How do I reset my Time Capsule?

I completely lost my connection with my Time Capsule. Can I reset it completely (the type of reset that allows me to change the name of the piece)?
Tks

Just insert a pointy object into the "reset" button (at the back) for about 6-8 seconds. That will reset the TC "as new". Although if you have things on the drive, you'll also need to wipe that with Airport Utility (Disks tab).

Similar Messages

  • Hi,  how can i reset my time capsule ?

    Is it safe to unplug the power line to reset the time capsule ?

    What you are asking about is a restart.  It's OK to pull the power plug if there are no other devices backing up to the Time Capsule at the time.
    If you don't want to pull the power cable, it is possible to restart the Time Capsule using AirPort Utility. If you do not know how, tell us what operating system you are using on your Mac.
    Click the Apple icon in the upper left corner of the screen, then click About This Mac and post back with the OS X  Version that you see there.

  • How do i reset my time capsule without a password?

    Hi.
    I just bought my Time Capsule. I started it up and registered it and so on.
    Then I used the network to backup my computer, but because of the power got shut off during the night
    it stopped backing up my computer.
    Now I wanna backup my computer, but it wont let me because it wants a password.
    I didnt give it a password, but just to make sure I tried every password I could think of, but nothing.
    No I would like to ask:
    How do I reset/format my Time Capsule with out using a password?
    I tried in disc utilities but it doesnt come up (im using an ethernet cable) and nothing.
    Please help me!
    Kind Regards
    Emil

    That is strange.
    The default password is public.. just try that.
    If not a soft reset, and it should reset just the passwords.
    Otherwise do a full or factory reset.. it will not erase the disk.
    http://support.apple.com/kb/HT3728
    You can do that from inside the airport utility .. not from disk utility.. but use vs 5.6 if you are on Lion OS.
    http://support.apple.com/kb/DL1482
    Download the regional version.. ?? If that is required.

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • How do I connet my time capsule to a new network

    Hey,
    I have a Time Capsule, which is set up to my old wifi. Now I have moved, and my Macbook works with the new wifi, but I can't connet my Time Capsule, my computer can't even find it. How do I setup my time capsule to the new wifi?
    Please help me.....

    The best way is to plug the TC by ethernet to main router in the new place. Reset it to factory.. see instructions and then it will appear in your airport utility.
    You cannot connect to two different wifi signals at the same time.. if you "join the wireless" the TC will perform poorly.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

  • HT1178 reset my time capsule and connect it directly to imac only for back up

    I want to reset my time capsule and start a new complte back up ..How to reset it and use it directly connected to may imac?

    Your little comment in the profile.. it used to work before Mavericks.. might be better to fix it and use it still as part of your network. The problem is the TC is a purely network device.. It is not at all easy to use stand alone. You cannot connect directly to it by USB. It really has to be part of the network.
    I have used them plugged in by ethernet to a computer that connected to the internet by wireless. That is messy to setup but works. I will need some info to do it.
    How does the iMac connect to the network.. and what IP does it get??
    From that I can give you setup but with due warning, this may still have network issues as those bugs are in Mavericks. And you could save yourself the effort and just try to get it working as part of the existing network.
    OR.. IMHO much better solution in this case. For desktop type computer like iMac.. plug in a USB drive.. Or FW800 or even thunderbolt if you have need for real speed. Thunderbolt>USB3>FW800>USB2. Price wise.. USB3 is now same price as USB2 so that is the best choice if your Mac has USB3 ports. Thunderbolt is still very expensive. FW800 is better than USB2 but is a dead duck.. Nothing you buy will be useful as the port is being phased out. 
    But even USB2 will work faster, and be more reliable than a TC.
    My other suggestion then is to use CCC or SuperDuper and keep Time Machine as a secondary backup for incrementals. You can produce easily a fully bootable backup drive using CCC. Superduper I heard had issues but that might be fixed now. A bootable backup means if you have a disk failure simply boot the computer from the backup. It is hugely superior method. TM can also continue to be used as it works well for incrementals and restoring applications if that becomes necessary.
    Just indicate what you want and we can suggest a way forward or give details on the fix with Time Capsule.

  • How do I use my Time Capsule with hotel wired internet

    How do I use my Time Capsule as a wireless router on my hotel free internet ethernet cable?

    It may not be possible..
    If they use a web access page, then there is no way you can set the TC to authenticate.. you must use the computer to authenticate and then use the computer to bridge to the TC for wireless clients to access.
    Look up instructions on using ICS (internet connection sharing) in the Mac.
    eg for 10.6.8 http://support.apple.com/kb/PH6589
    eg http://support.apple.com/kb/PH10740
    Of course if there is no login then you could just use it.. but I doubt you would be asking if it just worked.

  • How do I connect my time capsule to iinet Bob ?

    How do I connect my time capsule to iinet Bob ?
    Just started with iinet naked ADSL, can locate/connect my time capsule - help please

    Bob is ok as a modem.. are you using voip?? If not bridge the bob and use PPPoE client in the TC..
    Or use Bob as a full modem router and bridge the TC.. either setup is much of a muchness.

  • How do i set my time capsule up to function as an external hard drive

    How do i set my time capsule up to function as an external hard drive? Is this even possible? I had a friend tell me it woudl be a good set up to get a time capsule with my Macbook Air to use as a gigantic external hard drive but then was unbale to wlak me through the setup after I bought the equipment. Any suggestions?

