How do i reset admin password. no disc but system automativally logs me in as administrator and can access root user mode
I recenly got this macbook, MA&00LL/A, max OS X, V:10.4.11, 2GHz IntelCore 2 duo, 2GHz, When I power up it automatically logs me on as administrator but prompts for password when I try to access/change certain features. I got the macbook from my cousin who has forgot password and has lost disc. I can access root user mode but as iam unfamiliar with apple I am hesitant to delete anything without making things worse. Is their anyway I can reset this admin password without the disc or simply delete this user and reconfigure system as myself as administrator. step by step instructions would be appreciated at this stage till i familiarize myself more. Any help would be greatly appreciated. If it came down to buying a disc, how much roughly do these cost??? thanks again
If you don't have your install disks you can get the 10.4 gray disks by calling Apple Store Customer Service at 1-800-676-2775 They can send them to you for about $16 per disk plus S & H. Just give them your serial number and they'll know which ones you need.
To find your serial number go to the Apple in the upper left corner and select About This Mac, then click on More Info, the System Profiler will then come up. The Serial Number (System) is down near the bottom of the Hardware Overview list.
If you don't have your install disc handy,then follow these steps
1. Start up in single-user mode (hold Command-S as thecomputer starts up).
2. Type: mount -uw /
3. Press Return.
4. Type this: passwd (user's short name) Replace "(user's shortname)" with the short name of the user account whose password you wish to reset. If you are not sure what the account name is, you can get a list of usernames by typing: ls /Users
5. Press Return.
6. Enter a new user password.
7. Press Return.
8. Type: reboot
9. Press Return.
Similar Messages
-
How do you reset Admin password (when not logged in as Admin)??
Here's my predicament. I set up 3 accounts on our laptop - one for me and my wife (Standard accounts) and a House Account as the only Admin. Now, I don't remember the password for the House Account, which serves as the Admin.
I am trying to load new software, but it request administrative privileges. To make matters worse, when I try to install the MAC OSX startup disk (like the help manual says you should to reset the admin password), before my computer will restart the startup disk, it asks me for the Admin password. Because I am not logged in as the Admin, I can't even restart the computer when prompted by the startup and install the OS again.
Any suggestions or help with this issue?
EricDid you create an Open Firmware password as well? If not then just insert the OS X Installer Disc into the optical drive and restart the computer. After the chime press and hold down the 'C' key until the spinning gear appears below the dark gray Apple logo.
-
I changed my password a few days ago, and now I cannot remember it. My disk has the same new password, so i cannot use the disk. Help?
I am trying to find a way without having to reboot it. thanks! If I really need to reboot it, i will, but until then, I want to find a way that does not require the disk or rebooting.OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse pointer to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”. -
How do i reset admin password without cd
I GOT MY MACBK FROM MY AUNT, SHE NEVER TOLD ME ADMINPASSWD ANY1 KNOW WHAT 2 DO?
Resetting or changing an account password:
For Snow Leopard or ealier: http://support.apple.com/kb/HT1274
For Lion or later: http://support.apple.com/kb/HT6022 -
I am trying to access a forum for which you need a username and password but it keeps telling me the username/password i've entered are incorrect. Bizarrely, when I enter the same username/password combination on my iPad, it grants access without any problem.
What could be causing this, is it an issue with cookies, caches or similar. How can I resolve it? The forum administrator is at a loss as to what the problem is.Try the following steps in Safari to see if they help:
1) First try clearing the Safari cache. To do this pull down the Safari menu and select 'Empty cache...', then try logging into the site again.
2) If the issue continues then reset Safari by pulling down the Safari menu and select'Reset Safari...'. You will be presented with a list of items that can be reset. I suggest selecting the 'Reset saved names and passwords', and 'Remove all website data' options at a minimum.
Here is a list of the options and what they do. I pulled it from the Safari help page.
Clear history:
Clears the list of webpages you viewed.
Reset Top Sites:
Clears any changes you made to Top Sites, such as adding or pinning sites. If you also clear your history, your Top Sites page reverts to showing the webpage previews displayed when you first installed Safari.
Remove all webpage preview images:
Clears any thumbnail images Safari saved of webpages you viewed.
Clear the Downloads window:
Clears the list of files you downloaded from websites. Only the names are removed; the files themselves are still on your disk until you remove them.
Remove all website icons:
Removes website icons, which are small graphics that help identify sites on the Internet. You see them in the Safari address field and bookmarks list, and other places. These icons are stored on your computer.
Remove saved names and passwords:
Removes user names and passwords that Safari automatically fills in at websites that require them (if the AutoFill feature is turned on).
