How do i rescue my data from a dead iphone 4?

how do i rescue my data (photos, contact, etc) from a dead iphone 4?

chan327 wrote:
... any other way to restore them?
Not if they only exist on the " dead Phone..."

Similar Messages

How do I get my data from my old iphone to a new iphone?

Hi
I backed-up the data from my old iphone via itunes onto my computer. Now, I have "restored" the replacement iphone- or so I thought. There is none of my old info onto this new phone. Help. I am at a loss. Where do I go to get all of my old data- contacts, apps, music, etc...
Thanks,
Cat

Nope.
Something went wrong.
I've done it twice now and followed the directions on http://support.apple.com/kb/HT1766
Doesn't work. I have no contacts indicated and no notes, etc... from my old iphone.
I have an iphone 4 - so there is no SIM card. Maybe I didn't back up the data properly from the old iphone. I haven't deleted anything yet so I guess I could do the whole process over...
No clue.

My software was automatically washedout. i tried through itunes but it downloaded newer version and now how can i transfer my datas from laptop to iphone

i lost software on my iphone 4 IOS 6.1.3
then was asked to link to itunes which then downloaded upgraded version 7.1.
how to get my data on laptop in itunes now onto my i phone

I am having the same issue. Hope someone knows why.

How do I merge TB data from a dead Win 7 computer to a new Win 8.1 computer with TB installed?? The old HD is good and old files are available.

My old Win 7 computer died.
I bought a new win 8.1 computer.
I pulled the HD from the old computer and put it in a SATA/USB case. Everything is there.
I installed T-Bird on the new computer and downloaded current e-mail.
Now I want to merge the thousands of old e-mails that were on the old computer onto the new computer?
What steps should I take?
If necessary, I could live with losing the new e-mails that are now on the new computer.
John

http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Thunderbird
But first save your new inbox, just make a copy outside your profile of
"profile" \mail\"mailaccount"\INBOX (pop-account) or
"profile" \Imapmail\"mailaccount"\INBOX (IMAP-account)
You can then import or move it to your local folders. (under a new name)

After a Lion clean install, how do I retrieve my data from external back-up? Following Apple advice for use of Migration Assistant did not work creating similar issues leading to clean install.

After a Lion clean install, how do I retrieve my data from external hard drive?
Following Apple advice I used Migration Assistant which crashed new system twice which is why I had to clean install Lion in the first place.
Is there a sure way of doing it?
I have only a few programs that I will have to install myself and that should not be a problem.
I just want my data, music and photos back where I can use them.

Time machine backups. I went to migration assistant a few hours ago and limited my selection to "users", no need for applications, settings and other files. Stuff started moving over at a fast pace but has now seemed to stall.
I will let it run overnight as there are lots of songs and photos as well as a few movies.
If that does not work, then I will go into TM and try restore. I have restored some things in the past such a mail files and it has worked well.
The Apple fellow at the store told me to go right into TM, he may have had a point. I'll get it eventually.

I have hierarchy data in R/3 side how will i load that data from R/3 to BW

Hi all,
i have my hierarchy data in the R/3 side how will i load that data from R/3 to BW side
Regard
Kiran Kumar

Hi Kiran,
Here is the procedure:
1.      In the Data Warehousing Workbench under Modeling, select the InfoSource tree.
2.      Select the InfoSource (with direct update) for the InfoObject, to which you want to load the hierarchy.
3.      Choose Additional Functions® Create Transfer Rules from the context menu of the hierarchy table object for the InfoObject. The Assign Source System dialog box appears.
4.      Select the source system from which the hierarchy is to be loaded. The InfoSource maintenance screen appears.
○       If the DataSource only supports the transfer method IDoc, then only the transfer structure is displayed (tab page DataSource/Transfer Structure).
○       If the DataSource also supports transfer method PSA, you can maintain the transfer rules (tab page Transfer Rules).
If it is possible and useful, we recommend that you use the transfer method PSA and set the indicator Expand Leaf Values and Node InfoObjects. You can then also load hierarchies with characteristics whose node name has a length >32.
5.      Save your entries and go back. The InfoSource tree for the Data Warehousing Workbench is displayed.
6.      Choose Create InfoPackage from the context menu (see Maintaining InfoPackages). The Create InfoPackage dialog box appears.
7.      Enter the description for the InfoPackage. Select the DataSource (data element Hierarchies) that you require and confirm your entries.
8.      On the Tab Page: Hierarchy Selection, select the hierarchy that you want to load into your BI system.
Specify if the hierarchy should be automatically activated after loading or be marked for activation.
Select an update method (Full Update, Insert Subtree, Update Subtree).
If you want to load a hierarchy from an external system with BAPI functionality, make BAPI-specific restrictions, if necessary.
9.      If you want to load a hierarchy from a flat file, maintain the tab page: external data.
10.      Maintain the tab page: processing.
11.      Maintain the tab page: updating.
12.      To schedule the InfoPackage, you have the following options:
○       (Manually) in the scheduler, see Scheduling InfoPackages
○       (Automatically) using a process chain (see Loading Hierarchies Using a Process Chain)
When you upload hierarchies, the system carries out a consistency check, making sure that the hierarchy structure is correct. Error messages are logged in the Monitor. You can get technical details about the error and how to correct it in the long text for the respective message.
For more info visit this help pages on SAP Help:
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6729e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/3d/320e3d89195c59e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6729e07211d2acb80000e829fbfe/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4dae0795-0501-0010-cc96-fe3a9e8959dc
Cheers,
Habeeb

