How do I request help for an Acrobat search efficiency question?

I have had a search time degradation of 60x-70x when I switch to Acrobat X or XI (went from 14 seconds on v9.5 to 841 seconds with X or 991 seconds seconds with XI). I am trying to find out where I can ask about this to see what I can do to improve the speed of my searches.
Is this forum a good place to ask? My prior posting was at:
http://forums.adobe.com/message/5338121#5338121
Thanks.

The PDF files I search are fairly large. I was told they are "text under image". They represent the pages of an organization's bimonthly journal over the course of 80 years. There are 16 files, averaging about 800 pages per file -- totalling around 600MB. The ability to search across all those pages in 14 seconds rather than 1000 seconds is greatly desired.
What kind of additional information would be appropriate and helpful? Should I repost the details I had included under the other forum? Are there other tests I should try?
Am I the only one who has had this kind of issue? I searched to find similar discussions or articles but had found none.
Is this the appropriate forum in which to follow up as a discussion?
BTW -- Best regards, and thanks for your feedback.

Similar Messages

Request help for purchasing HD webcams using iMac, OSX &Lion

I am requesting help for purchasing a HD webcam using iMac, OSX &Lion. Any suggestions would help. The following is what I've done so far...
I purchased Logitech's HD C910 webcam. It was a mess in requards to freezing up, no zoom and most of all no adjustments in: contrast, hue, color, etc. You're stuck just like a car with no engine or wheels who wants that. The other Logitech products i.e. Pro 9000 is being discontinued with no software updates in the future and the same with the other products. Most of the other manufactures do not provide software that is really compatible provideing true HD with full features. I'm willing to spend around $199,00 or so. Any suggestions?

Well I found my own answer to the webcam concern that I had ....I bought the Logitech C-910...Yes, I know the Logitech states their software is not compatible with OS X ...That's OK, I only use the basics supplied by Logitech to open the cam...Logitech does supply HD settings which are useful. I like the wide angle which is there to play around. Then I use a software program called "Webcams Settings" found at Apple's App Store. There is a small charge for this download but more than worth it to have a fully functioning system. The best way to get there is obliviously via your "Dock." Click on the icon and type in "Webcam Settings" in the top right portion of the page and presto....you have all the goodies to play like a professional. i.e.: zoom, pan, tilt, aperture. etc. of course your webcam camera(s) must have the capability to perform these options in order to use them.
Note I have used my webcam for everything you can imagine and have a 60 foot cord (several cords linked together) to go outside (LOL) 'Just love the goodies with "Webcam Settings". I take outstanding pics too if I do say so, please. Funny, I rarely use my cam to Skype but knowing the option is there for me anytime I wish. I my cam to photograph orchids and misc. even portraits and family play photos with my tripod in hand. Just because there is a big road block in your path doesn't mean there aren't other avenues. In the corporate life it's called take a negative and make it a positive or else.......and if you have to gripe then you better have an idea on how to turn it around. -So- I did Logitech and Apple.

How to create REQUEST NUMBER for STANDARD TEXT (SO10)

how to create REQUEST NUMBER for STANDARD TEXT ( t-cODE SO10)

you can do this using program RSTXTRAN .
Text key - object
Text key - name
Text key - ID
Text key - language, then it will store under one transport that can be moved to other system.
check out the following link.
http://help.sap.com/saphelp_47x200/helpdata/en/f4/b4a1ed453611d189710000e8322d00/frameset.htm

How to get F4 help for Standard Text Key of a operation based on Order type

Hi Experts,
How to get F4 help for Standard Text Key (STK) of a operation based on Order type entered in selection screen. The F4 help should give the STK of related order type. At the same time the F4 help for Task Types based on Notification type. How to acheive the above two. Please provide the table names or any search help name if exists or Function modules...
Thanks in Advance.
Regads,
Bujji

Hi Guys,
Any help on this...
Regards,
Bujji
Edited by: Bujji on Dec 22, 2008 12:42 PM
Edited by: Bujji on Jan 5, 2009 2:00 PM

How can I get help for ADE downloads from the public library. I am suddenly getting error messages

How can I get help for ADE downloads from the public library. It worked for years and now I am getting error messages. I cannot find any practical help

If you are trying to open the book on a device, try using the latest DL Reader on Android and iOS
https://play.google.com/store/apps/details?id=com.datalogics.dlreader&hl=en

How to add F1 help for a field on ALV grid

Hi All,
When we execute a program, the output is displayed using ALV grid.
on the ALV grid, if we press F1 on a field, it should popup the help document.
How to add F1 help for a field on ALV grid.
Thank you all in advance.

fill field LVC_S_FCAT-ROLLNAME of your fieldcatalog in method SET_TABLE_FOR_FIRST_DISPLAY
A.

