC this month and I have found out the my uplift will be 2.49. With my download speed reaching a maximum of 0.23Mbps, it has been figured out that my MAXIMUM download speed when I recieve FTTC will be 0.5727Mbps.
This is obviously extremely slow for aa FTTC service and according to BT, they will not accept me as a BT Infinity customer due how slow it will be.
BT said that the upift was calculated by the distance from your house to the cabinet.
To my knowledge (as there is no map of BT cabinets), there is 1 cabinet in the central part of the village, 1 on the a road that leads towards the village and 1 on the outskirts (according to people in my village - not certain though).Unlike most areas in the UK, there is not a cabinet on the end of each street.
I live approximately 643 Metres (according to Google maps who say it is 0.4 Miles) away from the cabinet, and some people are even further away from it!
Is it possible (especially with the FTTC being installed soon) to have a new cabinet installed in my village?
Thanks in advance!

Scotty141 wrote:
Hello,
Thank you for your comments, however this is quite saddening news.
Please note that I have not yet recieved FTTC and therfore I do not have a cabinet next to my current cabinet.
Also, the results show:
Your exchange is ADSL enabled, and our initial test on your line indicates that your line should be able to have an ADSL broadband service that provides a fixed line speed up to 1Mbps. However due to the length of your line the 1Mbps service may require an engineer visit who will, where possible, supply the broadband service
Our test also indicates that your line currently supports an estimated ADSL Max broadband line speed of 2.5Mbps; typically the line speed would range between 1.5Mbps and 3.5Mbps.
Our test also indicates that your line currently supports an estimated ADSL2+ broadband line speed of 2.5Mbps; typically the line speed would range between 1Mbps and 4Mbps.
The actual stable line speed supportable will be determinedduring the first 10 days of use. This speed may change over time, to ensure line stability is maintained.
If you decide to place an order, a further test will be performed to confirm if your line is suitable for the service you wish to purchase.
Thank you for your interest.
In that case your first post:
quote: Long story short, I'm getting FTTC this month
is wrong.
Fibre is not available to you
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Similar Messages

  • I need to send my iphone in for a repair, a box to do so was sent to me but it has expired, how do i request a new one or at least the sticker?

    I need to send my iphone in for a repair, a box to do so was sent to me but it has expired, how do i request a new one or at least the sticker?

    Repeat the process you used to obtain the first box.

  • How do we request a new forum?

    I'd like to request a new forum for discussing programming on the iPhone. Now that the SDK came out, I'm sure that there's going to be a LOT of traffic on that. It would be nice to keep it all in one place.
    How do we go about making that happen?

    The current developer forums are here:
    http://discussions.apple.com/category.jspa?categoryID=164
    Apple also has mailing lists related to development:
    http://lists.apple.com/mailman/listinfo

  • How can I Request a new App. that hasn't been made yet?

         I'm in a car club with many car enthusiasts that use there iPads, iPhones, and iPods on their cars. This is done by using a car programmer that can link with Apple devices by Bluetooth. These programmers  are designed to unlock your vehicles hidden performance potential by wirelessly re-calibrating your vehicle's computer for maximum horsepower and torque, increased throttle response, firmer shifts and even increased fuel mileage. They are the first and only made for iPod, iPhone or iPad vehicle tuner and OBDII monitoring product on the market. The programmers include a wireless interface that plugs directly into your vehicles OBDII diagnostic connector and communicates with your Apple device via a secure Bluetooth wireless connection. By optimizing your vehicle's fuel and spark curves, they will make your vehicle run more efficiently, increasing MPG, and performance you can feel in the driver seat! Features include:  On screen virtual gauges with adjustable warning/alert lights., Monitor vehicle engine data/parameters via virtual gauges., User selectable gauge themes and gauge layouts., Monitor multiple engine parameters in real time., Diagnose your vehicle's DTC codes ., 0-60 MPH test., 1/8 mile and 1/4 mile test., Top speed test., Braking test.
         These car enthusiasts have very rear cars, expensive cars, or both and don't want to mount or hold the Apple devices while driving at high speeds but at the same want to see the information on the Apple devices. Most of these enthusiasts and I set the devices on the dashes of our cars. This is when I noticed the reflection on the windshield. There are car brand that offer an option that has been know as H.U.D. ( Heads Up Display ).
    I was wondering if there is or if it was possible to make an App. that could mirror the display on the Apple devices? So when the display reflects off the windshield it will not be backwards. This will be a much safer way for the driver to be more aware of every thing going on around him/her while driving. This will optimize the drivers alertness and minimize the times the drive would look away from the road to see his/her gauges.
    Products used together:
    Mac mini
    iPad 3
    iPhone 4s
    SCT Performance iTSX Wireless Tuner
    2007 Ford Mustang GT 800hp+ ( With twin turbo and many more up grades)

    If you find a somewhat similar app, go to the developer's web page and send your request.
     Cheers, Tom

  • I am trying to rebuild my mac, which previously had Lion, but drive crashed. The app store no longer shows that I purshased Lion, how do I get a new copy of the install.  My mac does not suport Mountain lion?

