How do i reset restrictions pass code if i forgot it?

i forgot the pass code for my restrictions on my ipod touch

Forgotten RESTRICTIONS Passcode
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iPod. . Place the iOS device in Recovery Mode if necessary to allow the restore.   
- If you are up to file manipulation see the following but it may not work for iOS 6.1.3 or iOS 7
How to reset forgotten Restrictions...: Apple Support Communities
- How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog

Similar Messages

  • I forgot my password in the restrictions settings. I have 8 failed attempts now. How can I reset the pass code?

    I forgot my password in the restrictions settings. I have 8 failed attempts now. How can I reset the pass code?

    YOU CAN ALSO FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

  • Forgot my lock pass code. how do i reset my pass code

    forgot my pass code. how do i reset my pass code?

    I have a use ipod it worked when i bough  it. but did not sysnic it to my computer and starting downloading with my wirelss and put a password in it,  it work fine until my son changed my password and forgot it and now it will not sysnic wirh my computer.  I have the information from it , Still can't get it to do anything. not even with itunes. Looking for firmware to open  it to change my passcode.

  • How to get the restriction pass code for iPhone ?

    How to get the restriction pass code for iPhone ?

    if you forgot it you have to restore your phone to get past that code

  • How can I reset my Pass Code?

    My Ipod touch is Disabled because I have entered the Pass cod wrong too many times. I do not remember the code.

    Forgot an iPhone Passcode? How to reset the iPhone passcode
    iPhone and iPod touch- Wrong passcode results in red disabled screen
    IPod Touch user guide

  • I turned my 5s phone off and when I turned it back on it seems to have lost my pass code and won't unlock . How do you reset the pass code

    I have a 5S it lost my passcode when I turned it off for about 10 minutes.Phone is now locked
    How do I reset the passcode?

    Hello Lynncooper,
    It sounds like your passcode is not working for some reason to unlock your phone. This article should help you get back into your device:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    If you have previously synced your device with iTunes, you may be able to reset the passcode by restoring the device:
    Connect the device to the computer with which you normally sync and open iTunes.
    Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
    If the device is still disabled, or if iTunes does not automatically sync your device, sync the device with iTunes.
    When the backup and sync is complete, restore your device.
    When iOS Setup Assistant asks to set up your device, choose "Restore from iTunes backup".
    Select your device in iTunes and choose the most recent backup of your device.
    If you have not synced to your iTunes library, follow the steps in the section labeled:
    If you have never synced your device with iTunes, or you do not have access to a computer
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • HT201210 how do i recover my pass code that i forgot?

    i need to get on my ipad but i forgot the passcode and i tryed to updade back up but i have to put in the pass code. how do i recover it or access my ipad without lossing my photos, notes, ect??? help me please.

    Your only option is to restore the iPad. Follow the instructions in the following:
    http://support.apple.com/kb/HT1808
    There is no way to recover the passcode. It is very secure.
    You will lose whatever was not backed up as of its last synchronization. Anything that you downloaded from Apple can be downloaded again.

  • How to get the restriction pass code for my iPad

    How to get restriction pas score for my ipad

    Remove restriction passcode
    1. Restore to Factory Default
    http://support.apple.com/kb/HT1414
    2. You can restore from a backup that was done before you enable the Restriction Code.

  • How can I reset my restrictritions pass code if I forgot it?

    How can I reset my restrictions pass code if I forgot it?

    You will need to contact Support in your country to get the password and security questions reset : http://support.apple.com/kb/HT5699
    When it's been reset you can then use the steps on this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5620

  • HT201269 Forgot my restrictions pass code!! Help!

    How do you retrieve restrictions pass code if you forget?! New device and number due to switching phone carrier and restored from iTunes but having major issues! Seems to have me logged in on both devices and after 3 hours at retail store still no changes! Help!

    You cannot retrieve the restrictions passcode. If you have forgotten it, then you can only restore the phone as new. The passcode is in the backup so restoring from a backup will only put it back.

  • HT1414 forgot restrictions pass code, how do you reset?