How can i send email for suport to rest my questions' please helpe'

how can i send email for suport to rest my questions' please helpe'

You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(109789)

How long should it take for an answer on a question Cisco agree's is a good question and agree to work on it?

Guys,
How long should it take for an answer on a question Cisco agree's is a good question and agree to work on it?
I have an RVS-4000 and it sends me error message by email on errors. Yet I do not have any documentation on what these error messages mean. I asked these question last May and still have not received any answers.
I was told it had been forwarded to a engineer for creatation of this documentation in May. Here we are...
Do any of you agree we need this type of documentation on our Routers? I think it should have been created before these where sold and included with these Routers. Maybe if we all voted on it. Then It might still happen?
Please add you reply's to this. As it might help to get things moving...
Bruce

I created a track on my computer and added it to iTunes
iCloud only syncs and stores purchases from the iTunes Store.
"With iCloud, the music, movies, TV shows, and other iTunes content you’ve purchased are available to download to your devices".
Apple - iCloud - All your content on all your devices.

How to provide F4 help for a field in table control

Hi Friends,
I have requirement like below.
1.Create one custom transaction code with header and item information.
2.In item level, we will be designed table control to enter/display the data.
3.Table controls first field will be material number and next DOT number (Material may have many DOT numbers) and so on.
4.First user will enter material number in the table controls first rows first field and go to DOT number field.
5.DOT number has drop down option. If user selects drop down box of DOT number, he gets all the DOT numbers available in database. User selects one DOT number and double clicks on it then it will be populated in DOT number field box.
But for point number 5, business wants like when ever user enters material number in table control first field then select DOT numbers drop down then they want to see the particular materials DOT numbers only in the drop down list for selection. Not all DOT numbers available in data base. Same thing should happen for all item lines in table control.
Please see below example.
Assume data base table has 10 DOT numbers. But material number has only 2 DOT numbers. When ever user enters material number in item level table control and selects DOT numbers drop down then it should show only 2 DOT numbers which are related to particular material number. Not all 10 DOT numbers.
Could you please suggest me, how can we achieve this?