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946

How to get the complete data from Webdynpro using a RFC

hi guys,
A form is created in the webdynpro, when that pdf form is called the user have to provide the key field ie the employee number in the form and then when he press the 'go' button a rfc is called and it gives all the details of the employee in the form. Then the user have to input some fields in the form and he have press the submit button. My problem is here, when the user is going to press the submit button that form will be converted to a stream (binary) of data and it is sent to one of the import parameter used in the RFC.
I have created a RFC and created a import parameter of data type XSTRING, since i want to see what exactly R3 is receiving from web dynpro i am writing this contant in the sever as a text file. When i saw that text file i cant see the complete data.
And when i searched in R3 the capacity of xstring is 1024 CHAR, so i dont know how to capture the entire data from webdynpro into my R3.
I give the code what i worte please tell me am i missing anything in my code, or is there any data type which can hold more than 500kb of data which is coming from webdynpro.
FUNCTION ZSEND_MAIL_ATTACHMENT.
""Local Interface:
*" IMPORTING
*"     VALUE(OUT_PLACE_LEVEL) TYPE XSTRING OPTIONAL
*"     VALUE(BIN_DATA) TYPE INDX_CLUST OPTIONAL
*" TABLES
*"      IT_MESSAGE STRUCTURE SOLISTI1
Data Declaration
DATA: gd_cnt TYPE i,
      gd_sent_all(1) TYPE c,
      gd_error TYPE sy-subrc,
      tab_lines LIKE sy-tabix.
Structure Declaration
DATA : BEGIN OF it_file OCCURS 0,
          row(255),
         END OF it_file.
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
Internal Table Declaration
data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
DATA : objbin LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE. "sOLIX
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
data : wa_receiver like table of SOMLRECI1 with header line.
data : it_receiver like table of SOMLRECI1 with header line.
data : v_bin_data like SOLISTI1 occurs 0 with header line.
DATA : gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
*data bin_data1 like table of solix with header line.
REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
DATA V_SUBJECT(255) VALUE 'HI'.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
APPEND GD_DOC_DATA.
Appending The Internal Table it_packing_list
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
*CALL FUNCTION 'GUI_UPLOAD'
*EXPORTING
*filename = V_FILE_PATH
*filetype = 'BIN'
*TABLES
*data_tab = BIN_DATA.
move bin_data to v_bin_data.
append v_bin_data.
*move soli to bin_data.
LOOP AT V_BIN_DATA into objbin.
MOVE v_bin_data TO objbin-line.
    APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'PDF'.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
APPEND it_packing_list.
data file(255) value '/tmp/bali.txt'.
*Appending The Internal Table it_receivers
close dataset '/tmp/bali.txt'.
open dataset '/tmp/bali.txt' for output in text mode encoding default.
if sy-subrc = 0.
loop at objbin.
transfer objbin to '/tmp/bali.txt'.
endloop.
else.
write 'hi'.
close dataset '/tmp/bali.txt'.
endif.
it_receiver-receiver = '[email protected]'.
it_receiver-rec_type = 'U'.
it_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
*Move wa_receiver[] to it_receivers[].
Clear it_receivers.
if i_OUT_PLACE_LEVEL NE 0.
loop at it_receivers into wa_receiver.
   loop at it_receivers into wa_receiver.
**Function Module To Post The Message To Externa Mail
     CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
         document_data              = gd_doc_data
         put_in_outbox              = 'X'
         commit_work                = 'X'
       TABLES
         packing_list               = it_packing_list
         CONTENTS_TXT               = objbin
         receivers                  = it_receivers
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.
     clear wa_receiver.
ENDFUNCTION.

