How do I reset airport extreme A1408 to use on different network after buying new Extreme?

I have just bought and set up new Airport ExtremeA1521 and want to take my old one and set up at son's.  It is A1408.  Will doing a reset do all I need to do?  And then I want to hook up an Express to it to extend his network.
Thanks.

Power up the old AirPort Extreme for a minute or two, then hold in the reset button on the device for 8-10 seconds and release. Allow a full minute for the AirPort Extreme to restart back to a slow, blinking amber light status.
The network settings on the AirPort Extreme are now reset back to factory defaults, and you can now set up the AirPort Extreme to create a new network with a network name and password of your choice.
Then, the Express can be set up to extend the network. If you have a new Express, it will already be set to factory defaults, so all that is needed is that device be set up to connect to the AirPort Extreme.  If the Express has been previously set up, then it will first need to be reset back to factory default settings, before it can be set up again to extend the AirPort Extreme network.

Similar Messages

  • How do I reset Airport Extreme Model A1034?

    How do I reset Airport Extreme Model A1034?
    I am using a MacBook Pro to set up the airport, but, I get this message:
    "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information."

    You would download and install AirPort Utility on the PC.
    For Windows 7 and above.....use AirPort Utility 5.6.1 for Windows - Support - Apple
    For XP SP3 and Vista SP2......use AirPort Utility 5.5.3 for Windows - Support - Apple
    For XP SP2 and Vista SP1......use AirPort Utility 5.4.2 for Windows - Support - Apple

  • How to use two different network cards on RT?

    Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
    So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
    For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
    Thanks for your help!
    Solved!
    Go to Solution.

    Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
    As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
    Thanks

  • How do I reset Airport extreme via that wee pinhole

    I once reset my Airport Extreme via the pinhle on the back (Courtesy of Bob Timmons instructions). I cannot remember the details of how to do it. Any help?

    Welcome back!
    I assume that you want to wipe out the current settings and get back to a "start over" condition, correct?
    With the AirPort Extreme powered on, hold in the reset button on the back of the device for 10-12 seconds and then release.
    The AirPort Extreme will restart as solid amber, then after 20-25 seconds it will slowly blink amber. That is your signal that the device has been reset.

  • How do I reset the e-printer's web embedded server network password?

    I have an HP Photosmart 7520 e-all in one. I use Windows 7.  I could tried to set a password in the EWS network tab. I could not change the user name so it remains "admin". I set the passwork and it seemed ok. But when I tried to log on again, it would not let me in. How do I reset the network password?

    I recommend that you run "Restore Network Defaults" from the front panel and then run the wireless setup wizard again.  This will wipe out all your network settings.
    SandyBob
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP
    1-800-474-6836

  • Airport Extreme and Mac Mini on different networks

    Hello ALL,
    I am creatng a Mac Mini server. I have the Mac Mini connected via ethernet to my new Airport Extreme. I read somewhere that for server purposes, I should wire the mac mini versus using the wireless connection.  My Extreme is bridged with the Uverse 2wire modem and I have wifi disabled on it.  The problem I have s my ipad and iphones are all on the wireless network created . I use remote apps for the mac mini. As of now the remote apps do not recognze the mac mini becuse its connected via ethernet.  Any solutions for ths? Can i turn on Ethernet and Wireless at the same time?    THANKS!!

    My Extreme is bridged with the Uverse 2wire modem and I have wifi disabled on it.
    The it on the end of the sentence could equally refer to the Extreme or the 2wire.
    I think you mean the Extreme.
    Can i turn on Ethernet and Wireless at the same time?
    The context suggests you are talking about the mac mini but you could equally well refer to the Extreme.
    Do not mix up domains.. I think this is what the problem is. If you have wireless on the 2wire and the idevices are getting IP from the 2wire, they are also getting a domain.
    Mavericks is very sensitive to domain. The domain by default on the AE is local .. but the domain on the 2wire could well be your ISP.
    I would recommend you turn wireless on .. on the Airport Extreme.. not on the Mini. And see if the idevices when connected to the same domain can then also connect to the mini.
    Tell me your results.
    A netstat scan is a great tool to use in the Mac.. open the network utility and see what you get for domains. See if the phone etc are on a wrong domain.