    How do I get a copy of the Lion installer, which I previously purchased?  My drive crashed and I am trung to rebuild it.

    See if this helps:
    Mac App Store- Hiding and unhiding purchases

  • Where/How do I get a new disk image to install from

    I'm a linux guy so I am used to just downloading the latest... where can I get an image to install from?
    I have a Mini PCC and want to completely refresh the thing...

    Welcome to Apple Discussions!
    What's a Mini PCC? Are you talking a PowerPC Mac Mini?
    And the latest what? Mac OS X, except for incremental updates, which this forum is about is not available for download (you can download the update from 10.4 to 10.4.7 for instance, if that's what you want, but you can't download the full 10.4.7 from scratch). Macs can run the operating system they came with or newer retail operating system up to what specs allow. Macs can also run Linux, though Mac OS X is itself very much like Linux as it has both an XWindows environment and a simple ANSI terminal with a bourne shell into its FreeBSD based command line. So the question becomes what you are going to try to run on your computer?

  • How to request a new router (or if I should)

    My router needs to be reset constantly- either turned off or unplugged, virtually every day. How do I request a new router?
    May I add, it's so old that it's not listed on the troubleshooting page.

    beckweena wrote:
    My router needs to be reset constantly- either turned off or unplugged, virtually every day. How do I request a new router?
    May I add, it's so old that it's not listed on the troubleshooting page.
    You can call them, go to a fios store, or might even be able to do it under your acccount online under  > add change services under my verizon. Just click on equipment.

  • How to request a new (second) contract

    According to the iTunesConnect Developers Guide, I should be able to request a new contract on the Manage Your Contracts screen. I am the Admin. and I only see the one Contract (which is in process). There is no checkbox, as shown on p. 23, p. 23, "Requesting a Contract". I want to add (request) a second contract. How do I submit that request?

    beckweena wrote:
    My router needs to be reset constantly- either turned off or unplugged, virtually every day. How do I request a new router?
    May I add, it's so old that it's not listed on the troubleshooting page.
    You can call them, go to a fios store, or might even be able to do it under your acccount online under  > add change services under my verizon. Just click on equipment.

  • How can i create a new transport request?

    Dear Experts,
    Some colleagues have to modify a master record, but save time, failing to produce a request no., then, how can i create a new transport request?
    Wilson

    Hi,
    Please let us know about the issue when you create the new Transport request .
    In which system you are creating the request . Hope its in Development  .
    If so , check the entries are enabled in SCC4 > Changes without automatic recording
    Changes to repository objects and cross client customizing allowed .
    Protection level 0
    If these entries are enabled, you must be able to create Transport requests.
    Please check and update .
    Regards,
    Nibu

  • My iPhone5 prompts while setting up "This iPhone is not currently setup to work with carrier you are attempting to use.Please insert another SIM card from a supported carrier" or "Request that this iPhone be unlocked" How can I unlock my new iPhone5 ?

    My iPhone5 prompts while setting up "This iPhone is not currently setup to work with carrier you are attempting to use.Please insert another SIM card from a supported carrier" or "Request that this iPhone be unlocked" How can I unlock my new iPhone5 to function properly?

    That means that the phone is locked to a carrier other than the one you are trying to use.
    ONLY the carrier it is locked to can authorize unlocking it.
    Where exactly did you get this "new" iPhone 5?

  • I lost my Serial number for InDesign and need it to load InDesign not my new iMac. How can I request my number from Adobe?

    I lost my Serial number for InDesign and need it to load InDesign not my new iMac. How can I request my number from Adobe?

    Could it be registered under a different identity? I've used three identities over the years to register stuff, so I have to do some looking around to find stuff. Try old email addresses as possible IDs.

  • How do I stop Firefox from opening all of my firefox sessions when I request a new window? If I have more than one window open and minimized at bottom of screen ...

    any time I request a new session all sessions are opened and presented on the screen.

    -> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
    -> go to Help Menu -> select '''Restart with Add-ons Disabled'''
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> go to View Menu -> Toolbars -> unselect All Unwanted/Incompatible Toolbars
    -> go to Tools Menu -> Clear Recent History -> '''Time range to clear: select "EVERYTHING"''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache''' -> click '''Clear Now'''
    -> go to Tools Menu -> Options -> General -> '''When Firefox starts : select "Show My Home Page"''' and click '''Reset to Default''' button
    -> go to Tools Menu -> Options -> Content -> place Checkmark on '''Block Pop-up windows''' -> click '''Exceptions...''' and click '''Remove All Sites'''
    -> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Remember History"'''
    -> go to Tools Menu -> Options -> Security -> place Checkmarks on:
    1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries
    -> Click OK on Options window
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious/Incompatible Extensions (Add-ons)
    -> go to Tools Menu -> Add-ons -> Appearance section -> REMOVE All Unwanted/Suspicious/Incompatible Themes (Persona)
    -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons and Themes later. Check and tell if its working.