Hello,
Check this :-
For POV
Input Help in Dialog Modules
You can call dialog modules in the POV event using the event keyword PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON VALUE-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F4 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. The module <mod> is defined in the ABAP program like a normal PAI module. However, the contents of the screen field <f> are not available, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. You can now program your own value lists in the module. However, this procedure is only recommended if it really is not possible to use a search help. Defining search helps is much easier than PROCESS ON VALUE-REQUEST, since the system takes over some of the standard operations, such as getting field contents from the screen. It also ensures that the F4 help has a uniform look and feel throughout the system. Furthermore, it means that you do not have to reassign input help to fields on each screen.
Despite the introduction of search helps (and search help exits), there are still cases in which you need to use parts of the standard F4 functions directly. In this case, there are some standard function modules that you can use in the POV event. They support search helps, as well as all other kinds of input help, and are responsible for data transport between the screen and the input help. These all have the prefix F4IF_. The most important are:
F4IF_FIELD_VALUE_REQUEST
Calls the input help of the ABAP Dictionary dynamically. You can pass the component names of a structure or database table of the ABAP Dictionary to the function module in the import parameters TABNAME and FIELDNAME. The function module starts the ABAP Dictionary input help for this component. All of the relevant screen fields are read. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
F4IF_INT_TABLE_VALUE_REQUEST
This function module displays a value list that you created in an ABAP program. The value list is passed to the function module as the table parameter VALUE_TAB. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
There are also two function modules - DYNP_VALUES_READ and DYNP_VALUES_UPDATE - that can read the values of screen fields and return values to them during the POV event. For further information, refer to the relevant function module documentation.
Input help in dialog modules
REPORT DEMO_DYNPRO_F4_HELP_MODULE.
TYPES: BEGIN OF VALUES,
CARRID TYPE SPFLI-CARRID,
CONNID TYPE SPFLI-CONNID,
END OF VALUES.
DATA: CARRIER(3) TYPE C,
CONNECTION(4) TYPE C.
DATA: PROGNAME LIKE SY-REPID,
DYNNUM LIKE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB TYPE TABLE OF VALUES.
CALL SCREEN 100.
MODULE INIT OUTPUT.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'CARRIER'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE VALUE_CARRIER INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = 'DEMOF4HELP'
FIELDNAME = 'CARRIER1'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CARRIER'.
ENDMODULE.
MODULE VALUE_CONNECTION INPUT.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = PROGNAME
DYNUMB = DYNNUM
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = DYNPRO_VALUES.
READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
SELECT CARRID CONNID
FROM SPFLI
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE CARRID = FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'CONNID'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CONNECTION'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = VALUES_TAB.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
The input fields have been adopted from the program fields CARRIER and CONNECTION. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
MODULE INIT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON VALUE-REQUEST.
FIELD CARRIER MODULE VALUE_CARRIER.
FIELD CONNECTION MODULE VALUE_CONNECTION.
When the user chooses input help for the individual fields, the following is displayed:
For the Airline field, the POV module VALUE_CARRIER is called. The function module F4IF_FIELD_VALUE_REQUEST displays the input help for the component CARRIER1 of the structure DEMOF4HELP from the ABAP Dictionary, namely the search help DEMOF4DE. The users selection is returned to the screen field CARRIER.
For the Flight number field, the POV module VALUE_CONNECTION is called. The function module DYNP_VALUE_READ transports the value of the screen field CARRIER into the program. The program then reads the corresponding values from the database table SPFLI into the internal table VALUES_TAB using a SELECT statement, and passes the internal table to F4IF_INT_TABLE_VALUE_REQUEST. This displays the internal table as input help, and places the users selection into the screen field CONNECTION.
For POH------------
Field Help
There are three ways of displaying field help for screen elements:
Data Element Documentation
If you place a field on the screen in the Screen Painter by copying a ABAP Dictionary field, the corresponding data element documentation from the ABAP Dictionary is automatically displayed when the user chooses field help (as long as the help has not been overridden in the screen flow logic).
For further information about creating data element documentation, refer to data elements.
Data Element Supplement Documentation
If the data element documentation is insufficient, you can expand it by writing a data element supplement
Data element supplement documentation contains the heading Definition, as well as the following others:
Use
Procedure
Examples
Dependencies
To create data element supplement documentation for a screen, choose Goto ® Documentation ® DE supplement doc. from the element list of the screen. A dialog box appears in which the system proposes a number as the identified for the data element supplement. You can then enter help texts for the above headings using the SAPscript editor.
Data element supplement documentation created in this way is program- and screen-specific. Any data element supplement documentation created in the ABAP Dictionary with the same number is overridden by the screen-specific documentation. You can link existing data element supplement documentation created in the ABAP Dictionary with a screen field by using the table THLPF. To do this, crate a new row in THLPF containing the following data: Program name, screen name, field name, and number of the data element supplement documentation.
To display data element supplement documentation, you must code the following screen flow logic in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> [MODULE <mod>] WITH <num>.
After PROCESS ON HELP-REQUEST, you can only use FIELD statements. If there is no PROCESS ON HELP-REQUEST keyword in the flow logic of the screen, the data element documentation for the current field, or no help at all is displayed when the user chooses F1. Otherwise, the next FIELD statement containing the current field <f> is executed.
If there is screen-specific data element supplement documentation for the field <f>, you can display it by specifying its number <num>. The number <num> can be a literal or a variable. The variable must be declared and filled in the corresponding ABAP program.
You can fill the variables, for example, by calling the module <mod> before the help is displayed. However, the FIELD statement does not transport the contents of the screen field <f> to the ABAP program in the PROCESS ON HELP-REQUEST event.
For further information about data element supplement documentation, refer to Data Element Supplements.
Calling Help Texts from Dialog Modules
If data element supplement documentation is insufficient for your requirements, or you want to display help for program fields that you have not copied from the ABAP Dictionary, you can call dialog modules in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON HELP-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F1 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. However, the contents of the screen field <f> are not available in the module <mod>, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. The field help should not be dependent on the user input.
The module <mod> is defined in the ABAP program like a normal PAI module. The processing logic of the module must ensure that adequate help is displayed for the field in question. Instead of calling an extra screen with text fields, you should use one of the following function modules to display a suitable SAPscript document:
HELP_OBJECT_SHOW_FOR_FIELD
This function module displays the data element documentation for components of any structure or database table from the ABAP Dictionary. You pass the name of the component and structure or table to the import parameters FIELD and TABLE.
HELP_OBJECT_SHOW
Use this function module to display any SAPscript document. You must pass the document class (for example, TX for general texts, DE for data element documentation) and the name of the document to the import parameters DOKCLASS and DOKNAME. For technical reasons, you must also pass an empty internal table with the line type TLINE to the tables parameter of the function module.
For further information about how to create SAPscript documents, refer to the Documentation of System Objects documentation.
Field help on screens.
REPORT DEMO_DYNPRO_F1_HELP.
DATA: TEXT(30),
VAR(4),
INT TYPE I,
LINKS TYPE TABLE OF TLINE,
FIELD3, FIELD4.
TABLES DEMOF1HELP.
TEXT = TEXT-001.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE F1_HELP_FIELD2 INPUT.
INT = INT + 1.
CASE INT.
WHEN 1.
VAR = '0100'.
WHEN 2.
VAR = '0200'.
INT = 0.
ENDCASE.
ENDMODULE.
MODULE F1_HELP_FIELD3 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
EXPORTING
DOKLANGU = SY-LANGU
DOKTITLE = TEXT-002
CALLED_FOR_TAB = 'DEMOF1HELP'
CALLED_FOR_FIELD = 'FIELD1'.
ENDMODULE.
MODULE F1_HELP_FIELD4 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW'
EXPORTING
DOKCLASS = 'TX'
DOKLANGU = SY-LANGU
DOKNAME = 'DEMO_FOR_F1_HELP'
DOKTITLE = TEXT-003
TABLES
LINKS = LINKS.
ENDMODULE.
The next screen (statically defined) for screen 100 is 100. It has the following layout:
The screen fields DEMOf1HELP-FIELD1 and DEMOF1HELP-FIELD2 from the ABAP Dictionary and the program fields FIELD3 and FIELD4 are assigned to the input fields. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON HELP-REQUEST.
FIELD DEMOF1HELP-FIELD2 MODULE F1_HELP_FIELD2 WITH VAR.
FIELD FIELD3 MODULE F1_HELP_FIELD3.
FIELD FIELD4 MODULE F1_HELP_FIELD4.
The components FIELD1 and FIELD2 of structure DEMOF1HELP both refer to the data element DEMOF1TYPE. This data element is documented, and also has two supplements with numbers 0100 and 0200.
The following field help is displayed:
When the user chooses F1 on the input field for DEMOF1HELP-FIELD1, the data element documentation for DEMOF1TYPE is displayed, since the field does not occur in the PROCESS ON HELP-REQUEST event.
If the user chooses F1 repeatedly for the input field DEMOF1HELP-FIELD2, the data element documentation is displayed, along with the supplement documentation for either 0100 or 0200 alternately. The variable VAR is filled in the dialog module F1_HELP_FIELD2.
When the user chooses F1 on the input field for FIELD3, the data element documentation for DEMOF1TYPE is displayed, since this is called in the dialog module F1_HELP_FIELD3 by the function module HELP_OBJECT_SHOW_FOR_FIELD.
When the user chooses F1 on the input field for FIELD4, the SAPscript documentation DEMO_FOR_F1_HELP is displayed, since this is called in the dialog module F1_HELP_FIELD4 by the function module HELP_OBJECT.
Regards,
Deepu.K

