How do i reset mac book to original settings

I have an old mac book (white) and want to clean everything off of it and give it away, how do I do that?

     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer.  Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the  "C" key.  Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.)  Click on the Partition tab in the DU main window.  Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer.  Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed Quit the installer. Be sure to include the
         installation discs.

Similar Messages

  • How can i reset my macbook to original settings?

    i am giving my old macbook (2008; running 10.5.8) to my son and am wondering how i can clear out all the information and reset it to factory original.

    Prepare Your Mac for Sale
    Boot from the Leopard Installer Disc.  After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.  After DU loads select the startup volume from the left side list then click on the Erase tab.  Set the format type to Mac OS Extended (Journaled) then click on the Security Options button.  Select the one pass Zero Data option and click on the OK button.  Then click on the Erase button.
    Note: You can skip the Zero Data option if you are not concerned about removing sensitive personal data from the hard drive.  If you choose to skip this part of the process then it is possible for others to recover data from the hard drive.  The Zero Data procedure will prevent others from getting access to your personal information.
    This process will take 30 minutes to several hours depending upon the size of the hard drive.  After formatting has completed quit DU and return to the installer.  Now complete the OS X installation.  At the completion of the installation do not restart the computer.  Instead just shut it off.  The next user will be presented with the Setup Assistant when they turn on the computer just as it would if new out of the box.

  • How do I reset my elements9 to original settings?  My clone stamp is suddenly goofy.

    My cloning stamp is suddenly doing things differently, but I didn't knowingly make any changes, so I'd like to reset the program to its original settings but I don't know how.  Thanks for any help.
    Larry

    Quit the editor, then restart it while holding down ctrl+alt+shift (command+option+shift on a mac). Keep the keys down till you see a window asking if you want to delete the settings file. You do.

  • How do I reset MacBook Pro to original settings for sale?

    I want to reset a slightly used MacBook Pro to original factory settings... plan to resell on eBay.  Thanks!

    Follow these instructions step by step to prepare a Mac for sale:
    Step One - Back up your data:
           A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
           B. Clone to an external drive using using Carbon Copy Cloner.
              1. Open Carbon Copy Cloner.
              2. Select the Source volume from the Select a source drop down menu on the left side.
              3. Select the Destination volume from the Select a destination drop down menu on the right
                  side.
              4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
                  sure to opt for that.
                   Destination means a freshly erased external backup drive. Source means the internal
                   startup drive.
    Step Two - Prepare the machine for the new buyer:
              1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
              2, Remove any Open Firmware passwords or Firmware passwords.
              3. Turn the brightness full up and volume nearly so.
              4. Turn off File Vault, if enabled.
              5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
    Step Three - Install a fresh OS:
         A. Snow Leopard and earlier versions of OS X
              1. Insert the original OS X install CD/DVD that came with your computer.
              2. Restart the computer while holding down the C key to boot from the CD/DVD.
              3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
                  Optionally, click on the Security button and set the Zero Data option to one-pass.
              4. Install OS X.
              5. Upon completion DO NOT restart the computer.
              6. Shutdown the computer.
         B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
             Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                       it is three times faster than wireless.
              1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
                  Utilities window appears.
              2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
              3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
                  on the Erase tab in the DU main window.
              4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
                  and set the Zero Data option to one-pass.
              5. Click on the Erase button and wait until the process has completed.
              6. Quit DU and return to the Mac OS X Utilities window.
              7. Select Reinstall Lion/Mountain Lion and click on the Install button.
              8. Upon completion shutdown the computer.
    *If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

  • I don't know how to go back to the original look of my Dashboard. I don't know what I did, but now when I click on it, my Words with Friends game comes up and that is all. How do I "reset" it to the original things on it?

    I don't know how to go back to the original look of my Dashboard. I don't know what I did, but now when I click on it, my Words with Friends game comes up and that is all. How do I "reset" it to the original things on it?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    You can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

  • Making mac book pro original have more horsepower?

