How do I resend an invitation to share a calendar after the person initially declined?

I wanted to share a calendar with my wife, and sent her a invitation to share, but then realized I wanted to change the name of calendar beforehand, and asked her to decline the request. After I changed the name and resent the request, iCalendar (on my laptop, and on icloud.com) immediately changes the invite to declined. It would seem that after one decline, the system is thinking the invite is spam or something and is blocking the request from going through.
Is there a way to reset this so that I can send a new request?
Thanks.

Easiest way (after having to deal with this issue myself), is to go back into the event, remove the invitees completely, and save the event.  Then open the event back up, and add the invitees once more, and save the event.  They'll then receive a brand new invite for the same event, with any changes that you've made.

Similar Messages

  • Why when an invitation to share a calendar is accepted does it appear as tentative and not show up in calendar list?

    I've sent an invitation to shar a calendar.  The invitation appeared in receiver's notifications and was accepted. However, the calendar is not appearing on the receiver's calendar list, and when I check my "sharing settings" the address is not checked as received by appears with a question mark to indicate tentative. How is that even possible when the invitation is only decline or accept?  I sent the samereceiver an invitation to a different calendar at the same time.  It was received, accepted and appears on the calendar list with a checked box and so appears on the receiver's calendar.Both calendar invitations were sentfrom the same computer, from the same sender, on the same day to the same receiver.  Both appeared in the receiver's notifications, both were accepted, one successfully and the other not.  Help.  I'm out of ideas.

    personalg33k wrote:
    Sorry if my explanation of the problem was not clear, but the HD's are fine. I have checked them using fsck, disk warrior, TechTool Pro. they are fine. The drives are not showing up at all, and SATA shows "no information" Once in a while SATA will start working again briefly, then just GO AWAY! And the PCI SATA card I installed acts the same way. I am leaving one HD in the logicboard and one in the PCI card and they both go away (not the whole PCI card, just the HD).
    Thanks for the reply.
    OK, since you are also having things go away with the PCI SATA controller, this could be a problem with either (a) PCI-X bridge or (b) the U3 Memory controller, as they are the two things in the chain between the CPU and where you are having the problems.
    Do you have other PCI cards in use? If so, then if you lose contact with them, that would be a clue.
    On the other hand, you seemed to indicate that even when the Tempo lost the HD, you could still see the Tempo in System Profiler? If the Tempo is still shown in profiler, then, we have a real mystery on our hands. Of course, a system log file wouldn't help because you have lost it, unless you are booting from an external FW drive.
    Watson, the game is afoot.

  • How do I add an invite to share calendars from a family member iPhone 5c?

    How do I add an invitation to share calendars to a family member 5c iPhone?

    Hey toothmoverapple,
    I see that you have some questions about sharing a calendar. Here are two articles that will help you achieve this goal:
    iCloud: Calendar sharing overview
    http://support.apple.com/kb/PH2689
    iCloud: Share a calendar with others
    http://support.apple.com/kb/PH2690
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • How do I resend an invite email for one of the user in my Aruba Central account?

    Q: How do I resend an invite email for one of the user in my Aruba Central account?
    A: Aruba Central allows administrator to create multiple user of different access levels to help manage the system.  As new uses are created by administrator, an invitation email is sent to the user's email address to activate the account. 
    In certain situations, these emails get into spam or junk folders with no visibility to end-user. These are cases, where re-sending an invitation email is of much helpful.
    Follow these steps to resend invite email to a specific user:
    Login to Aruba Central and click on "All Groups"
    In the left-menu, click on "Maintenance" and then "User Management"
    Clik on "Resend Invite email" and mention the email address you wanted to send the invite again:

    By default, the Menu Type option for menus is set to Top Level Pages. You can change this behavior by choosing Menu Type > All Pages from the menu options. The steps to do this are described in Adding a Horizontal Menu widget

  • When I accept an email invite from a client and want to save it to a Google calendar, it saves for 30 seconds and disappears. Does anyone know how to save a invite to a Google calendar in the Mac Calendar app?

    When I accept an email invite from a client and want to save it to a Google calendar, it saves for 30 seconds and disappears. Does anyone know how to save a invite to a Google calendar in the Mac Calendar app?

    When I accept an email invite from a client and want to save it to a Google calendar, it saves for 30 seconds and disappears. Does anyone know how to save a invite to a Google calendar in the Mac Calendar app?

  • How do i get my calendar, which is on my ipad, onto my iphone? I lost my calendar after the upgrade today.