How to add F4 help for the custom field of a custom table

Hi All,
How to add F4 help to the custom table field? in the table maintainance when user clicks on F4 i want to provide possible values for this field I am trying to write the code in the screen of table maintainace like the following
PROCESS ON VALUE-REQUEST.
FIELD ZTEST_MAH_F4-KUNNR MODULE zVALUE_kunnr .
But when i am double clicking on module it's giving options to create include program but after that it's giving user is currently editing the table i am not getting this can some body clarify my doubt it's gr8 if some body give some examp code
Thanks&Regards
mahesh

Hi,
Create a subroutine under the event and call the following FM
1. Select all the related data into an itab, for ex i_kunnr
2.    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
    DDIC_STRUCTURE         = ' '
       retfield               = 'KUNNR'
    PVALKEY                = ' '
       dynpprog               = sy-repid
       dynpnr                 = '1000'
       dynprofield            = <selection screen field>
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
       value_org              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
      TABLES
       value_tab              = <b>i_kunnr</b>
    FIELD_TAB              =
       return_tab             = < return table >
    DYNPFLD_MAPPING        =
     EXCEPTIONS
       parameter_error        = 1
       no_values_found        = 2
       OTHERS                 = 3

Request help for Simple Itinerary (tricky one)

Hi
I am trying various scenarios for itineraries. I am stuck in simple itinerary solution where i have my schema exposed as (request and reponse) web service and one itineray service to transform it and finally send it back to the WS response.
I tried including Offramp but i guess i will not be able to include the servicename, state, type properties. Can someone help me how i can create itineraries for such instances.
I could able successfully complete the scenario where my schema exposed as web service and then transform and invoke another web service and finally the response of the second web service for sent back my original web service. But the above simple scenario
i am totally baffled.
ram