Remove other AutoFill form text:
Removes some personal information, such as telephone numbers, that Safari uses to automatically fill in forms on webpages (if the AutoFill feature is turned on). Removing AutoFill information does not remove information from your address book.
Close all Safari windows:
If you don’t close all Safari windows, someone could use the Back and Forward buttons to view the webpages you visited.
Reset all location warnings:
Clears any information websites saved about your location.
Remove all website data:
Removes cookies, tracking information, and other data that websites stored on your computer. -
Lost GlassFish admin password# how to reset admin password
Hi
i lost admin password in glassfish( GlassFish Server Open Source Edition 3.1.1 (build 12) ) application server
key-file stored in glassfish-3.1.1\glassfish\domains\domain1\config\admin-keyfile
how i can reset admin password?Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see:
Reset a Mac OS X 10.7 Lion Password
OS X Mountain Lion- Reset a login password,
OS X Mavericks- Solve password problems,
OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
Mac OS X 10.6- If you forget your administrator password,
OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
How to reset your Mac OS X password without an installer disc | MacYourself
Reset OS X Password Without an OS X CD — Tech News and Analysis
How To Create A New Administrator Account - Hack Mac -
How to reset admin password iMac
I changed my IMac admin password and have now forgotten in and can't find my originàl discs to reset it. I understand you can reset it using apple ID but I can't work it out. Can someone help me
Forgot Your Account Password
For Snow Leopard and earlier
Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and
OS X Lion- Apple ID can be used to reset your user account password.
If you are unable to boot from an installer DVD:
(these will only work on Leopard or earlier)
1. Boot to Safe Mode by restarting and after the chime press and hold down
the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each
command line:
/sbin/fsck -yf
If you do not receive a "Filesystem OK" message then repeat this command
until you do. If after seven tries you still do not receive a "Filesystem OK"
message, then the system is corrupted and needs to be reinstalled.
mount -uw /
cd /private/var/db/netinfo
mv local.nidb local.old
rm ../.AppleSetupDone
shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
Reset Admin Password Using The Terminal
You can reset the password by printing out (or writing down) and carefully following these steps.
First, find the short name of the admin user on the machine. The easiest way of doing this is by looking at what the directory is called in the Users folder.
Now, start in Single-user Mode. It should boot into a command line.
Enter these exact lines. Press RETURN after each.
mount -uw /
ifconfig lo0 up
cd /var/db/netinfo
netinfod -s local
Now you'll need that short name. Enter "passwd", a space, and the short name of the admin. For example, if the admin was rather prosaically called "imadmin", you would enter "passwd imadmin".
The computer will now prompt you to change the password for "lmadmin" (or whatever the short name was). Go ahead and enter a new password.
Now, enter:
sync
reboot
and the machine will reboot. The admin password should now be changed. -
I recently inherited a power mac from my dad how do i change admin passwords and such so I can use it?
And if you can't log into the machine at all, you'll need:
Mac OS X: Changing or resetting an account password.
You'll need a system recovery or Mac OS X install disc. Don't drop your Dad's user account, though. If he's got any serialized software, it may not function for all users on the machine, and you may need to go back to his account. -
Reset admin password in Weblogic 9.2
How do I reset the admin password in Weblogic 9.2?
I attempted to create a new user with the following:
java weblogic.security.utils.AdminAccount adminuser weblogic .
and renaming the boot.properties file, but the server does not start. I get the following error (after starting weblogic and entering in the newly created username/password):
<Jan 12, 2009 5:51:08 PM MST> <Critical> <WebLogicServer> <BEA-000386> <Server s
ubsystem failed. Reason: weblogic.security.SecurityInitializationException: Auth
entication for user adminuser denied
weblogic.security.SecurityInitializationException: Authentication for user admin user denied
I feel that I am missing something obvious to reset the admin password. Any help is appreciatedThis is a very useful thread and definitely works. The above Python code is proper, only that Python requires indentation, and would not work otherwise.
The reason everyone seems to be having problems running this code is because the intentation is missing. See my modified code below. I have put in </tab> to indicate there indentation should be. Simply replace </tab> with an actual tab using Notepad++, Textpad or a similar text editor. I have also made a little modification as I could not get the username and password to display correctly with the above code. The code has complex path processing in function processBootFiles(rootPath, processFunc) which perhaps misses out on the main boot.properties file, even though its coded in.
