How do i reset time and date on my itouch

how do I reset time and date on my itouch?

Go to Settings>General>International and make sure that Calendar is set to Gregorian.
Bext
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

Ibook G4 shuts down unexpectedly and resets time and date

More and more frequently my iBook will shut down completely unexpectedly when not plugged in. This happens regardless of how much battery life it has or it claims to have (80%, 40%, 20%, 12%). It will not start up again from battery only. When I plug the computer and restart it, it has reset time and date to Wed March 31 1969, 19.31 pm. It alerts me that the time is set to before 2001 and this may lead applications to behave erratically.
Is this normal? Why is this happening?
I have a few months left of my APP, but that doesn't cover battery related problems, right?

Hi astaver and welcome to Apple Discussions.
If you are still using the original battery from a nearly 3 yrs old iBook then it is almost certain that the battery has reached the end of its useful life. The symptoms you describe more or less confirm this.
To check on battery health go to the Apple Menu>About this Mac>More Info>Power>Battery and copy/paste the info into a reply.
You can also download and install Coconut Battery which gives a GUI to the same info.
You are right in assuming that Applecare doesn't cover you for a dead battery of this age but you might like to see if you qualify under the iBook & PowerBook G4 - Battery Exchange Program.
Good luck,
Adrian

How to get current time and date??

How to get current time and date from my PC time and date to the java application??
i use java.util.* package but got error, that is:
- java.util.* and java.sql.* class are match
- abstract class cannot be instantiated
so what can i do, pls guide...thanks...

There is a method in the System class that will return the current system time. You could also instantiate a Date, Time, Timestamp, or Calendar object, all of which get created with the system time by default.
Don't import *. Import the specific classes you need.
Next time, post the actual text of the exceptions/compile errors. If you make people guess, most just won't bother.

I own an old PowerBook G3 that turns o only on battery. And, even so, always resets time and date. Whenever I connect the power cable, it turns off.

I own an old PowerBook G3 that turns o only on battery. And, even so, always resets time and date. Whenever I connect the power cable, it turns off. In addition, I a interested in refurbishing my old G3. And, a lesser old G4 LCD that shows a yellow vertical hair-width stripe.
Thank you in advance.

What model PowerBook? The internal PRAM battery has discharged and is not recharging. You'll need to replace the battery. This site has instructions. http://www.ifixit.com/Browse/PowerBook
The PRAM battery is not easy to change on some PB G3 models. I changed the battery on a Wallstreet model. Had to totally disassemble to do it. Bought the replacement battery on eBay.
 Cheers, Tom

Why is my macpro reseted time and date?

Ok,eventually my macpro reseted his date and time to something about 2001... The point is,that i bought this laptop from a friend few months ago, and i even forgot to ask for a login password,and after that and didnt even consider reseting users. The problem with the time and date change,came another problem,i cant even use safari regulary,on sites such is facebook,or even apple .com,without getting a verification security verisign,without blocking the site that i am trying to get in to. Only way is to "trust" that site is manually sign it as "trusted" with your login and a password from your mac. Which i dont know,even my friend dont know the password,the one that i bought it from. Just to make some things straight,its not stolen,i bought it from an original owner,no matter how awkward this situation looks like. Thanks in advance for a any ideas.

Hi all
I have the same problem. When I put the touch to sleep, it seams that during the sleep phase, the time stands still and after power it on again, the time & date is reseted to the default settings.
Hope someone have an idea or a solution for this problem.
Cheers, istvan72

How to get System Time and Date?

Hi, may i know how do i get the System's current Time and Date?? And i need to format them into 2 separate String, that's Time is a String, Date is another String. Pls guide me. Thanks a lot!

What's the problem? The previous example was pretty clear. Just adapt it to your purposes...
        Date currentDateAndTime = new Date();
        SimpleDateFormat dateFormat = new SimpleDateFormat("dd-MM-yyyy");
        SimpleDateFormat timeFormat = new SimpleDateFormat("HH:mm:ss");
        System.out.println(dateFormat.format(currentDateAndTime));
        System.out.println(timeFormat.format(currentDateAndTime));

How to get system time and date with PHP

Dear Mr.Craig,
Thanx a lot. We are running SRM 5.0 (RAMP - Implementation).
My initial requirement is to write a server-side script to display server date and time. Could you give more inside on how to achieve it?
Regards,
Deva.