    It depends on what you already have equipment wise..
    Just bridge the TC..
    I cannot walk you through it either if you use v6 airport utility.. due to my refusing to run Lion until it gets network issues sorted.
    Download and run the real utility http://support.apple.com/kb/DL1482
    Go to manual setup..
    Internet tab
    Connection sharing.. select off bridge mode in the drop down box.
    You can then if you like turn off wireless under airport wireless.. The TC is now a plain network client with hard disk.
    Personally I would keep the wireless on but sort the channels manually if you already have a wireless AP or router.

  • I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    LOL!!
    I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
    Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
    Do a search on ebay.. 3g router.
    But you can get the TC to join a wireless network.
    It is a non-standard setup that Apple will not support.. the option is hidden.
    If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
    But please note the end result of this setup..
    very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
    In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this.

  • How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling?

    How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling? It is installed on my home network behind my TWC broadband router.

    Ok.. since the TWC modem is also a router.. all configuration takes place on this box.. NONE whatsoever takes place on the TC.
    There is no airport utility 7.7.3 but there is a firmware of that number for the latest AC model TC..
    Is it tall like this.
    Then it is Gen5.
    otherwise it will have a firmware.. 7.6.4 or earlier and the airport utility must be 6.3 or earlier.
    Open the Airport utility and give us a screenshot of the summary page.
    That will also help us determine that you have the TC, which version and how it is setup.
    You might want to press the edit and also give us the Internet and Network tab as they should be set correctly as well.
    I have created a DDNS through DYN.com although I am not sure how to implement this into the TC.
    You do not do anything in the TC.. set it up in the Ubee router.
    Port forward 548 to the TC in the Ubee router.
    And make sure the TC has a static IP in the Ubee router.
    Overall if you find this too hard I strongly recommend you buy a product designed for remote access .. eg WD MyCloud.. they are cheap and easy peasy to setup for remote access.. by PC or Mac and since it is built outside of Apple you not bound up in Apple limitations built into all their equipment to prevent you using it the way you want.. rather than apple want you too.. eg BTMM and iCloud being the only way apple provide for access to the TC and only when it is the main router of the network.
    You are fighting hard because Apple made this hard.. not easy.

  • How do i find my time capsule on the internet?

    I use a time capsule (combo wireless router and external hard drive) but I cannot see it on the network.  How do I make it visible?  I would like to merge all my iPhoto libraries on that drive so I can view them from any computer or device and not have duplicates scattered across multiple hard drives.

    The TC should be in bridge mode.. not setup to share over wan.. that will never work. That is assuming you haven't bridged the ATT router.
    Once you bridge the TC see if you can setup BTMM using icloud settings in the TC. As per the Apple docos.. here.
    You should also be able to directly access the TC since you have a router with dyndns client at a guess.. the setup is simply forward port 548 to the TC.
    Google search this.. there is huge number of resources available. eg
    http://useranswer.com/answer/how-can-i-access-my-time-capsule-remotely-with-iclo ud/

  • How do I access my time capsule over the internet

    How do I access my time capsule over the internet. I've already set it up to share over WAN, but I have ATT so my TC is connected to the router provided by ATT can I still access my TC via the internet even though its not directly connected to the Ethernet?

    The TC should be in bridge mode.. not setup to share over wan.. that will never work. That is assuming you haven't bridged the ATT router.
    Once you bridge the TC see if you can setup BTMM using icloud settings in the TC. As per the Apple docos.. here.
    You should also be able to directly access the TC since you have a router with dyndns client at a guess.. the setup is simply forward port 548 to the TC.
    Google search this.. there is huge number of resources available. eg
    http://useranswer.com/answer/how-can-i-access-my-time-capsule-remotely-with-iclo ud/

  • HT201945 How do I use my time capsule on an existing WIFI network?

    How do I use my Time Capsule on an existing WIFI network?

    Use an Ethernet cable to connect from one of the LAN <--> ports on your existing wireless router to the WAN "O" port on the Time Capsule and then use the setup "wizard" on your Mac to configure the Time Capsule.
    It will suggest that you set up the Time Capsule to create a new wireless network. If you don't want or need another wireless network, you can turn off the wireless function of the Time Capsule and use it as wired hard drive only.
    Leave the Ethernet cable connected at all times. If you need to locate the Time Capsule in a different area, you can put it anywhere that the Ethernet cable will reach up to about 330 feet or 100 meters.
    The only exception to using an Ethernet cable would be if your existing wireless network is provided by another Apple router. Then.....you would have the option to have the Time Capsule connect using wireless and extend the network, although using a wired connection would still be the better way to go in terms of performance.

  • How do I connect my time capsule with a Lynksis wi fi netwotk?

    How do I connect my time capsule with a Lynksis wi fi netwotk?

    You cannot extend or repeat a non-apple router in an apple router..
    You must plug it in via ethernet and then setup roaming network (or if you like a completely separate network.. makes no difference from the TC point of view). TC is in bridge mode. That is router bridge not wireless bridge.. I gave the info on the other thread you are running.. very confusing when you ask in multiple threads.

Maybe you are looking for