How do i reset pass code to unlock volume limit on ipod model mc525ll

I forget my passcode for my ipod 6th gen. model MC525LL.  i want to adjust the volume and can't without the passcode.  How do I reset it?  Thanks.

Hi blondop,
Welcome to Apple Support Communities.
If you cannot remember the passcode, you can restore the iPod nano and then set it up again. The articles below provide more details about the maximum volume limit and restoring the iPod.
Setting the maximum volume limit on iPod
http://support.apple.com/kb/ta38403#ipod
Note: If you forget the combination, you can restore iPod.
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
-Jason

Similar Messages

  • Where do i find the code to unlock volume on classic ipod

    Where do i find the code to unlock volume on classic ipod

    You can't find the code unless you ask the code to the person that setted it or restore your iPod in iTunes.
    Franklin

  • How do you reset pass code to install security update.

    I am trying to install the latest security update and I'm being asked for the security pass code which I have forgot, how do I reset it.

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • How do I reset pass-code

    I forgot my pass-code inorder to open up my mini iPad! How do I reset?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • HT201263 Found iPod touch. I advertised it for about a month. But no one come forward. To claim. How to I reset pass code? So I can use it?

    Can anyone tell me how I can rest the pass ode on iPod please.so I can use it? Thanks jan

    The proper procedure it to turn it into the police.

  • How you restore your security pass code if you have disabled your iPod, due to too many pass code attempts

    How you restore your security pass code if you have disabled your iPod, due to too many pass code attempts?

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • I had lost my old I phone 4s and bought a new one but now i found my old one and its been so long i cant remember the  pass code to unlock it what do i do

    i had lost my old I phone 4s and bought a new one but now i found my old one and its been so long i cant remember the  pass code to unlock it what do i do

    http://support.apple.com/kb/HT1212

  • HT1212 how do i rest pass code on an ipad if i forgot the pass code?

    How do I rest pass code on an ipad if I forgot the pass code?

    I hope you have updated your iPad! If not you will lose everything. You will need to a full restore as Johnathan said. http://support.apple.com/kb/ht1212
    If you have backed it up follow the process on the link provided and then restore it with this link http://support.apple.com/kb/ht1414
    Good Luck!
    joe1828

  • IPad. How do I remove pass code? Do I have to have one?

    iPad. How do I remove pass code? Do I have to have one?

    MRPowell wrote:
    iPad. How do I remove pass code?
    Which Pass Code are you referring to...? What exactly is your issue...?
    If it is a forgotten Pass Code issue...
    See Here  >  http://support.apple.com/kb/HT1212

  • HT201263 how do you reset lock code if you forget it

    how do you reset lock code if you forget it

    Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Backing up, updating, and restoring iOS software

  • HT1212 How do I reset my password and unlock my Ipod.

    How do I reset my password and unlock my Ipod touch.

    Passcode and Recovery:
    http://support.apple.com/kb/ht1212
    All data will be lost.!

  • HT4113 forgot pass code and cant get into my ipod touch

    forgot pass code and cant get into my ipod touch

    Take a look at this link, http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

  • Pass codes were set and i did not set them now it will not reset, pass codes were set and i did not set them now it will not reset

    my itouch has started asking for pass codes i did not set. i have used the same 4 digit pass code for many years. i was attempting to update to iso 7 when i went to reset the device i was prompted for the code. i tried my standard 4 dig. number. also my restriction setting is on also asking for a pass code. I have never used restriction setting EVER. i dont lock my device i dont sign out of mail. worry? no nothing to hide. it agrivates me that i learned that certain apps ive downloaded may be changing my settings and accessing information without my knowing. i dont mind the info leave my settings alone.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • How to remove anti pass code lock

    hi
    my phone has now anti pass code lock. When i try to turn on the phone, there is a voice activated. And there is a passcode screen, but it does not seem to accept my passcode. It doesnt even say that i entered wrong code or anything. It just says aloud the number i am entering. Also, my phone is not sync with i-tunes or anything. Kindly help me out

        Hello RABAIL,  Let's give you back the key to unlock your phone!  Have you tried a soft reset of the device by holding the Power and Home keys until the device restarts?  If this was not successful I may suggest restoring the device through iTunes back to the factory settings.  Here is a link to complete a restore:  http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=39607  Please keep me updated on the status as I would be happy to help further. 
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • HT1212 I have not used my ipad all day. I just used my pass code to unlock it. After it unlocked, a message stated that my ipad is disabled why?

    Why is my ipad disabled after unlocking with my pass code? It said to wait 60 minutes.  What is going on?

    Try turning off the following:
    Settings>Mail, Contacts, Calendars>Push>OFF
    Settings>Notifications>Mail>Gmail>Notification Center>OFF
    Settings>Mail, Contacts, Calendars>Fetch New Data>Off

Maybe you are looking for

  • How do you get movies off one itunes library, and into another.

    I recently bought a dvd, and it had a free download for itunes to i uploaded it. On a different user, on the same computer, i have another itunes library in which i have all my music. It didn't transfer this purchase, and is there i way i can get the

  • 2014 Macbook Pro Nvidia 750m GPU Kernel Panics

    Hello everyone, After a long battle w a Mac Pro and Davinci Resolve, I moved to a 2014 15.4 Macbook Pro Retina i7 2.7ghz with Nvidia 750m and Intel Iris (dual gfx). Any time I do anything strenuous, such as video editing or color correction, the lapt

  • Dang! Here we go again!

    I had everything going great. Premiere saw my camera, I was able to upload video, g*d was in his heaven and all was right with the world, etc. But last night I installed my Corel Draw Graphics Suite 12, which no doubt you all know something about. I

  • Query on SC?

    Hi Friends Please let  me know the ways to view SC GUI Screen I was unable to access using Tcode BBPSC01, BBPSC02 and BBPSC03 Regards Simha Edited by: simha.n on Apr 21, 2009 2:56 PM

  • Portal Role to Access SAP ERP

    Hi I have created my own portal iviews and pages by using Visual composer. It creates a sales order in SAP ERP system. When I execute it in the portal with Super Admin rights everything works fine. Perfect. But when I assign to a user that does not h