How do I reset my iPod 5 but it won't turn on and I tried the lock screen and home screen trick but it won't work and plus I don't have a laptop I only have my cosians who live in Scotland
Help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
You need a computer with iTunes and an internet connection for most of the steps.
Similar Messages
-
I ordered my new S5 online and after following the steps outlined in exact order, my old phone no longer works and the S5 will not authenticate. Now I have no phone and I am becoming frustrating.
It downloaded all my contacts, photo's with no problem. I called the number they gave me from my old phone and then turned it off. I then put the sim card in and charged the phone. I followed all the setup steps and no I cannot send any text or make any phone calls. I get a message that they cannot authenticate my phone to dial #8899 but get the same message.Hello Notahappycamper1962
Let's get that S5 up and running! I want you to love the S5! Is the old device powered off? What zip code are you in?
I look forward to hearing from you and getting this addressed.
JoeL_VZW
Follow us on Twitter @VZWSupport -
... seonds and it won't use fans as it usually does. This all happened because i did a clean install while having fans at 3100. Please help me reset my fans!!!
OK....you were using SMCfancontrol?....and you reinstalled the app after the clean install?......did you open Preferences for SMCfancontrol and run the slider that controls the fan speed back to the left? (Apple default speed)......my 4,1 MacBook is about 1800 rpm...
-
How do you reset your ipod touch's restriction code?
how do you reset your ipod touch's restriction code?
If you no longer the restrictions code, you'll need to restore your iPod to factory settings in iTunes.
B-rock -
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I have a ipod, but recently updated my laptop, how do I get my ipod to sync with my new PC, when I connect the USB the ipod say's "connected" eject before disconnecting
See KB Article: How to use your iPod to move your music to a new computer
-
I have a lock rotation next ti my battery on my iPad 2 and it won't change from landscape and I tried to reset it but nothing and I tried from lock rotation to mute but nothing and I don't no what to do now. Can u help me plz?
With Settings > General > Use Side Switch To set to 'Lock Rotation' have you then moved the switch on the right-hand side of the iPad above the volume control 'off' ?
Or with the switch set to control 'notification mute' you should be able to unlock rotation via the far left of the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't being controlled by the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085 -
HT1414 How do I reset an iPod when an "ipod is disabled" message is displayed?
How do I reset an iPod when an "ipod is disabled" message is displayed?
Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
I lost my restrictions password and want to reset my ipod so i can put a new one on, when i try reset it it makes me put in my device password and restrictions password! How can i reset my ipod if i need the restrictions password which is why i am resetimg my. Ipod
Forgotten RESTRICTIONS Passcode
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iPod. . Place the iOS device in Recovery Mode if necessary to allow the restore.
- If you are up to file manipulation see the following but it may not work for iOS 6.1.3 or iOS 7
How to reset forgotten Restrictions...: Apple Support Communities
- How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog -
HT1414 how do you reset my ipod touch..daughter try passcode too many times now its disabled
how do you reset my ipod touch..daughter try passcode too many times now its disabled
Passcode Locked or Disabled
If nothing else will let you unlock the device - after so many unsuccessful attempts will be locked out - You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the Device.
Instructions can be found here.
http://support.apple.com/kb/ht1808 -
I have a HP wireless printer, and im trying to connected to my macbook pro. But will not connect..
I have a HP wireless printer, and im trying to connected to my macbook pro. But will not connect..
Isaaura - what printer model do you use?
While opening Safari click the Bookmarks icon and select Bonjour.. can you see the printer listed there?
(If Bonjour is not listed click Safari > Preferences > Bookmarks and check Bonjour within the Collections section)
Can you access the printer by typing its IP from Safari?
If the printer not available only thoguh Bonjour but an be reached by its IP, what router brand and model are you using?
Templeton Peck - correct me if I'm wrong, the different OS X forums have a dedicated forum for printing and scanning.. as Apple no longer produce printers about the last 2 decades I would assume those forums meant to deal with other manufactures over OS X..
john galt - Am I spelling OS X correctly? -
i have put in the smtp address and its rejecting the address, my i pad will receive but not send
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Or this - Delete the account in Mail and then set it up again.
Cheers, Tom -
Just deleted a lot of pictures on my iphone and still some how have 4.2gb I only have 628 photos no extra albums am I missing something here?
iCloud backup automatically saves your pictures, but you only get 5GB. What i'd reccomend is that you put those pics on flickr or Facebook, so you can access them anywhere, and i know at least facebook has auto upload as an option, so that any time you take a picture, it saves it to that.
Goals: Choose FB, Dropbox, Picasa, or Flickr, then enable auto upload.
In settings-icloud-storage and backup, deselect camera roll.
End result: Photos available anywhere, backed up safely, and your phone backs up. -
hi, is it possible to download apps using itunes because we dont have wifi connection, we only have an internet service connected to the PC.
There are some steps on this page for syncing a device (the page talks about iPhones, but it would work for iPads as well) to a new computer : Syncing to a "New" Computer or replacing a "crashed" Hard Drive.
When you connect an iPad to a computer's iTunes for the first time it might give you two options, to replace what is currently on the iPad with what is in that computer's iTunes library, or to set it up as a new device (i.e. remove all content from it) - hopefully the above page will get around that.
You should be able to use different computers to update the iOS version and to sync content (can you not use the same computer ?), but you will probably have to do the above for both.
If you don't currently have anything on the iPad that you don't mind losing (have you downloaded apps or other content when you've had access to wifi e.g. in shops, other people's homes ; or got any documents etc on it) then you don't need to go through the steps on that page. -
How do you reset an ipod touch when it is still stuck in recovery mode?
how do you reset an ipod touch when it is still stuck in recovery mode?
Having the same problem. Plugged into the computer, iTunes doesn't connect to it. Plugged it into the wall and the low battery bar shows up but then it goes to the black/apple screen and stays there. The screen goes black and then when it pops back on again (on its own), the apple is still there. Won't hard restart either. Halp!
Maybe you are looking for
-
How can i register my Window phone lumia 520
I have a problem in registration as a window phone developer. What are the steps for register as a window phone developer??
-
Array inner class (advice from YoGee)
Hello, I am trying to write an array of records, I think it is all OK except for when i try to loop out the results. I get an error in the last for loop at for (int x=0; x < records.length; x++) it says record.length has not been initialised.......it
-
How can i use gradient tool in Illustrator
Hello, I am trying to use gradient tool in illustrator. My image is active but how can i start using gradient tool. I clicked the tool and tried to drag with my mouse but, i can not activate the tool itself. Can any one help me, I am using CS4 extend
-
Need to work with japanese language
hi friends, i want to work with japanese languge. i had searched in sdn forums for documents related to language but i can't find the proper solution my main requirement is 1.if i log in with japanese language can i get output in english ..? 2.what s
-
I am unsure of how to retrieve values from an ArrayList using the get() method. e.g Object []array; ArrayList list; int[] intArr = {1,2,3,4,5,6,7,8}; list = new ArrayList(); list.add(intArr); array =