Perhaps that will help.
[code]
<html>
<h1>Access System time and date</h1>
<?
     // saprfc-class-library
     require_once("saprfc.php");
     $sap = new saprfc(array(
   "logindata"=>array(
   "ASHOST"=>"localhost"          // application server
   ,"SYSNR"=>"00"                    // system number
      ,"CLIENT"=>"000"               // client
      ,"USER"=>"bcuser"               // user
      ,"PASSWD"=>"minisap"          // password
     ,"show_errors"=>false               // let class printout errors
     ,"debug"=>false)) ;                     // detailed debugging information
     $result=$sap->callFunction("MSS_GET_SY_DATE_TIME",
        array(     array("EXPORT","SAPTIME",array()),
           array("EXPORT","SAPDATE",array())));
     if ($sap->getStatus() == SAPRFC_OK) {
    echo "Time: ".$result["SAPTIME"];
    echo "<br>Date: ".$result["SAPDATE"];
    echo "<br>or<br>";
    echo "Server is showing: "
         .substr($result["SAPDATE"], 0, 4)
         ."-".substr($result["SAPDATE"], 4, 2)
         ."-".substr($result["SAPDATE"], 6, 2)
         ." and "
         .substr($result["SAPTIME"], 0, 2)
         .":".substr($result["SAPTIME"], 2, 2)
         .":".substr($result["SAPTIME"], 4, 2);
     } else {
          $sap->printStatus();
     $sap->logoff();
?>
[/code]

How To Include Current Time and Date in Form

Does anyone know how I can include the time and date in the
body of a form mailer? Our system allows the receiver of each
submitted form to copy the body of the form entries and paste them
into either Excel or FileMaker for database building. They would
like to have the time and date also appear somewhere in the
submitted body so they will not have to do a seperate copy/paste of
the time and date seen in the header... I followed the javascript I
found in the Adobe website and included it within the form, but
when I ran a test nothing showed! Here is the form...
Click
Here to see the Form
Thanks for your help! -D

Can you not use when the email's timestamp?
Also, in z7's script, beware the common mistakes, if you try
to retype it - .getDate() gives the day of the month (1-31), but
.getDay() gets the day of the week (1-7). To make it more
confusing, .getMonth() gets the month (0-11), so you have to add
one to make it human-readable. The script posted is correct, but I
went round and round with my PC when I tried to do that the first
time!

How to know the time and date when someone empty trash?

someone delete very important videos on my mac PC , i need to know the time and date of what happens on my pc for 2 days ago to can know who delete these files and when the trash being empty
also, i tried very hard to recovery these videos by using Data rescue program but i found old videos instead of the last videos hasa been removed??? i don't know how???!!
so can anyone help me please

Open the Console app located in HD > Applications > Utilities
Select System Log on the left.
Type trash in the search fileld top right corner of that window.
That should reveal the date and name of the file or files that were deleted but they cannot be extracted from there.

UC320: how to set (correct) time and date, upload own AA messages, get caller ID, telnet?

Hello there,
Just trying out the UC320 I got borrowed from Cisco AT for testing with firmware 2.1.2 (1) localized for Austria.
The device is connected to the cable modem of my ISP (Kabelsignal) utilizing two FXO ports, getting an IP address from my DHCP being connected to a WS-C2960G-24TD (LAN 1@UC320 connected to Gi0/18@C2960G port macro Cisco Switch enabled).
Now I would like to try/see the following features:
- a correct time and date: huh? hwo/where???
No option to set this right??? No NTP option??? Am I just blind or too stupid to find that option/s?
- upload own messages for the AA: ok, there are german messages but someone might have a little bit personalized ones - maybe telling callers the company name before asking them to dial the extension if they know it. Making custom messages is not the problem - but how to upload and in which sound/data format?
- caller ID: my ISP told me that he transfers the caller ID correctly to analoge end devices if caller ID is available and not suppressed. All I can see when a call comes in is which FXO Port is being used by that call. So callback entries on the SPA phone is senseless. Any advise?
- CLI: You can telnet the device - but which credentials to use to successfully logon? The pre-assigned credentials form Cisco AT are not accepted for logon.
BTW @Cisco guys: I am also voting for support for the older SPAs (e.g. 942)