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
   put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

I have forgotten my password for icloud, have an invalid email address and do not know my security answers. How can I transfer all my data from my old iphone to the new one?

I have forgotten my password for icloud, have an invalid email address and do not know my security answers. How can I transfer all my data from my old iphone to the new one?

In this case you won't be able to do that?

How to delete the duplicate data from PSA Table

Dear All,
How to delete the duplicate data from PSA Table, I have the purchase cube and I am getting the data from Item data source.
In PSA table, I found the some cancellation records for that particular records quantity would be negative for the same record value would be positive.
Due to this reason the quantity is updated to target but the values would summarized and got the summarized value of all normal and cancellation .
Please let me know the solution how to delete the data while updating to the target.
Thanks
Regards,
Sai

Hi,
in deleting the records in PSA table difficult and how many you will the delete.
you can achieve the different ways.
1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
3.you can restrict the cancellation records at query level.
Thanks,
Phani.

How Can we get the data from Non-SAP to SAP in WebDynpro

Hi,
I hope u understand my query, How can we get the data from Non-SAP to SAP thru WebDynpro Programming.
Help out with the steps for getting the data or procedure.
Regards,
Mutyapu

You can expose the APIs in the Non-SAP backend as Web Services, and consume them in SAP by creating an Enterprise Proxy. Then these can be called just like normal class methods from Web Dynpro.
Regards,
Nithya

How can I remove safari data from shared iCloud account?

Before iOS 8 and family sharing I was using a single iCloud account shared among several Apple devices in my household. Now that we are all using our own separate Apple Accounts I want to delete shared data from other devices that were using my iCloud account. For example, my wife and I both have data synched with iCloud (the same account) for Safari. Now that her phone has been switched over to her own AppleID, I want to purge the data stored in my icloud account from her device. When I open Safari on my phone, I can see a list at the bottom of tabs that my wife had open on her phone at one time in the past. That list will never get updated now that she is using her own account. So how do I purge old data from other devices off my iCloud account?

If she's on a different account now, Safari data from the previous account should no longer be on her device. iCloud tabs, on the other hand, will persist from a device that is no longer sharing the account for 14 days, after which they are automatically cleared. (This is coming from iCloud, not from her device.) You might try waiting a couple of weeks and see if they aren't automatically removed.
If you're still concerned, you could always ask her to go to Settings>Safari and tap Clear History and Website Data. This won't clear her iCloud tabs from your device though; you'll have to wait for that.

Hi...i bought the new iphone 4 and would like to ask how can i transfer all my data from my old iphone to the new one? If I will do "synchronization" through itunes with the old phone and the plug in the new one will that be the case?

Hi...i bought the new iphone 4 and would like to ask how can i transfer all my data from my old iphone to the new one? If I will do "synchronization" through itunes with the old phone and the plug in the new one will that be the case?

Follow the instructions in this article to transfer your info: iPhone: Transferring information from your current iPhone to a new iPhone

How can i get the data from database & add them as a link

Hi,
how can i get a data from a database(DB2) and that data will be having a file so i should make them as a link.i tried it in jsp .
<%
Class.forName("COM.ibm.db2.jdbc.app.DB2Driver");
Class.forName("COM.ibm.db2.jdbc.net.DB2Driver");
response.setContentType("text/html");
Connection conn = null;
conn = DriverManager.getConnection("jdbc:db2:spintran");
Statement stmt = conn.createStatement();
stmt.executeQuery("set current schema tut");
ResultSet rs = stmt.executeQuery("select * from tutorial");
%>
Type Of the Category : &nbsp&nbsp&nbsp
<%
     while (rs.next())
     String desc = rs.getString(1);
     out.println(desc);
%>
     <A HREF = "<%=desc%>"><%=desc%> </A>
     <%
     %>
but it is not working.how can i link.
thank you.

what is desc? is it the file name ? whats the data type of desc in db? INFILE?
if desc is just the name of the file, then make sure that such a file exists in the proper folder.only then the link works..
that is, if desc is 'a.jpg' then a.jpg should be existing in the same folder as your html is.

How to delete the Hierarchy data from Infoobjects.

How to delete the Hierarchy data from Infoobjects. In my case I had 300 records in the corresponding table of info object.
When i was trying to delete the hierarchy data, I am getting error message. "Some master data not deleted". Can any one tell me to delete all these records by using a program.

Hi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG

How do i rescue my data from a dead iphone 4?

Similar Messages

Maybe you are looking for