There are samples inside the ESB Toolkit that show exactly how to invoke a service using the ESB Toolkit. You can find the specific
sample here: C:\Program Files\Microsoft BizTalk ESB Toolkit 2.0\ESBSource\Source\Samples\MultipleWebServices. You will have to first unzip the ESBSource.zip file that comes with the default ESB toolkit installation.
There are also How-to's which are step by step instructions on how to do this inside the ESB documentation. You can get the documenation here:
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=bc86cf1e-ef29-4b19-95f7-388f64555090
Inside the Documentaion under Development Activities there are How-to's which provide step by step instructions on how to Route messages to a Service. (Even though this how to is based off of ASMX, the same principal applies.)
You can also look into earlier MSDN Post in below link
Consume Web Service from ESB Toolkit 2.1
Thanks
Abhishek

How to set F4 help for an inputfiled of BSP page?

hi friends,
I have to set F4 help for a Field in my BSP page. for this i am doing like this.
Oninitialization Event....
tables : t001p ,pa0001 ,t554t.
data : begin of it,
        awart like t554t-awart,
        atext like t554t-atext,
       end of it.
data : it_t554s like it occurs 0 with header line.
parameter : k_pernr like pa0001-pernr.
data : werks like pa0001-werks,
       btrtl like pa0001-btrtl,
       abs_grp like t001p-moabw.
clear it_t554s.
refresh it_t554s.
select single werks btrtl into (werks ,btrtl) from pa0001
                    where pernr = K_pernr.
select single moabw into abs_grp from t001p where
                          werks eq werks and btrtl eq btrtl.
select awart atext from t554t into corresponding fields of it_t554s
                               where moabw eq abs_grp..
append it_t554s.
endselect.
now it_t554s contails the values to display F4 help in BSP page inputfield.
how to assign this as F4 help to inputfield....
I saw some threads. It's getting me to confuse...
I am new to this topic...
plz help me.........
Regards,
Shankar.

solved

How to attach F4 Help for a field in Items Overview in ME21n (PO Creation)

Dear All,
Can anyone pls suggest me how to attach F4 hlp for this (Field is BEDNR).
Best Regards.

Hello,
I'm relatively new in ABAP, and i have the same problem with yours, only in a different field. My company wants to have a search help in Requirement Tracking No. (BEDNR) in table EKPO.
Can you tell me what was your solution?
I tried to attach the existing search help to field BEDNR, but i can't.
Edited by: ellainne22 on Oct 4, 2011 4:34 AM

How to keep f4 help for a particular field in module pool problem-urgent

hi all,
i am displaying output using alv list display. here i am showing my pf status here. in this status i have one button called position. when i click this button it is showing pop up inside this pop up i am showing appln
for this i need keep f4 help. anybody can tell me how to keep f4 help fo this field.
thanks,
maheedhar.t

Hi Maheedhar,
You need to use function module POPUP_GET_VALUES.
If you want see sampl eprogram for this check the program RSSPO410.
Execute this program and input Example2 = X in the selection screen.
Code from the above Program:
DATA: BEGIN OF FIELDS OCCURS 1.
        INCLUDE STRUCTURE SVAL.
DATA: END OF FIELDS,
      RETURNCODE(1)       TYPE C,
      POPUP_TITLE(30)     TYPE C.
POPUP_TITLE       = 'Nachrichten anzeigen'(200).
CLEAR FIELDS.
FIELDS-TABNAME    = 'T100'.
FIELDS-FIELDNAME = 'ARBGB'.
FIELDS-FIELDTEXT = 'Arbeitsgebiet'(202). "Text nicht aus DTEL
APPEND FIELDS.
CALL FUNCTION 'POPUP_GET_VALUES'
       EXPORTING POPUP_TITLE     = POPUP_TITLE
       IMPORTING RETURNCODE      = RETURNCODE
       TABLES    FIELDS          = FIELDS.
IF RETURNCODE = 'A'.
    If Cancel is clicked
ELSE.
    If OK is clicked.
    Table FIELDS congtains the input data.
ENDIF.
Thank you
Ramakrishna

How to provide input help for a variant

Hi,
I have a parameter on the selection screen.
P_layout like disvariant-variant value check.
How do I provide input help for this parameter and also how do i check wheather the input entered is correct or not.

Hi,
You can create a serch help for the field and add it in program like:
P_layout like disvariant-variant match-code object 'Searche help name'.
then if you need to do any validation u can do it at selection screen:
like:
at selection-screen for P_layout.
if..conditions..
regards,

How do I request help for an Acrobat search efficiency question?

Similar Messages

Maybe you are looking for