How Do I Reset Indicators in User Interface?

I have a VI that has got out of control. I have created several test sequences that were developed, proven and built into individual VIs. I created a Main VI and placed (cut and paste) each invidual test VI into a sequencial Frame. Long story short; The main screen looks good, but the test values and status indicators do not reset everytime the test is initiated (there is no loop).
Question- How do I reset each of my indicators on my user interface when the test completes?
Thanks in advance,
Rick Horwitz

Try the following: Got to "VI properties...execution". Now place a checkmark for "Clear indicators when called". That might be enough.
(If you are looking for a programmatic solution create an invoke node in the first or last frame as desired, wire it to a reference to the current VI and select method "renintialize all to defaults".)
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

HT4528 How do I reset my iCloud user name when my email used before is no longer active? Also my iCloud was never verified with my old email on my iPad is I am stuck.

How do I reset my iCloud user name when my email used before is no longer active? Also my iCloud was never verified with my old email on my iPad is I am stuck.

Hey Dorekelly,
Thanks for the question. It sounds like you wish to change the email address associated with your Apple ID and iCloud account. The following resource should guide you through this process:
Change your Apple ID
http://support.apple.com/kb/HT5621
Afterwards, be sure to read about updating the features and services that you use with Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Thanks,
Matt M.

How to create and see the user interface of helloworld sample??

hello friends,
i have deployed the hello world sample
now i want to know how to create and see the user interface of hello world sample.
thanks and regards..

If you go to bpel console host:port/BPELConsole (in a dev install, localhost:9700), click on your process, we will generate, based on the describing wsdl a UI for you ..
hth clemens

How would i do a tabbed user interface ?

Hi everyone,
how would I do a tabbed user interface ?
example
| tab 1 | tab 2 | tab 3 | tab 4 |
description of tab 1
when the person clicks on tab 1 they would see the appropriate pane for tab 1 , if they click tab 2 the would see the appropriate pane for tab 2 etc
stev

The link shown below contains numerous examples on how to do what you wanted to do:
http://www2.gol.com/users/tame/swing/examples/SwingExamples.html
V.V.

How to cusomize in Flash: components User Interface Button?

Flash Componants> User Interface> Button
How to cusomize components?
The button works, but where is the code that is making it work?

Connect recorded session on workig with flash components https://admin.adobe.acrobat.com/_a295153/p49752948/?launcher=false&fcsContent=true&pbMode= normal
Using the Button component http://www.adobe.com/devnet/flash/quickstart/button_component_as3/
Simple to modify the UI is to double click on the button and modify its skin in different states as per ur requirements

How can I make a flash user interface with buttons to open up and navigate other flash files?

Hello I would like to make a user interface that will serve as a tool to load and unload other flash materials like a slideshow. I would like to make a kind of slideshow with Flash that opens up other flash files which could be around 10-15 slides (frames) long each. I would want to ask if there is any way to make a link between navigation and other slides easily. And if there are ways, what action codes should I use for this. Thank you very much.

All you need to do is load a swf into the main swf and target it with whatever controls you intend. If you are using AS3 then you could use the Loader class to load the swf and then target the Loader.content with your control buttons.

How do i reset the registered user

This is a phone for my wife and it defaulted to my phones info. How do I reset it?

Well, you could maybe start with a fresh new account. But that wont solve your iLife issues.
To be honest, I'd make a new admin account, and trash the old one.

How can I reset my main user from my guest user when I forgot my password for the main user? Please help me!!!

Ok. I know I'm really stupid!
I forgot my main user password and so then allowed someone on my laptop who accidently changed over into the guest user! Now I can't get back into my main user and I was wondering if anybody could either help me reset the password from the guest user or even reboot my laptop so the memory is wiped and I can set up my main user again. Please help me!!!

Forgot Your Account Password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password, OS X Mountain Lion- Reset a login password, and
     OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself

How do i reset the administrative user.

Got a new macbook pro for my son and migrated his user that had parental controles to the new system. Now i can't do anything with the system. Almost everything is locked out. I would normally reinstall the operating system but it didn't come with a disk.

You really shouldn't need to reinstall Lion in a new computer. You can simply migrate what you want from the old computer. Is that essentially what you wish to do? See the following FAQ on the general topic of migration:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
OS X Lion: How to use Migration Assistant to transfer files from another Mac
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

How/where can I submit ipod user interface feedback?