  • 1. Power supply connected to new Cabinet - how lon...

    2. How long does it take for BT Engineer to install new phone socket once order placed?
    3. Has anyone tried the Billion BiAPC 8200N. I'm happy with the Hub 3 and expect the VDSL2 modem from BT to be OK. But a one box solution with 300Mpbs WLAN might be better.
    4. Finally does anyone here use Windows Home Server to stream content via DLNA and to do backups. A server has many advantages over a Laptop. Not least of all potentially massive storage. I think a WHS would fit in well with my PC, Xbox 360, Android phone setup.

    1. Your guess is as good as any.
    2. Usualy 7 days.
    3. I believe so, search the forums.
    4. Yes I have the readyNAS duo setup, works great via my two smart TV's.
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

  • How do you request new music

    I want to download ed sheeran - make it rain. I can't find it anywhere on spotify but it's track 6 on volume 4 of sons of anarchy album which can be downloaded from iTunes. How do I request that it gets added to spotify?

    You can submit suggestions for the iTunes Music Store through the feedback page. Whether or not your suggestion will ever be acted upon will depend on a number of factors, some out of Apple's control (to start with, the artists and record companies have to be willing to license the tracks to Apple), so don't expect instant action.

  • How can I create a new table in a MySQL database in MVC 5

    I have an MVC 5 app, which uses MySQL hosted in Azure as a data source. The point is that inside the database, I want to create a new table called "request". I have already activated migrations for my database in code. I also have the following
    code in my app.
    Request.cs: (inside Models folder)
    public class Request
    public int RequestID { get; set; }
    [Required]
    [Display(Name = "Request type")]
    public string RequestType { get; set; }
    Test.cshtml:
    @model Workfly.Models.Request
    ViewBag.Title = "Test";
    <h2>@ViewBag.Title.</h2>
    <h3>@ViewBag.Message</h3>
    @using (Html.BeginForm("SaveAndShare", "Home", FormMethod.Post, new { enctype = "multipart/form-data" }))
    @Html.AntiForgeryToken()
    <h4>Create a new request.</h4>
    <hr />
    @Html.ValidationSummary("", new { @class = "text-danger" })
    <div class="form-group">
    @Html.LabelFor(m => m.RequestType, new { @class = "col-md-2 control-label" })
    <div class="col-md-10">
    @Html.TextBoxFor(m => m.RequestType, new { @class = "form-control", @id = "keywords-manual" })
    </div>
    </div>
    <div class="form-group">
    <div class="col-md-offset-2 col-md-10">
    <input type="submit" class="btn btn-default" value="Submit!" />
    </div>
    </div>
    @section Scripts {
    @Scripts.Render("~/bundles/jqueryval")
    HomeController.cs:
    [HttpPost]
    public ActionResult SaveAndShare(Request request)
    if (ModelState.IsValid)
    var req = new Request { RequestType = request.RequestType };
    return RedirectToAction("Share");
    The point is that, I want the user to fill the form inside the Test view and click submit, and when the submit is clicked, I want a new entry in the new table to be created. But first of course I need to create the table. Should I create it using SQL query
    through MySQL workbench? If yes, then how can I connect the new table with my code? I guess I need some DB context but don't know how to do it. If someone can post some code example, I would be glad.
    UPDATE:
    I created a new class inside the Models folder and named it RequestContext.cs, and its contents can be found below:
    public class RequestContext : DbContext
    public DbSet<Request> Requests { get; set; }
    Then, I did "Add-Migration Request", and "Update-Database" commands, but still nothing. Please also note that I have a MySqlInitializer class, which looks something like this:
    public class MySqlInitializer : IDatabaseInitializer<ApplicationDbContext>
    public void InitializeDatabase(ApplicationDbContext context)
    if (!context.Database.Exists())
    // if database did not exist before - create it
    context.Database.Create();
    else
    // query to check if MigrationHistory table is present in the database
    var migrationHistoryTableExists = ((IObjectContextAdapter)context).ObjectContext.ExecuteStoreQuery<int>(
    string.Format(
    "SELECT COUNT(*) FROM information_schema.tables WHERE table_schema = '{0}' AND table_name = '__MigrationHistory'",
    // if MigrationHistory table is not there (which is the case first time we run) - create it
    if (migrationHistoryTableExists.FirstOrDefault() == 0)
    context.Database.Delete();
    context.Database.Create();

    Hello Toni,
    Thanks for posting here.
    Please refer the below mentioned links:
    http://azure.microsoft.com/en-us/documentation/articles/web-sites-dotnet-deploy-aspnet-mvc-app-membership-oauth-sql-database/
    http://social.msdn.microsoft.com/Forums/en-US/3a3584c4-f45f-4b00-b676-8d2e0f476026/tutorial-problem-deploy-a-secure-aspnet-mvc-5-app-with-membership-oauth-and-sql-database-to-a?forum=windowsazurewebsitespreview
    I hope that helps.
    Best Regards,
    Sadiqh Ahmed

Maybe you are looking for