The key is in getting this function to run explicitely: processFunc("./boot.properties"). Please check the paths for your wlst.sh/.cmd installation and ensure that you are currently in the directory with boot.properties file and run a command to call wlst & this script (call it wlsdecrypt.py) from that directory. This will work and indeed display the username & password :-)
<code>
#=============================================================================
# Jython Script for displaying de-crypted WebLogic boot.properties files
# To run, change to a WebLogic domain directory and execute:
# > /opt/weblogic/wlsadm/weblogic92/common/bin/wlst.sh ~/home/chordadm/wlsdecrypt.py (Unix)
# OR
# > C:\\bea\\weblogic92\\common\\bin\\wlst.cmd C:\\myscripts\\wlsdecrypt.py (Windows)
# Add parameter '-?' to the end of the command line to display more help
#=============================================================================
import os
from java.io import FileInputStream
from java.util import Properties
from weblogic.management import EncryptionHelper
from weblogic.security.service import SecurityManager
from weblogic.security.subject import SubjectManager
#=============================================================================
# Main
#=============================================================================
def main():
</tab>for arg in sys.argv:
</tab></tab>if arg.count(arg.strip()):
</tab></tab></tab>printUsageAndExit()
</tab>saltFilePath=os.path.join('security', 'SerializedSystemIni.dat')
</tab>if not os.path.exists(saltFilePath):
</tab></tab>print "Error: The script must be run from a WebLogic domain direcotry or a directory containing '%s'" % saltFilePath
</tab></tab>printUsageAndExit()
</tab>try:
</tab></tab>open(saltFilePath, 'r').close()
</tab>except IOError:
</tab></tab>print "Error: The file '%s' is not readable - check file permissions" % saltFilePath
</tab></tab>printUsageAndExit()
</tab>processBootFiles(os.curdir, descryptPropsFile)
#=============================================================================
# Decrypt (Note, to encrypt just use: EncryptionHelper.encrypt(text))
#=============================================================================
def decrypt(text):
</tab>getKernelIdMethod = SecurityManager.getDeclaredMethod('getKernelIdentity', None)
</tab>getKernelIdMethod.accessible=1
</tab>return EncryptionHelper.decrypt(text, getKernelIdMethod.invoke(SecurityManager, None))
#=============================================================================
# Process Boot Files
#=============================================================================
def processBootFiles(rootPath, processFunc):
</tab>if not os.path.isdir(rootPath):
</tab></tab>return
</tab>fileNames = os.listdir(rootPath)
</tab>for fileName in fileNames:
</tab></tab>path = os.path.join(rootPath, fileName)
</tab>if os.path.isfile(path):
</tab></tab>if fileName == 'boot.properties':
</tab></tab></tab>processFunc(path)
</tab></tab>elif os.path.isdir(path):
</tab></tab></tab>processBootFiles(path, processFunc)
</tab>processFunc("./boot.properties")
#=============================================================================
# Decrypt Props File
#=============================================================================
def descryptPropsFile(filepath):
</tab>print
</tab>print '----- Decrypting %s -----' % filepath
</tab>try:
</tab></tab>properties = Properties()
</tab></tab>file = FileInputStream(filepath)
</tab></tab>properties.load(file)
</tab></tab>file.close()
</tab></tab>for entry in properties.entrySet():
</tab></tab></tab>print '%s = %s' % (entry.key.strip(), java.lang.String(decrypt(entry.value.strip())))
</tab>except IOError:
</tab></tab>print "Error: Unable to read file '%s' - check file permissions" % filepath
</tab></tab>print
#=============================================================================
# Print Usage And Exit
#=============================================================================
def printUsageAndExit():
</tab>print
</tab>print 'wlsdecrypt.py'
</tab>print '-------------'
</tab>print
</tab>print "Jython Script for displaying de-crypted boot.properties files from a WebLogic domain. Before running the script, change directory to the directory that contains a WebLogic domain (or a directory containing 'security/SerializedSystemIni.dat' and one or more associated 'boot.properties' files). Run this script via WLST or directly via the Java/Jython launch command (the latter option requires both 'jython.jar' and 'weblogic.jar' to be added to the classpath)."
</tab>print
</tab>print 'Example Usage:'
</tab>print
</tab>print '> /opt/weblogic/wlsadm/weblogic92/common/bin/wlst.sh ~/home/chordadm/wlsdecrypt.py (Unix)'
</tab>print
</tab>print '> C:\\bea\\weblogic92\\common\\bin</tab>wlst.cmd C:\\myscripts wlsdecrypt.py (Windows)'
</tab>print
</tab>exit()
# Invoke main and end
main()
</code>
Enjoy,
Swapnil Kashyap -
How do a reset my password on my iMac
How do I reset my password when I forgot it?
If its your admin password, then reboot into recovery mode: (Holding down Command+'R' as it restarts.
Then when you get to the Mac OS X Utilities, go to 'Utilities' at the top and select 'Terminal'.
When the terminal opens up, type in 'resetpassword'.
It will open up a window where you can reset your admin password. Then just reboot and you'll be good to go. -
Resetting admin password. Please help!!