    I forgot the restrictions pass code for my sons iTouch.  I tried using the restore function like it said in some help discussions, but that did not work.  ( hooked up to the computer, did restore to factory settings, then uploaded the apps again to his iTouch).  No change when I go the restrictions tab under general settings.  It still asks for the pass ode which of course I can't remember.......
    Thanks!

    - Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
    - Restore to factory settings/new iPod.
    - If you are up to it see:
    How to reset forgotten Restrictions...: Apple Support Communities
    How to reset forgotten Restrictions...: Apple Support Communities

  • How can I reset my sons restrictions pass code? I have failed 9 attempts and it locks me out longer and longer.thx

    How can I reset my sons restrictions pass code? I have failed 9 attempts and it locks me out longer and longer.thx

    see here
    http://support.apple.com/kb/HT1212
    No choice

  • How do I find out what the restrictions pass code is

    My son is trying to purchase some additions to a game but when accessing the App Store he is asked for the restriction pass code. However we don't recall setting one up for him and he hasn't been asked for this before. Why? How do we find out what it is?  This is since upgrading to version 5.1.

    If you restricted in-app-purchases in Settings/General/Restrictions, and you don't remember the restriction code anymore to disable the restrictions, you'll have to set up the iPod as new device again, without using the latest backup, the restriction code is part of the backup and can't be changed by restoring the device from a backup that has been taken after the code has been set.
    How to back up your data and set up as a new device
    If there are no restrictions set, the code he is asking for is the iTunes ID password, to be able to purchase and download. If you have forgotten that one, follow this article to reset it:
    iTunes Store: Retrieving and changing passwords

  • I want to reset my iPod. It says I need to put in my restrictions pass code but I don't remember it. What do I do?

    I want to reset my iPod. Every time I go to reset it, it says that I need to put in my lock screen pass code then my restriction pass code. I don't remember what the code is. Every time I try I get it wrong and then I have to wait 60 minutes just to try again. I need to know how to figure out this restriction thing so I can reset my iPod. Please help!!!!

    iOS: Forgot passcode or device disabled - Apple Support

  • How to recover factory settings w/o "Restrictions Pass Code"?

    I wish to give my late wife's iPad to her granddaughter, ...
    I wish to restore factory settings -- making it like new ...
    I cannot Restore Factory Settings without a 'Restrictions Pass Code' ...
    I don't have/don't know a Restrictions Pass Code ... 
    Online advice says, to reset Restrictions Passcode, "simply restore factory settings."
    Well, um, see #3 above.
    Can anyone help me out here?
    Many thanks!
    Stephen

    You can try to remember or get the passcode somehow. If not, the only other option is to wipe the device clean and restore it to factory settings.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

Maybe you are looking for

  • HP 320-1030 WINDOWS 7 TOUCHSCREE​N SOFTWARE AND WINDOWS 8 UPGRADE

    Just purchased an hp 320-1030 touchscreen with windows 7 operating system. The advertisement was that you could upgrade to windows 8 for $15 and HP would refund the $15.00 When you read the upgrade information it states that HP Touchsmart application

  • Writing a Stored Proc which will execute the Queries passed to it as args

    Hi, I need to write a Stored Proc which gets the Query to be executed as an Argument and return the results in an OUT Variable. The Stored Proc i wrote is CREATE OR REPLACE PROCEDURE SP_FETCH_RESULTS(l_query in varchar2, l_returnValue out clob ) is l

  • Update Opportunity partners

    Hi Experts, i've created a report to massively update the opportunity into a CRM 6.0 system. I'm facing an issue while updating the partners: when i run the report i delete the partern using these functions in this order -CRM_ORDER_MAINTAIN lt_partne

  • Who's who Infoset : Adding a custom infotype

    Dear Experts, I am in need of your valuable input on Who's who. Can we include custom infotype (9000) fields to the infoset (by coping into a custom infoset)? What is configuration needs to be done on portal side to enable the additional fields. I kn

  • Using Aperture with a Network Attached Storage (NAS)

    Hi, I would like to make my Aperture library accessible from severals Macs and for different users on these Macs --- not at the same time. The idea is that only one user from one Mac can use Aperture at a given time. The basic idea is to install the