How do I reset to default or change static IP address on HP Officejet Pro 8600 Premium printer?

How do I reset setting to default or change static IP address on HP Officejet Pro 8600 Premium printer?

Hi,Tap the right arrow and then tap the Setup icon.Tap the Network option and select Restore Network Defaults.Confirm any prompt to restore the default network settings, it will remove any manual IP configuration. If you are wirelessly connected to the network, select Wireless Setup Wizard and select your network to reconnect the printer wirelessly. Regards,Shlomi

Similar Messages

  • Unable to reset or add new email addresses on HP Officejet Pro 8600 Premium e-All-in-one N911n

    Unable to reset or add new email addresses on my HP Office jet J4680

    Hi johndavis196,
    Welcome to the HP Support forums.  I see that you are trying to add new email addresses to your Officejet J4680 printer.
    To better assist you, would you please provide some additional information:
    How is the printer connected (USB cable, ethernet, or wireless)? The Officejet J4680 supports all three methods.
    What operating system are you using on your computer (Windows 7, Mac 10.8, or Windows 8, etc)?
    Where are you trying to update the email addresses?
    Are you encountering any error messages? If yes, what is the error message and where is it displayed (printer or computer)?
    What steps are you taking before you are stopped?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How to Change Wi-Fi Channel Used by Wireless Direct on HP Officejet Pro 8600 Premium?

    I would like to change the Wi-Fi channel that is used by Wireless Direct between my Lenovo laptop and my HP Officejet Pro 8600 Premium to reduce interference from other nearby users of Ch. 6 in my condo complex. (I am not using a wireless router setup to connect to the printer.)
    Is this possible?  If so, how?

    Ah... ok.  You are using the Wireless Direct with the printer.  You computer is wireless to channel 6.  That is all you can do unless you changed the router's wireless channel which will only automatically switch on your computer. 
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How do i get the hp officejet pro 8600 premium to print from my ipad2 using airprint?

    how do i get the hp officejet pro 8600 premium to print from my ipad2 using airprint? The iPad does not see the printer.

    Hi RiverBirch,
    What brand and model is your router?
    First, connect your printer to your router.
    1. From printer front panel, press Wireless>Wireless Settings>Wireless Setup Wizard and follow the onscreen instructions to successfully connect your printer with an IP address.
    Secondly, connect your iPad to the same router.
    1. Connect your iPad to the Internet and download the free HP ePrint Home & Biz app from the apps store.
    2. Connect your iPad to the same network as the printer. Settings>Network.
    3. Use the new HP Home & Biz app to print and scan photos or docs from your iPad!
    Alternatively, you can also perform Airprint on the iPad thru the wireless network from the Photos menu in your iPad.
    Please click the blue Kudos star in the post that helped you.

  • How do I remove a computer from the "Scan To" list on HP OfficeJet Pro 8600?

    I had a computer configured to use my scanner. It's now gone, never to return. How do I remove it from the list?

    i had the same issue
    i powered the printer off and back on. It cleared the scan to list of all computers that were not on the network.

  • My HP Officejet Pro 8600 Plus prints emails as landscape only; how to set to A4 as default?

    All of a sudden my printer has set to landscape printing of emails; how to set it portrait as default for printing?

    Hi there @OB1214 , welcome to the forums
    I understand your emails are printing in landscape. If the issue is only when printing emails, there may be a setting within your email settings to change the print settings.
    If all of your programs are printing in landscape, check the print settings on your computer.
    Changing Print Settings in Mac OS X
    Changing Print Settings in Windows 7
    I hope that helps!
    If the problem continues, please let me know the details and also which OS you are running.
    Thank you
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How do i install ink cartridge on hp officejet pro 8600 premium?

    Not having an easy time setting up my printer.  I don't see where the ink cartridges go.  I opened the front panel; but I don't see where or how the ink sets in the printer.  I think I am missing something.  Can some one help me.  Thank you,
    This question was solved.
    View Solution.

    Hi,
    Make sure the printer is turned on first, and then try following video below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02872323&cc=us&dlc=en&lc=en&product=4323652&tmp​...
    Please let us know of any problem you may have,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How do you wake up a sleeping HP Officejet Pro 8600 wireless printer?

     The printer appears to be in sleep mode, with the power button alternating between dim and bright. Printer does not function and pressing the power button does nothing. The only remedy I have found is to unplug the power cord and restart the printer. Is it broken or is there a trick to waking this thing up?

    on your printer's settings, please make sure that Schedule setting is set to OFF. If it is, your printer should wake up as soon as you touch the screen or the arrow touch buttons.
    one of my interests is troubleshooting printers. \o/

  • Re: how do i find my eprint email address for a officejet pro 8600 plus?

    I need step by step instructions to locate my eprint email address for eprint services for my HP 8600 Pro N911a

    Check out the link below....
    Getting Started with ePrint
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&dlc=en&docname=c02908385
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • How do I print panoramic photos on an HP Officejet Pro 8500A Plus printer?

    How do I print panoramic photos on an HP Officejet Pro 8500A Plus printer?