My friend has a G4 ibook with mac osx 10.3.8 installed, unfortunately he has forgotten his password and this prevents him from installing any software now. I have read the support pages from apple which state i should use the installation disc of the original mac os x. This has unfortunately been lost. I have tried with a newer installation disc "tiger" and this does not work. Can anyone help me.
ThanksAlan....try the following.....
Reset Admin Password ..... using Terminal
1. Type.... passw < return>
2. It'll prompt for the...... “old password” <return>
3. Type..... “new password” <return>
4. Retype ...... “password” <return>
Changing the password in this way has the same effect as changing through "System Preferences".
Reset Admin Password .... using Single User Mode
Hold down (command+S) at startup, you will be presented with a black screen containing a bunch of code... this is called....... Single-User Mode
Type.....
sudo passwd username <return> ... or ...
/usr/bin/passwd username <return>
Type your already existing ..... “old password” <return>
Type in a new...... “password” and verify
Type... reboot <return>
george -
Resetting admin password from non-original CD
We have a 400 Mhz Powerbook G3 running Mac OS X 10.3.3. We got it from eBay as is––no CD's, no other information. Now that I have inadvertently locked System Preferences, that is a problem because we do not know the admin password.
I see that you can reset the password by booting up from a Mac OS install disc. My question is, would it be possible to do that using the OS X install disc for v. 10.3.7 that came with my iBook G4?Usually the OEM install disc that comes with a particular computer model will not work with other models. However, you can give it a try. If you can get it to boot the Powerbook, then after the installer loads select Reset Admin Password from the File menu.
-
How to recover BIOS Admin password on HP ProBook 4740s?
Excuse me, do you know how to recover BIOS Admin password on HP ProBook 4740s?
My support period already over. But I don't no BIOS Admin password on my notebook...
Thank you.
This question was solved.
View Solution.Hi,
Unfortunately, business machines such as Probooks or Elitebooks have more stringent security than consumer models - they don't produce 'halt codes', the password cannot be derived from the Serial No. and the code is stored in non-volatile memory so removing the RTC cell will not reset the password in this case.
If you Contact HP Business support they should be able to send you a customised SMC.bin file which you can use at boot to reset the password.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
How do I reset the password for a imac model #fc812ll/a if I don't know the original administrative account information?
You are posting in the 'server' forum.. is this a machine running the 'Server' app ?
Its fairly easy to reset the original admin account..
This is probably a good place for you to start
http://support.apple.com/kb/HT1274 -
How do I reset the password that allows me to download reader.. I worked with chat help two hours last night - we have reset a password that lets me into my adobe account but in the download reader process that password will not work - where it says Adobe reader wants to change something and please type in password, just vibrates with the dots glowing purple but will not open…. what do I do to reset that password or get it to function. they would not assist me further they said its a free download and I would need to seek help from forums ( all this is new to me )
so "forums" help…what do I do ?
thank you
PLpatricia here again:
I am the system administrator - personal computer
I have been able with your lead to find the password I need , and to have install happen
however - when I then go to the website to download the Pdf document I need I get a screen with the big red adobe icon that says to complete and down load this document I must launch adobe reader a dn sign the terms of agreement , close browser and reopen.
but thatscren has no choice buttons whatsoever, I cannot find anywhere a adobe reader image to launch - been into launch pad , preferences etc.
so now the loop is the pdf document and the adobe screen saying I must do terms of agreement
like is this Kafka like or what ...
suggestions?
thanks
P.
Maybe you are looking for
-
Checking for a value in a field within a subform before allowing a user to add a new Instance
Form setup: Page name = Page1 1st Subform within Page1 = Info (set to flowed) Objects within Info subform: Name (textfield) and Email (textfield) I also have a 2nd subform within Page 1 which contains an add instance button What I'm trying to do: 1.
-
I have gone to the genius bar to have my macbook fixed because it wont boot up and i need to have my data recovered and the software wiped and reinstalled. the genius bar guy who helped me said that he cant retrieve my data and he suggested that i ta
-
Hello, The built-in iSight camera stopped working for Skype and Camera booth giving each screen the same horizontal lines. Is this a software or hardware problem. What insight and advicecan you give me. I would be greatful. Thanks Georges
-
Does 10.6.8 have a lock screen feature?
My screen locks when two apps are open at the same time, is this a feature? Can I turn it off? The two apps are apples' own music software Logic pro and a third party app called EastWest Symphonic Coirs, when Logic is open and I call up the choir to
-
Simple question - how do i deploy SQLJ on OC4J version 1.0.2.2.1?
I'm trying to get info on this question but it only seams to appear on JSP. I need to work with servelts and not JSP. Thanks for any help Paulo Gomes