Hi Claus,
Thanks for giving the UC320W a spin and glad you found the support community! Let met see if I can help answer your questions....
Time/Date & NTP -- The UC320W is preconfigured with Cisco's Small Business NTP server. The preferred method for correct time you will need the UC320W WAN to be connected with Internet access. If there is no WAN connectivity there is a feature in the 2.1.x firmware where you can set the time on a SPA phone GUI and it will then update the system time. Alternatively, if you have a LAN side NTP server that is on the same subnet as your Data VLAN subnet, you can use the NTP.pmf file found here: https://supportforums.cisco.com/docs/DOC-16301
Upload custom Music on Hold and Auto Attendant prompt files. We are currently in beta of a new Cloud service. To participate in the Beta, please send an e-mail to [email protected] requesting MoH/AA Custom files Cloud Beta participation.
Caller ID on FXO: Make sure that you have run the impedance matching tool on each of your FXO ports. For additional information on running the Impedance Matching tool and Caller ID troubleshooting, please see the UC320W Troubleshooting Guide.
CLI access -- This is for Cisco Support personnel only for low level debugging. This is not a IOS based device and there is no command line access for provisioning.
Cheers,
Chris

Unable to reset time and date after a software upgrade

unable to reset the time and date after a software upgrade on the TV

hello
I'm having a similar problem with my macbook. I just did a software update and now I can't get onto my internet. I checked the network diagnostics and the connection is fine, except when i click on the safari icon nothing happens.
Can anyone help with this?
Thanks!

I have to reset time and date after booting

My mac pro cannot hold date and time.
so far, I have replaced the pram battery and done the pram reset several times.
at first i noticed that the sys pref panes were unlocked when I went in to change the time and date but I have since cured that in sys pref/security.
the governing factor seems to be wetherr or npt is a revoot or completely cold boot (mains power switched completely off)
the expected message comes up i.e. " your system clock is set to a time and date before 1.1.2008 some progs may bave erratically blah blah "
the actual time has reset to 1.1.2001 ( dont know if that is significant but mentioned it just in case).
So, if i just shut the machine down and then boot it up again, no probs
if i restart, no probs
shut down and pull the plug ?? 1dt, Jan 2001
would appreciate some advice

Click here and ask. If they tell you to call, and they probably will, accept that.
(123024)

How long should setting time and dates take?

I have hooked up my apple tv, and it is still "setting time and date" after 2 hours.
How long should it take?

You have a network problme. ATV is not able to connect to the internet, so it is not able to set it's date and time.

MSI 760GM-P34 (FX) restarts and resets time and date

this motherboard started resetting itself, especially on Facebook.
I will be surfing or whatever and it will shut down and restart.
I get the normal windows error that it shut down unexpectedly and then everything loads normally.
if I shut it off completely, then restart, I get one beep then two beeps and it resets the time and date to 2012.
I have replaced the battery, reset the bios with the jumper, tested the hard drives , CPU, power supply, card reader, video card, and everything else. All checked out fine and in working order.
the computer seems to run fine as long as I don't shut it off or as long as it don't reset its self.
the temp is around 70 degrees and everything seems fine otherwise.
what could be causing this?
I like MSI boards but I'm thinking of going with ASUS or another brand if this motherboard is taking a crap after only 2 years. (I bought it Brand new)
MSI 760GM-P34 (FX)
AMD Phenom 2 X4 955 Black Edition..Never overclocked
XFX PRO 650 WT Power Supply
8 gigs Crucial Ballistic DDR3 memory
Hyper 212 Plus CPU cooler
Geforce 9800GT video card
Seagate 320 GIG SATA HD
Seagate 500 Gig SATA HD

Quote from: badboy2k on 17-June-14, 15:46:27
if you do not have it installed already download MSI Control Centre from here http://www.msi.com/support/mb/760GMP34_FX.html#down-utility&Vista%2064 and install it! start the program and click overclocking-Basic and see what it says the DRAM voltage is set to there!
it basically goes from " Core" X 800 - 2173.5 and "Ratio" X 04 -X 10.5
CPUID HWM shows this:

Macbook procannot reset time and date

I have macbook pro (2009). The time and date has been set to prior to 2008 and does not allow me to modify.

Back up all data.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Please triple-click anywhere in the line below on this page to select it:
sudo date 0109000014
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. You'll be prompted for your login password. Nothing will be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. You don't need to post the warning.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
Wait for a new line ending in a dollar sign ($) to appear below what you entered. You can then quit Terminal. Try again to set the date.

How do i reset time and date on my itouch

Similar Messages

Maybe you are looking for