How do I rescale artboard and content, but keep the same path width

Hi,
I have a project with a lot of artboards with content set-up inside each artboard - actually a series of icons.
I'd like to resize all of the artboards and the content, keeping the same line widths.
I can use the 'save for web' feature to scale the existing artboards/content, but I don't want the line widths to be scaled too.
I have failed to find a script or feature that would allow me to do this and save me from manually resizing every artboard and the content.
I'll immediately hold my hands up to having a minimalist knowledge of illustrator.
Any thoughts? I'm surprised it's not a feature of 'save for web'.
Currently using CS6.
Thanks,
Paul

No, rescaling the paths inside illustrator keeps the path width the same. It's the 'export for web' dialog upscaling the content is also upscaling the path widths. I can understand why it does that, but surprised it it ignores the scaling strokes option and doesn't provide that option itself.
Thanks for the suggestion, though.

Similar Messages

I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

Please post (a relevant section of) it right on this Forum.

How do i have landscape and portrait slides in the same keynote file?

how do i create landscape and portrait slides in the same keynote file?

You cant, its one or the other not both, the slide size setting is for the whole presentation, not for individual slides.
The slide format is chosen to match the display the presentation is shown on. I have presentations showing on vertical, horizontal, square, circular and iregular shaped screens with rear projection, but a single format must still be set.

How to archive my photos from IPhoto to keep the same filing structure

I need to empty my iphoto files as there is too much memory being taken up. i want to export to external hard drive but keep the same filing system so i can access my photos rapidly. every attempt I have made to date mixes all the photos up so there is no structure. help please.

I need to empty my iphoto files as there is too much memory being taken up.
No, iPhoto files take up disk space, not memory. So if you think you're going to save memory be getting rid of them, you need to reconsider that idea.
You can move your entire iPhoto Library to an external drive and import new photos into it on that drive, so if that's what you want to do, these are the steps:
1. Format the external drive as Mac OS Extended (Journaled)
2. Quit iPhoto
3. Copy the iPhoto Library from your Pictures Folder to the External Disk.
4. Hold down the option key while launching iPhoto. From the menu select 'Choose Library' and navigate to the new location. From that point on itl be the default location of your library.
5. Test the new library destination and when you're sure everything is as it should be, delete it on your Macintosh HD.

How do I make Organizer and Editor open at the same time?

I'm new to PSE 10 and want to know how to make Organizer and Editor open at the same time. I can get the Organizer up, but have to pick out a photo and click on Fix: Full Photo Edit to get Editor to open. Is that the only way to do it?
Thanks,
K

Create Desktop shortcuts for the Organizer and the Editor:
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
Ken

How to align output formatted and output text in the same line?

Hi All,
I want an output formatted label and a text on the same line,. I've surrounded these components wth a panel form layout and they automatically align one below the other. how do I kepe them in the same line?
Thanks.

Try as per the code snippet below:
<af:document title="TestPage.jspx" id="d1">
<af:messages id="m1" inline="true"/>
<af:form id="f1">
*<af:panelGroupLayout id="pgl1" layout="horizontal">*
*<af:outputFormatted value="outputFormatted1" id="of1"/>*
*<h:outputText value="outputText1" id="ot1"/>*
*</af:panelGroupLayout>*
</af:form>
</af:document>
Thanks,
Navaneeth

How to use Forms 5 and DevSuite 10g in the same machine

Hello everybody,
I have installed forms 5 and IDS 10g in one machine and both the versions of the forms were working simultaneously. Now I have un-installed both the versions of the forms and re-installed in the same machine. Installation was successful. but I am not able to connect to the database in forms 5. It shows TNS could not resolve service name. TNS is created in both the versions with same name as well as different name. The IDS is working fine. Please help.
Thanks and regards
Sukanta sarkar

Sukanto,
What error are you getting? One potential problem you will have with more than one version of Oracle Dev Suite installed is keeping the TNSNAMES.ORA synchronized. I've found the easiest solution to this problem is to add the TNS_ADMIN registry key to each Oracle Home so I can share a single copy of the TNSNAMES.ORA file. You can add this entry by starting the Window Registry editor (regedt32.exe or regedit.exe) and navigate to the following registry hive:
HKEY_LOCAL_MACHINE => SOFTWARE => ORACLE => HOME? (where ? represents the number of the Oracle Home, eg., 0-9).
In your example, Forms 5 should be in HOME0 and IDS 10g should be in HOME1. Open each home and add a new "String Value" and name it: TNS_ADMIN. After you have added the new String Value entry, edit the String Value and enter the path to the copy of your TNSNAMES.ORA that is working. Then do the same thing with HOME1 and exit the Registry. You should be able to connect to your database with Forms 5 and IDS 10g. Normally, changes to the registry do not require you to reboot your computer, but I have seen where this is necessary - though not very often.
Note: Always ensure you have a BACKUP of the Windows Registry before you make any changes. If you uncomfortable modifying the Windows Regisitry, then I don't recommend you make this change.
Hope this helps.
Craig...

Changin virtual machine OS but keeping the same public IP

I need to change the OS from my vm but I need to keep the same IP, because some organization's firewalls are already configure to allow that ip, and it takes too long to ask them that allow other ip. is there a way to do this? thanks a lot!!!!!!