  • How do I add songs to my iphone using a different computer?

    The original computer I used to import songs onto my iphone has crashed.  I now have a new computer that I am using.  I can add songs to the itunes library and update my iphone, however my iphone will not import any songs from the computer.  How can this be fixed now that this is my only way of adding new music?  Could my old computer being windows vista and my new computer being windows 7 have anything to do with it? help!

    you don't
    Iphone will sync with one and only one computer.  Syncing to another will erase the current content. This is the design of the iphone.

  • How can I reset AirPort password?

    Trying to access WiFi receive message "The network "2WIRE932" requires a WEP password." Entering password get "Invalid password"  Thanks

    Please follow the instructions for a Soft Reset in this Apple support document:
    Resetting an AirPort Base Station or Time Capsule FAQ

  • How do i reset airport password?

    i forgot my airport express password so i cannot join my ipad to my own network. what do i do??

    Hi Andrea85
    Well if you checked off the a box in Airport during setup of Airport your password should be in the keychain in your Utilities folder in the Application folder. See if you can find it and get back either way.

  • Reset airport express for each use.

    I use the AE both for home to stream music, at the office to extend a network and while traveling to create wireless network in hotel rooms. Each time I have to reset the base station and basically start over. I use Leopard at home and Vista at work and travel. Is there something I can do to not have to go through the whole setup process each time? Thanks.

    phunk wrote:
    I use the AE both for home to stream music, at the office to extend a network and while traveling to create wireless network in hotel rooms. Each time I have to reset the base station and basically start over. I use Leopard at home and Vista at work and travel. Is there something I can do to not have to go through the whole setup process each time?
    I'm not entirely sure what you mean by you "have to reset the base station and basically start over", but you may find useful the ability to your AirPort Express to hold multiple "profiles". In AirPort Utility initiate a manual setup, then pull down the "Base Station" menu and select "Manage Profiles". You can then define a profile for each environment. You'll still have to restart your AirPort Express unit each time you need to switch profiles, but you won't have to re-enter any configuration settings.

  • How can I reset my favoriets in icloud using pc?

    I have duplicate favoriets and I want to reset them.
    i didn't find a way to do it on a PC.
    tried to close iCloud on my pc icloud panel (uncheck favoriets)  and on my idevices, clean explorer favorites and check favoriets on the pc icloud panel aprroving the merge.
    it did't help. any suggestion what else can I do?
    thanks.

    Hello there, amir4.
    The following Knowledge Base article offers up some great information and pointers on how to download your iCloud data (including pictures). Review the section titled "My Photo Stream":
    iCloud: Archiving or making copies of your iCloud data
    http://support.apple.com/kb/HT4910
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How can I reset the xy zero point to a different spot in my PDF? Possibly via a plug-in?

    I would like to reset my zero point to aid in measuring and aligning elements in PDFs. Indesign, Illustrator and Photoshop will let you do this but not Acrobat Pro. Any ideas? I also use Pitstop Pro but can't seem to find anything in there that can help other than the measure tool.

    You can't. The coordinate system defining the position of page elements is a fundamental property of the ISO PDF standard.

  • How do I reset the AppleID on a used iPod Touch

    I bought a used iPod but it has the previous user's id on it, so I can't sync with iTunes or Audible & ????
    What do I need to do to set it up as mine?
    Thanks

    Have the previous owner remove the device from their account
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    The restore the iPod via iTunes.
    Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    If yo can't do that return the iPod for a refund. If yo can't do that turn into the police since the device was likely lost or stolen

  • HT1766 my phone locked up to the use of emergency calls how can I reset it so I can use mu password to unlock it?

    My phone locked up to the use of emergency phone numbers only...how can I get it unloacked where I can use my passcode to unlock?

    http://support.apple.com/kb/ht1212

  • How do you reset an iPad that is using an apple id that is no longer working, i changed my id and never logged out of it on my iPad before the change

    so i changed my apple id since it was attached to an email i don't use and forgot to log out of my iPad before doing so. i don't use it often so this was probably two months ago and now i notice the old apple id that always will come up invalid user name or password but can't change the actual id to the correct one so have no idea what to do next

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  When you do this you may find that the password for your old ID isn't accepted.  If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Maybe you are looking for