    How do I get my calendar, which is on my ipad, onto my iphone?  I lost my iphone calendar after the upgrade this morning.

    I have iCloud set on my iphone, ipad and mac. But, for some reason, my mac has no calendar and now neither does my iphone.  Fortunately my ipad has my calendar - but I must get that back on my iphone.  I haven't synced by ipad to anything manually - but I assume icloud should have everything.  When I added an appt on my iphone calendar - it immediately duplicated on my ipad.

  • How do I set up security on my linksys router after the i...

    How do I set up security on my linksys router after the install of a net gear wireless pc adapter?

    Setting up your wireless connection in your router.
    1.Open Internet Explorer and type 192.168.1.1 into the address bar.
    2.You will now get a sign-in box, User Name = (Leave Blank)
                                                           Password = admin (all lower case letters)
    3.Once the set-up page opens, click on the Wireless Tab as youwill need to change the settings. A) Wireless Network Mode = Mixed
                  B) Wireless Network Name (SSID) = Choose any name and do not use Linksys.
                  C) Wireless Channel = 1, 6 or 11 is best, so see which work best for you.
                  D) Wireless SSID Broadcast = Enabled.
    4. Now go to the bottom of the page and click on save settings.
    5. Click on the Wireless Security Sub tab.
                  A) Security Mode: WPA
                  B) WPA Algorithms: TKIP + AES
                  C) WPA Shared Key:  Type 24 letters, and numbers using lower and upper case letters
                  D) Group Key Renewal: 3600
    6. Once again go to the bottom of the page and click on Save Settings.
    7. Now you can close out of this page.
    8. You will now need to enter the security info into your computer. I will now give you 2 links, depending which operating system you have, Vista or XP you will follow the one you have.
    Vista = http://www.home-network-help.com/wireless-adapter-configuration-in-vista.html
    XP = http://www.home-network-help.com/wireless-adapter.html
    Now try to make a wireless connection.
    Good Luck,
    Ttech

  • How come I can't customize ringtones on my iphone4 after the upgrade of the latest itune?

    How come I can't customize ringtone on my iphone4 after the upgrade of itunes latest version? I seem to be putting it in the right section and is showing up under my device but is not showing up on my iphone. Can anyone help? And yes, my ringtone are 30sec or less but it doesn'e show up on my phone in the ringtone section.

    Is ringtones under 35 secs? If over then it will not work.

  • How do you shadow a phone and is it possible for the person your shadowing to be able to tell?

    How do you shadow your phone and is it possible for the person you are shadowing to tell?

    Shadow? Are you referring to tracking the phone? If it is your phone, how are you tracking it? Are you talking about a stolen device?

  • How do I get very short movies to play one after the other?

    How do I get very short movies to play one after the other?
    I have some video tutorials to show me how to use software on the Mac.
    When a short 4 min. video is finished - I have to double click the next one.
    There must be a way to have continuous playing of movies back to back...
    I've looked - I am sure it's obvious...
    Help please.  Thanks!

    make them type 'Music Video', and add info on artist to group them, then play them.

  • Can I import a Share Point calendar into the calendar on my iPhone?

    Can I import a Share Point calendar into the calendar on my iPhone?

    I just tried exporting the existing cloud calendar - which confusingly we've called "Family" and it's been in place for the last 4 years! - and then re-importing it and seeing if it will let me import to an existing calendar rather than make a new one. It worked for a few seconds (I told it to import in to the new "Family" calendar set up through Family Sharing). They all showed up alright - effectively duplicating all family events - but then I had thousands of error messages telling me the event already existed on the server and the only thing I could do was 'Revert to Server' - which deleted them all again. (It let me choose "Ignore" to start with but when the thousands of events clocked over to the first one again I knew I was on a hiding to nothing!).
    Going to try doing it about-face and deleting all trace of the original "Family" calendar first this time, (OK to do now that it's been exported)... stand by . . .
    ~/b

  • TS3999 how can I stop syncing my outlook calendar with icloud and not loose the existing calandar data in outlook?  the calendar data which downloads to outlook, was also wiped off the gmail calendar after the icloud sync , how can I restore the data to g

    How can I stop syncing my outlook calendar with iCloud and not lose the existing calendar data in outlook?  The calendar data which downloads to Outlook was also wiped off the Gmail calendar after the iCloud sync, how can I restore the data to Gmail?

    same issue, looks like nobody answered you from last JULY....

  • How do I download Mountain Lion onto my other iMac, after the initial install?