Hi,
If you talked about the public IP address, then you can do as Manesh said to use a reserved IP address. Or if you have other VMs in the same cloud service, it is also possible to do that. You just need to make sure that not all the VMs in the cloud service
are in the stopped(deallocated) status, then the public IP address of the cloud service won't be changed.
However, it is recommended to use a researved IP address as the researved IP address will not change even when VMs in the cloud service are stop/deallocated.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How do I delete an email account, but keep the email?

I have an email account from ISP that I no longer use. I want to delete the account, but I don't want to lose the email. How do I delete the account and save all of the email?
Can I create a folder and move all of the email from the account I want to delete to the folder? From what I've read so far the email would still be deleted from that folder.
This seems like it would be a common occurrence with a lot of people, so I'm surprised that there is not an solution from Apple. Apple indicates that if an email account is deleted you will lose all of the mail. There should be an option when you delete the account that asks "Do you what to keep all of the email from this account? Yes/No". If yes then the system automatically saves email to an archive folder or something similar.
Hopefully there is an easy workaround solution.

Create a new "On My Mac" mailbox and move the messages to it. Then delete the account.

I have been using pse11 on wondows vista and it has certainly started freezing on starting and I am unable to access the organizer, the editor is ok. Have removed and reinstalled but is the same have changed the files as suggested. Have been unable to ope

I am using pse 11 0n windows vista for years and it has suddenly started freezing on starting, I am now unable to access the organizer it freezes on the blue screen, the editor can be opened. Have removed and reinstalled but is still occurring. Have changed the files as suggested, am unable to open as administrator

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

How do I get itunes and iphoto to have the same files on multiple users?

Every time I upload a disc or photos, they show up on my user profile, but not my wife's. It seems like I am wasting a ton of hard drive space reloading the same things between each user. I tried the "shared" folder, but i am not sure that worked.
Thanks for the help...

I don't think that Thomas's solution will work on 10.5.
There are two ways to share, depending on what you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc. then:
Quit iPhoto in both accounts
Move the iPhoto Library Folder to an external HD set to ignore permissions. You could also use a dmg.
In each account in turn: Hold down the option (or alt) key and launch iPhoto. From the resulting dialogue, select 'Choose Library' and navigate to the new library location. From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
Regards
TD

TS3989 Photos are ok in aperture and iphoto but in photostream on ipad and iphone the top of all portrait photos is chopped off. I tried switching photostream off and on but got the same. Only happened with photos added today, all past photos are fine

I have never had any problems before but all portrait photos added today have the top chopped off. For example , people's heads are missing or roofs or buildings are chopped off. Photos are fine on the camera and on my mac in iphoto and aperture. Switched off photostream on my ipad...all photos were deleted. Switched photostream back on and all photos uploaded again and portrait photos are cropped again

It sounds like while trying to import the photos with insufficient disk space those image files were damaged and not copied fully. Now that you have sufficient space (a minimum of 10 GB is recommended) the latest imports are good.
What do you get if you export one of the problem photos out of iPhoto as Kind=Original and try to open it with Preview. If it appears the same then there's nothing you can to do recover them.
OT

How do I get videos and pictures taken in the same event to show in a slideshow in the order they were taken?

How do I get videos and pictures taken in Photos and the same Event to show in the order they were taken? Pictures and videos are seperated with videos at the end of both Photos and the Event.

You're welcome.
What's likely happened is that when you transferred the video to the new machine they lost their dates.
Photos use the Exif metadata to record the date and time of the shot. This is quite different from the date and time of the file, which can change as the file is copied from place to place. Video doesn't have Exif, and so iPhoto uses the file date, and that's changed.
Simply, there's no absoultely reliable way to date video.
Try assign dates with the Batch Change command under the Photos menu.

How to structure a control and its display in the same while loop and same display panel (instead of display panel and a seperate parameter-setting panel )

As you can see, I need to adjust the Target position to certain value (like 1068.88), the actual position is showing 1066.99. What kind of flow control structure will achive this goal?
Notice the Labview example "Vibration analysis" may shed some light on this issue. Will someone give out a simpler code to show how it works?
Attachments:
Spectrometer Control V3.0.vi ‏113 KB

lightblue,
Just to make sure we are on the same page, you would like to set the position, then monitor it. Is that correct? In that case, you might have a few options. You could have a sequence that would set the position, and then a while loop that would monitor the position, however this wouldn't allow you to update anything else. The other option would be to use parallel while loops, which would be similar to the parallel sequence structure you have below. The only issue with this would be that if you are calling the driver from both loops, you could run into errors. The Vibration Analysis.vi takes the setpoint, then calculates the actual available position, so it won't serve as a very good example, code-wise.
Hope this helps!
Andy F.
National Instruments

How can I upgrade to new versions, but keep the custom look I love icons of the theme I've installed in version 3.6.n ?

When will custom icons in themes be available for the new versions. The stripped down m9inimal version is just not appealing to me.

First, try to determine the reason that Firefox 3.5.10 is hanging or not starting. Since you did not specify, you will need to read some of the following to determine hanging or starting; hanging usually gives you an error message when you try to start Firefox. See below. If you install Firefox 3.6.6 over the top of 3.5.10 and the cause of the hanging or not starting is one or more extensions or plugins or some other cause, Firefox 3.6.6 may experience the same problem.
'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

How do I rescale artboard and content, but keep the same path width

Similar Messages

Maybe you are looking for