Subject asks the question.
I've had my ipod for a few weeks now and use it every day on my bike commute. There are some things that bug the **** out of me when I try to do pretty simple things while in motion that could probably be pretty easy to solve in the UI. How do I let some one know?
If, by some chance, this is the right place, here's what I'd like to see:
1) An option that would allow you to easily go from the top of a list to the bottom (or back). It sure would make going through long lists easier. If scrolling up from the top of the list brought you to the bottom (and vice versa), that would work.
2) A quick option to bring you back to the last played (or currently playing) song if you've navigated through menus and playlists to something far away. Also useful if a playlist ends and you don't happen to have "repeat" on. alternately:
2a) When a playlist ends, how about if the ipod resets to the playlist choice in the "playlists" menu? Going back to the main menu makes very little sense to me. Hitting play again just starts playing songs from the master list. Really annoying on my bike rides.
3) "On the go" is really cool. It sure would be nice if you could add a song to the list while it's playing instead of navigating back one menu to find the song name.

http://www.apple.com/feedback/ipod.html
Thank you for the link.
You use your iPod while riding a bike on the road?
Do you want to die and not even know it?
Yes, I do. I suppose you want to die and know that it's coming.
Please don't be judgmental.

How to design the user interface for Indesign cs6 plugin ?

Designing user interface using custom c++ library(SDK) for pluging is very tedious work .so when I search the net than i found that we can do it using Adobe Creative Suite Extension Builder but i dont know how to use it to develop user interface for plugin and to how to enable event handling in this UI .I read lots of document regarding this on net but they all created lots of confusion in my mind so can anyone help me to know steps which i must follow to develop plugin using this or whatever technology (action script,java script etc)

If you want to develop Extensions using Creative Suite Extension builder then i think this is not the right forum for you. Please post your specific queries regarding this at the below mentioned link
http://forums.adobe.com/community/creativesuites/cs_sdk
To give a brief of how to develop UI using JS you can use ScriptUI to develop your UI, it is a fast and OS independent approach to UI development. The UI created using JS is native in look. You can refer the following link for some help on ScriptUI
http://www.kahrel.plus.com/indesign/scriptui.html
I don't have much info regarding development in CS SDK, but i can point you to one more direction of dev called as hybrid plugins wherein the UI is created in CS SDK, and appropriate methods are exposed from the C++ plugin(enhancing the script object model) to be called up by the CS code for too and fro communication between these two modules of code.
Hope these pointer help you in getting started.
Thanks,
-Manan

Changing the LSO Content Player user interface

Hello,
Does anyone knows how the changes to the CP user interface can be made?
I found some information on the subject in the SAP Note 805425, but couldnt apply the
modifications.
Can anyone please help?
Regards,
Hubert

Hello,
The note itself doesnt correct any problems. It explains however how to change
the interface but so far I was unable to do so.
Regards,
Hubert

Modify User Interface

Hi.
How could I modify the Admin User Interface, to remove those Tabs which I don't want displayed, whenever the Admin User signs into IDM?
This is the main Admin User Interface :
HOME --- ACCOUNTS --- PASSWORDS ---- WORK ITEMS ---- SERVER TASKS
Where and how can I modify/customize this Interface?
Thanks

I understand that you want to remove tabs, but i don't have working (and tested) code to do this.
I juste give you a working code to add tabs. You can modify it to make a code to remove tabs but you have to work on it and search method name.
code to add subtabs:
p.TASKS_PAGE.addSubPage(MY_PAGE);
code to remove subtabs (probably like this but not tested):
p.TASKS_PAGE.delSubPage(MY_PAGE); or :
p.TASKS_PAGE.removeSubPage(MY_PAGE); or :
p.TASKS_PAGE.deleteSubPage(MY_PAGE); or another...
and to remove tabs (probably like this but not tested):
p.delPage(ACCOUNTS_PAGE); or :
p.deletePage(ACCOUNTS_PAGE); or :
p.removePage(ACCOUNTS_PAGE); or another...
it's juste one lead from a tested and working code which make the the same type of operation.
I hope it will help you...