    hello,
    i have a mac book pro original. i have it linked to my hdtv and i have been trying to play 1080p movies with it.
    at first i got through half the movie with no lag at all, and then there started to be some lagging problems where i'd have to close the video and reopen etc.
    i am pretty sure my laptop is a little too slow for the playback i am assuming, and am wondering what are the best requirements for the specs, and what i can do to upgrade it.
    here are my mbp specs currently:
    Model Name: MacBook Pro 15"
    Model Identifier: MacBookPro2,2
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.33 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 2 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP22.00A5.B07
    SMC Version: 1.12f5
    as you can see, i have 2.33 GHz...i heard for 1080p playback its recomended to have 3.0 GHz
    so would i need to upgrade this? or just the ram or just the memory or everything!?...is there a 3GHz chip i can install?
    thanks
    -Mikw

    hello, thanks for the reply.
    thats nice to know that i may not need to upgrade hardware.
    i am currently using VLC player for my movies.
    i thought using this player may have something to do with the lags, but hey, its a free program.
    the video i was playing back in 1080p is a blu-ray file. (m2ts)
    i know their is another blu-ray format (mkv...i think..) although the files i have are m2ts, and i dont know if this kind is more complex or harder for a smoother playback. also, the file sizes are usually around 4gig
    i notice i can play back 1080p trailers from the apple site with quicktime, although i see how it cant playback blu-ray files in quicktime, which is why im using vlc.
    i currently have quicktime pro version 7.5.5 (249.24) by the way.
    i have heard of perian for quicktime, but never looked too much into it. i see its free though!
    i see that it can play mkv, but has many problems doing it in leopard, also i dont see anything about it playing back m2ts?
    yesterday i played a m2ts 1080p movie, and half way through it lagged and i had to restart several times....today, i played the same movie and -didnt skip once!
    i feel like skipping or lagging gets invoked when i pause it alot, or rewind to an earlier section in the movie and play from there...if i just play it straight through, without touching it once, i feel theres a better chance it will avoid lag. this is where my idea of upping the memory came it...maybe 4gig of ram will help with this?
    if its true i don't need to update hardware, im assuming VLC may be what the lag problem is.
    i like quicktime alot more and would download perain if it indeed can play m2ts.
    hopefully its the video players and not the hardware thats the problem!! whats your input?
    thanks so much
    -Mike

  • How do I reset Mac 10x to sell

    How do I reset Mac 10x to sell

    Before you sell or give away your computer, in addition to the steps listed in this support article, take these steps:
    1. Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
    2. Reset the PRAM and the SMC, which might contain personal information.
    3. If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
    4. If you activated FileVault in OS X 10.7 or later, turn it off.
    5. If you use Boot Camp, the partition must be deleted.
    6. If you created any other data partitions on the internal drive, remove them in Disk Utility.
    7. If the machine has an internal hard drive, erase the one remaining data partition with the option to zero out data. An SSD doesn't need to be zeroed.
    You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall an older OS, either from the installation media, if applicable, or by starting up in Internet Recovery mode (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
    If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer to the buyer.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
    The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either. The buyer will have to purchase them.
    Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

  • Any ideas how to fix my mac book pro to canon pixma mp640 printer connection?

    Anyone have any ideas how to fix my mac book pro to canon pimxa mp640 printer link? The two are connected manually yet the ! remains on the 'print' page next to the printer name. it was working fine until i changed the ink cartridges. Without the wireless password - which I've never had and don't supposedly need as it's not a wireless connection, I am being prevented from resuming printing.

    If it's on a windows network you have to enter your (windows) log in (name/password) credentials.
    This should be a 1 time event. It will remember it thereafter.

  • How to update my mac book pro from 10.5.8 to the leatest version

    how to update my mac book pro from 10.5.8 to the leatest version

    Upgrading to Snow Leopard, Lion, or Mountain Lion
    Upgrading to Snow Leopard
    You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
    Before upgrading check that you computer meets the minimum requirements:
    Snow Leopard General requirements
      1. Mac computer with an Intel processor
      2. 1GB of memory
      3. 5GB of available disk space
      4. DVD drive for installation
      5. Some features require a compatible Internet service provider; fees may
          apply.
      6. Some features require Apple’s MobileMe service; fees and terms apply.
    Upgrading to Lion
    First, you need to upgrade to Snow Leopard 10.6.8 as stated above.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
    Before upgrading check that you computer meets the minimum requirements:
    Lion System Requirements
      1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or
          Xeon processor
      2. 2GB of memory
      3. OS X v10.6.6 or later (v10.6.8 recommended)
      4. 7GB of available space
      5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    Be sure your computer meets the minimum requirements:
    Apple - OS X Mountain Lion - Read the technical specifications.
    Macs that can be upgraded to OS X Mountain Lion
      1. iMac (Mid 2007 or newer)
      2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
      3. MacBook Pro (Mid/Late 2007 or newer)
      4. MacBook Air (Late 2008 or newer)
      5. Mac mini (Early 2009 or newer)
      6. Mac Pro (Early 2008 or newer)
      7. Xserve (Early 2009)
    Are my applications compatible?
    See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
    Am I eligible for the free upgrade?
    See Apple - Free OS X Mountain Lion upgrade Program.
    For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.