    Thank you for this link! Actually I installed a brand new Windows 8 system in January 2014 and then bought the HP Officejet Pro 8600 Plus printer a few days later. To install this printer I did not use the CD that came with it but already used this link. Just to be sure that I have the latest version I again reinstalled the driver. The result is definitive: You cannot print common photo paper sizes like 4x6,  5x7, 8x10, etc. via a PC using photo SW like HP Photo Creations, MS Gallery, Windows Photo Viewer or any other SW on a HP Officejet Pro 8600 Plus. The reason is most likely that HP marketing decided that an Officejet should not be smart enough for photos, after all the company sells also Photosmarts. Because you cannot create your own formats  you are limited by the driver to what is typically available in an office, in this case:  A4, Letter, legal, Statement, Executive, A4, A5, A6, B54 (JIS), Envelopes #10-DL-C5-C6-A2-Monarch, Japanese Postcard, Japanese Envelope Chou #3-#4, L, 2L, O**bleep**u hagaki, Index Card Letter-A4, Edge-to-Edge Letter-A4, Env. Japanese No 3-No 4 and that's it, not more. Thank you anyway for trying to help me but in this case only the SW developers in HP can help.It would be great to be able to print from time to time a 4x6 photo on this printer like I would do.Copying photos on a USB stick or on a SD card first and then use this way to print on the printer is too cumbersome for me.

  • On a Mac how to set Officejet Pro 8600 for black ink only printing

    How do I set up the Officejet Pro 8600 to print in black ink only (working from a Mac)? The printer was already installed and is functioning.

    In the Print dialog box is a Black & White option.
    You can also select Black & White printing from the Presets drop-down:
    Hope this helps.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • How can I Print a 4X6 postcard on a hp officejet pro 8600

    How do I print a 4X6 postcard on a hp officejet pro 8600?  I've got postcards in the tray 1 slot on top of the printer, and have selected 4X6 card in the properties with both the auto select and tray one, but no matter what I do, it still prints out from tray 2 on 8X11 paper. Any help would be appreciated?

    Hi, Please install the latest firmware from link below for the printer and try again. Assuming your printer is Officejet pro 8600 premium or plus http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-102210-4&cc=us&dlc=en&lc=en&os=4063&product=4323648&sw_lang=

  • How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?

    How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?
    I have seen this question asked previously and it seems there is no answer.
    I know that one can change each individual web page (that reset defaults back to 100%) and, alternatively and apparently one can load an add-on to fix the default size at Full Zoom.
    ... But any hints on how to achieve a DEFAULT 125% zoom would be much appreciated.

    Press CTRL + 0
    Have you tried Firefox's zoom feature? Font size and zoom - increase the size of web pages
    You can "zoom" all sites using this add-on: [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
    After installing NoSquint, click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
    If you don't have the Add-on Bar displayed, you can right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
    You can experiment with sizes larger than 125%, but I wouldn't go much higher than 150% unless you have a large high-resolution monitor.
    If there are particular sites that still present a problem, feel free to post their URLs.
    You can find more information about the zoom features Firefox offers in these articles:
    [[Text zoom]] - For zooming text only
    [[Page zoom]] - For zooming the whole page (including images etc.)

  • HT5312 I forget answers to security questions,on the other hand rescue email address that Apple use to send me email is not correst,how I can reset security questions or change rescue email ?

    I forget answers to security question , on the other hand rescue email address that Apple use to send me email is not correct , how I can reset security questions or change and make correction for rescue email address ?
    Please send me answer to [email protected] or [email protected]
    Thank you

    You need to contact Apple. Click here, phone them, and ask for the Account Security team.
    (87669)

  • Change sided printer back to default single sided printing on hp Officejet Pro 8600 printer

    How to change 2-sided printer back to default single sided printing on hp Officejet Pro 8600 printer.

    Hi @rdwill13 
    You can change the default back to single sided in the preferences. I can help you with this. What operating system and version do you have? Mac or Windows?
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for

  • Report as pdf issue in citrix

      Hi, I have created a report in navision where it is : 1) Saved and mailed in pdf format : For this i have used the location of filedirectory as TEMPORARYPATH. 2) Save as pdf : where i have used codeunit 412 to save the report on user desired locati

  • Tables not showing up in schema browser (3.0 final)

    I don't know if this has been posted by anyone else, or if anyone else if having this problem, but if I expand the + under the Tables collection, I don't get any tables. I supposed that it was a filter problem because when I clear the filter, the tab

  • Anyone know of a tutorial for jxinput?

    I really need to learn how it works but i dont know how! Does anyone know of any tutorials or something to learn it? Ant...

  • Tables with JSF

    Hi, I need to use Tables (the same that HTML), but in JSF. I test with panelGrid and panelGroup, but I can't to to merge two or more columns (as "colspan" in HTML). How I can do this?. Thanks by any help. Tania.

  • Button to flag a topic as 'solved'

    Is it an idea to provide every topic with a button to flag it [SOLVED]? I know you could edit the original post title if you are the original author, but many people still seem to forget/not know about this option. If this is done in future there can