    I am wondering how to download Mountain Lion onto my second iMac, after the initial install.  I understand the purchase is for multiple computers, but I have completed the install on my first iMac.

    Once you’ve purchased Mountain Lion, find the installer on your Mac. It’s called Install OS X Mountain Lion.app and it should have been downloaded to your main Applications folder (/Applications).
    Right-click (or Control+click) the installer, and choose Show Package Contents from the resulting contextual menu.
    In the folder that appears, open Contents, then open Shared Support; you’ll see a disk image file called InstallESD.dmg.
    Launch Disk Utility.
    Drag the InstallESD.dmg disk image into the bottom (empty area) of Disk Utility’s sidebar (on the left).
    In Disk Utility, select InstallESD.dmg in the sidebar, and then click the Open button in the toolbar to mount the disk image’s volume in the Finder. The mounted volume is called Mac OS X Install ESD, and it also appears below InstallESD.dmg in Disk Utility.
    Select Mac OS X Install ESD in Disk Utility’s sidebar, then click the Restore button in the main part of the window.
    Drag the Mac OS X Install ESD icon into the Source field on the right (if it isn’t already there).
    Connect to your Mac the properly formatted hard drive or flash drive you want to use for your bootable Mountain Lion installer.
    In Disk Utility, find this destination drive in the left-hand sidebar and then drag it into the Destination field on the right. (If the destination drive has multiple partitions, just drag the partition you want to use as your bootable installer volume.) Warning: The next step will erase the destination drive or partition, so make sure it doesn’t contain any valuable data.
    Click Restore, and then Erase in the dialog box that appears; if prompted, enter an admin-level username and password.
    How to make a bootable Mountain Lion install drive
    https://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_in stall_drive.html

  • How can I fix my connection to Safari and email after the latest update to iOS7 on my iPhone and iPad?

    I can't connect to the internet on Safari or read my email after the latest update to iOS 7.0.2, is there a new fix coming or is there someting I can do beyond restarting my iPad and iPhone?

    azwanelias wrote:
    my iphone 5s is jammed after downloading IOS 8.0.2 and now i cant use my iphone and it has the sing of itubes in RED which is wired how can i get my phone to work? and its not letting me restore on itunes of my PC
    I don't really understand your comment about "sing of tubes in RED which is wired". But if you are referring to the display of iTunes and the USB port that is an indication that you must restore your iPhone by connecting it to your computer via USB and then using iTunes on the computer to restore it.

  • Why am I seeing iCal invites to other peoples calendars after updating to Mavericks?

    After my upgrade to Mavericks, using iCal 7, I am now seeing many invites that are to calendars I subscribe to (i.e. not my calendars) - even though these calendars are just being shared as "Public" and not ones that I should be able to edit.
    Note: Clicking on Accept, etc on these invites does not accept the invite in other people's calendars.

    After many months of talking with Apple Support, their engineers and multiple periods of the issue being escalated, Apple have now practically given up saying it's a bug (nice). There may be a clue where Calendar users who do not use an iCloud.com email address for their Apple ID may be initiating the error. With multiple users like this, it propagates through my Calendar into many invites to events that are nothing to do with me in the drop-down box from the top-left of the app (even though I get the correct number showing up next to my calendar title in the left-hand list).
    Phhh... Exchange Server here I come, unless the next OSX fixes it (as it was all fine before Mavericks)

Maybe you are looking for

  • Why does my all-day events disappear off iCal after Mountain Lion upgrade

    After upgrading to mountin lion, I can no longer see any all-day events on my imac. They are still visible on my iphone. If they are entered on my imac, as soon as I check the box for all-day event, the entry disappears from the calendar. Any ideas?

  • Mac Mini doesn't see PC connected via AirPort

    I created a wireless network using the AirPort built into the Mac Mini. My PC laptop connects to this network, but I can't find the PC or any of its components from the Mac. I am new to AirPort so maybe I don't know where to look. However, it seems t

  • Registering iLife '80 on Apple web site

    I'm trying to register iLife '08 Family Pack on the Apple web site. During the last step is required the code of the product... while in iWork '08 there is a card in the package with the serial number, for iLife I didn't find any serial. I tryied to

  • Message Type in RBDMIOC

    Hi, I have created customized message type for idoc type MATMAS05. I have activated change pointer in BD61. I have also activated change pointer for message type in BD50. And have made entry BD52. And I made changes to existing material. I checked in

  • Missing In Actions!!!!!!!

    When I click the + icon inthe actions tab (MX 2004), Nothing happens. I cant get any actions to select from in the norman pull down. Anyone know why this is?