  • HOW I CONNECT MY MAC BOOK PRO WITH APPLE TV

    hello
    i have a mac book pro and apple tv. but i am not able to connet my mac book with apple tv. so how i conncet my mac book with apple tv.

    You can use AirPlay to mirror what is on your MacBook.  Take a look at this link, http://support.apple.com/kb/HT5209?viewlocale=en_US&locale=en_US

  • How to connect my mac book pro to network printer Canon IR 2010f?

    I'm desperate to know how to connect my Mac book Pro to network printer Canon IR 2010f. This printer has an independent system, therefore, no need a PC to be on, in order to print. But this printer is a network printer. Help me please.

    The Canon UFR2 v2.20 driver for Mac OS X does not list the iR2010F as a supported model. The same is so for the Canon PS driver so I therefore believe this model is PCL5e only.
    What you should do is open Safari and type the IP address of the iR2010F. This will connect to the internal web page of the copier and from the provided pages you should be able to see what printer languages are supported.
    If it only lists PCL then you will be able to print to this copier using the Generic PCL driver included with 10.6.
    So if you open Print & Fax, click + to add and then select IP > LPD for the protocol you can then enter the IP address of the iR2010F and leave the queue name blank. For the name you can change that to iR1020F and for the Print Using, select Generic PCL Laser Printer.
    One note with regards to this driver. It is defaulted to 300dpi so you will need to open the print dialog when you do print and change the resolution to 600dpi to get better print quality.

  • How to connect my MAC Book Pro (2013) to a display?

    how to connect my MAC Book Pro (2013) to a display?

    When you have connected the monitor or the TV to the MBP, open System Preferences>Displays and it should show a category called Arrangement.  These links should give some of the details:
    http://support.apple.com/en-us/HT204154
    http://support.apple.com/en-us/HT202351
    Ciao.

  • How to restore a Mac Book Air to factory

    How to restore a Mac Book Air to factory

    Press Command, Option and R keys on boot, open Disk Utility, erase the disk and reinstall OS X. If the computer came with discs, use the USB SuperDrive or Remote Disc > http://support.apple.com/kb/HT5287

  • How can i connect mac book pro to appel tv3

    How can i connect mac book pro to appel tv3

    To do what?  It's not clear from the question.
    If you want to play iTunes library content on the unit you need to enable Home Sharing on both, have them on the same network and then look for your iTunes library under the Computer icon - iTunes must be running of course.
    Communications can be blocked by firewalls or security software sometimes.
    To factory restore a black AppleTv2 or 3 you connect it to the computer running itunes with a USB to microUSB lead alone and start itunes.
    AC

  • How long should the Mac Book pro hold its charge???

    How long should the Mac Book pro hold a  battery charge??

    For a single use or how long will the battery last until it needs to be replaced?  For single use, it depends on what you are doing when using you mac.  I find that when using mine I get about 6-6 1/2 hours just using it to browse the internet before I need to recharge it.  If it is one of the newer Macbook Pros that claim to have a 7 hour battery life, It can last up to 5 years.  See this article on notebook batteries to get the most out of your battery: http://www.apple.com/batteries/notebooks.html.  Hope this helps

Maybe you are looking for

  • Payment term functionality

    Does SAP have the ability to grant a discount on an invoice, but only if paid within a certain time frame?  I created a payment term with a 2% discount and due date = posting date + 30 days.  I was hoping the invoice would post for $1,000, but that t

  • Printing Cancelled Excise Invoice

    How to print cancelled excise invoice which is cancelled in J1IS & not in J1IH. This is required for record purpose as per excise authorities.

  • Make configuration not changeable in BANF in 4.6c system

    Hi ABAP, once again i stumbled over a masterpiece of SAP standard. In former times SAP didnt allow to change configuration in BANF or pruchase order when those were referenced to a configured order. With release 4.6C they changed this behaviour and m

  • Drag & Drop between 2 ALV

    Hi everyone, is it possible to do drag & drop between 2 ALV (Grid/Tree)? Could some one provide me with a example coding please? Thanks for your help in advance.

  • Crystal Report Server 9 - licenses problem

    I am using ASP with Crystal Report Server 9 in an inhouse web application which provides many online reportings. Here is my problem : when the number of concurrent reporting request increases, the RAS could not respond. Check from IIS log and found t