Learning to write user interface

Dear All,
With zero experience in writing LV user interface, we needs to write a User-Interface program for end-user data entry of "structured command script" (text with specific keyword_command)
Basically, we need to have the LV equivalent of some basic window commands, like
list box for user to select one from several keyword_commands
push button to 'enter' 'save' etc.
radio button to select options (like inch vs. mm)
a graphic plot showing the 'execution' (like the x-y grid inspection (template).vi in the motion find-example)
drop down menu (like File in windows)
Grateful pointers for beginner's learning resources on user interface.
Thanks in advance

Depending on your version, all of these things exist in the LabVIEW palettes, you just have to place them on your front panel. Just look through the different palette, since there aren't many palettes. If you want controls which look like the MS ones, go for the Dialog Controls palette, which uses OS specific controls. The tricky bit is the menu, which can be controlled through code, or from the Edit menu.
After placing all things on your FP, however, the real trick is connecting the code to those things. Here is a standard passage I provide to beginners (although I don't know how much of that applies to user interface):
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with and here are some tutorial videos. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
You can try searching this site for a presentation called "the good, the bad and the ugly", which deals in UI design, but is not a tutorial. You can also try the LAVA forums UI board (I believe they have one), but read what's there instead of bombarding them with questions. Above all, this will have to take your time. You can't write an LV program without learning LV (and that's relatively easy).
Try to take over the world!

How can I improve the response time of the user interface?

I'm after some tips on how to improve the response time to mouse clicks on a VI front panel.
I have data acquistion application which used to run fine, but after spending a couple of weeks making a whole bunch of changes to it I find that the user interface has become a bit sluggish.
My main GUI VI has a while loop running 16 times a second, updating some waveform charts and polling about a dozen buttons on the front panel.
There is sometimes a delay (variable, but up to 2 seconds sometimes) from when I click on a button to when it becomes depressed. I have wired the iteration terminal of the while loop to an indicator on the front panel and can see that the while loop is ticking over during the delayed response to the mouse click, so I know that the problem is not that the whole program is running slow, just the response to mouse clicks.
Also, just for debugging purposes, I have indicators of the iterations of all the main while loops in my program on the front panel, so I can see that there are no loops running abnormally fast either.
One thing I've tried is to turn off multi-threading, and this does seem to work - the response to mouse clicks is much faster. However, it has the side effect of making the main GUI while loop run less evenly. I was trying to get a fairly smooth waveform scrolling across the screen, and when multi-threading is off it gets a bit jerky.
Any other suggestion welcome..
(I am using LabVIEW 7.1, Windows 2000).
Regards,
Mark.

Hi Altenbach,
Thanks for your reply. In answer to your questions:
I am doing both DAQ board and serial data acquisition. I am using NIDAQ traditional for the DAQ board, and VISA for the serial. I have other similar versions of this program that do only DAQ board, or only serial, and these work fine. It was only when I combined them both into the same program that I ran into problems.
The multiple while loops are actually in separate VIs. I have one VI that acquires data from the DAQ card, another VI that acquires data from the serial port, another VI that processes the data and saves to file, and another VI, the GUI VI, that displays the data in graphs and charts. The data is transferred betwen the VIs via LV2 globals.
The GUI VI is a bit more complicated than I first mentioned. It has tab control, with 4 waveform charts on one page, 4 waveform graphs on another page, and 3 waveform graphs on another page. The charts have a history length of 2560, and 16 data points are added 16 times a second. The wavefom graphs are only updated once per minute.
I don't use the value property at all, but I do use lots of property nodes for changing the properties of the graphs and charts e.g. changing plot colours, Y scale range etc. There is only one local variable (for the Tab control). All the graphs and charts have data wired directly to their terminals.
I haven't done any profiling yet.
I am building arrays in uninitialised shift registers, but this is all well under control. As the experiement goes on, more data is collected and stored, and so the memory usage does gradually increase, but only to the extent that I would expect.
The CPU usage is 100%, but I thought this was always the case when using NIDAQ with DAQ cards. Or am I wrong about this? (As a side note, I am using NIDAQ traditional, but would NIDAQmx be better?)
Execution priority of the GUI vi (and all the other VIs for that matter) is set to normal.
The program is a bit large to post here, and I'm not sure if my company would be happy for me to publicise it anyway, so I suspect that this is turning into one of those questions that are going to be impossible to answer.
Just as a more general question, why would turning off multi-threading improve the user interface response?
Thanks,
Mark.

How Do I Reset Indicators in User Interface?

Similar Messages

Maybe you are looking for