How do I reset to factory settings on OS X 10.6.8 when install disc is 10.5.5?

Hi, I'm ready to sell a MacBook Pro I bought off a while ago on eBay that came with OS X Snow Leopard. The install disc that came with it however only included OS X Leopard. My question is that how do I reset the computer back to its default setting (erase all personal data) but keep Snow Leopard. I really need the answer quick. Thank you.

Prepare Your Mac for Sale
Boot from the OS X Installer Disc One that came with the computer.  After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.  After DU loads select the startup volume from the left side list then click on the Erase tab.  Set the format type to Mac OS Extended (Journaled) then click on the Options button.  Select the one pass Zero Data option and click on the OK button.  Then click on the Erase button.
Note: You can skip the Zero Data option if you are not concerned about removing sensitive personal data from the hard drive.  If you choose to skip this part of the process then it is possible for others to recover data from the hard drive.  The Zero Data procedure will prevent others from getting access to your personal information.
This process will take 30 minutes to several hours depending upon the size of the hard drive.  After formatting has completed quit DU and return to the installer.  Now complete the OS X installation.  At the completion of the installation do not restart the computer.  Instead just shut it off.  The next user will be presented with the Setup Assistant when they turn on the computer just as it would if new out of the box.

Similar Messages

  • HT201365 how do i reset to factory settings on iPhone 4S?

    how can i dump my iphone and set to factory settings?   I did a sync with itunes and after i noticed my camera and siri are gone!   its a 4s so i really hate not having these two features,  the guy at apple store had never seen it before and found my back ups to be too late and already with this strange anomoly as part of my earliest saved backup.   dont have backup that is not flawed.  he said i can dump it and start again i guess.  got my pics saved now on my hp but how do i dump my phone back to original settings?

    Did you check Settings>General>Restrictions to be sure that Camera and Siri were both turned on?

  • How do i reset to factory settings without the disk?

    I want to reset my Imac to factory settings but I do not have the disk. Is there a way to do this? If not where can I get another reset disk?

    1. If the Mac shipped with Mac OS X 10.6.3 through 10.6.8, no. If it shipped with Mac OS X 10.6.2 or earlier, you can buy and use a retail DVD; for Intel Macs, these are available on the online Apple Store. If it shipped with Mac OS X 10.7 or newer, restart with the Option, Command, and R keys held down.
    2. Phone AppleCare and order replacements, or see point 2 above.
    (109541)

  • How do you reset to factory settings

    reset to factory settings

    Restore as new: iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad or iTunes- Restoring iOS software.

  • How do you reset your factory settings for calibration?

    I calibrated it and now I hate it. The photographs are all messed up and everything is darker than it used to be. I really want to reset it to what it was when I bought it a year ago. I don't know what to do. Please help!!!!

    Use the File/Find... command within the Finder and search on the term "windowserver". Finder should find files like com.apple.windowserver.plist and com.apple.windowserver.xxxxxxx.plist where xxxxxxx is a string of numbers and letters. Throw all such found files in the trash and restart the Mac.
    The discarded files will be automatically recreated by OS X when it restarts and discovers them missing. The newly created files will have factory default values, meaning a clean start with all display devices that have ever been attached to it, including the built-in display. If you have done calibrations for other (external) monitors, those will also be lost and have to be redone.

  • My laptop had to be reset to factory settings. prior to that i had all my itunes songs stored on a portable drive. how do i get itunes to recognize the drive as its library?

    my laptop had to be reset to factory settings. prior to that i had all my itunes songs stored on a portable drive. how do i get itunes to recognize the drive as its library?

    If the library file is on the external drive, hold <SHIFT> while launching iTunes.  When it prompts to select a library file or create a new one, point it to the location of the library file.
    If the library file was on the internal harddrive, easiest solution is to restore it from the backup.  If no backup exists, use File > Add Folder to library.  Also under Edit > Preferences > Advanced, change the library location unless you want iTunes to move the media to the internal drive.

  • HT201263 My phone screen is cracked and my LCD is broken.  I need to reset to factory settings before I discard it, how can I do this?

    My phone screen is cracked and my LCD is broken.  I need to reset to factory settings before I discard it, how can I do this?  I was able to get it into recovery mode, I unconnected it from my Find my iPhone (i couldn't erase that way because I can't connect to WIFI with the screen not working).  I clicked restore iPhone from iTunes, but it's been sitting on "Contacting the iPhone software update server..." for over 40 minutes.  Should I restart this process or is it supposed to take a really long time?  Thanks!

    My phone LCD is broken and I need to reset to factory settings before I discard it like how you did earlier but how do you got into recovery mode to unconnected it from your Find My iPhone as I can't connect to WIFI with the screen not working?

  • Re: Nokia N8 how to reset to factory settings

    reset to factory settings code error

    himanshu225 wrote:
    reset to factory settings code error
    Do you mean that it won't accept lock code with default value of 12345 unless altered by yourself, when trying to carry out *#7370# reset?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • IPhone 4s update was interrupted and message said phone had to be reset to factory settings.  Lost all photos from phone in process of transferring to pc.  Copy of my backup overroad that phone and all the old data and photos are gone.

    My boyfriend and I share an iTunes account. I just tried to update his phone and during the update an error message occurred saying that his phone had to be reset to factory settings.  It said it was an un setup phone and needed plugged in to iTunes.  With no other choice, we had to select reset to factory settings. Now, my phone backup through iCloud downloaded onto his and all of his contacts and photos were overridden by mine.  His photos were in process of transferring from the phone to the pc while this occurred and over 900 of them were complete when this happened.  They don't show up on the pc now either since the sycn wasn't finished.  Is there a way to get them back?  When we plug his phone in now it shows my name instead of his so I'm not sure how to get to an old version of his backups even. 

    Error -1 indicates a hardware issue with the device.
    Read here > http://support.apple.com/kb/TS3694
    The device should still have warranty but unfortunately any service needs to be done in the US.
    Warranty check > https://selfsolve.apple.com/agreementWarrantyDynamic.do
    Is it possible for you to send the device home and have a family member take it to the Apple Store?

  • Why wouldn't my iPod Have a reset option to reset to factory settings I believe I received a display iPod it came with games you can't play if you click on them it says for demonstration only and I can not download any apps or games wth do I do

    i bought this 3 months ago didn't open it or anything I know big idiot but it was for my daughters bday today she opens it and stuck to the back of it was a yellow sticker saying display model. What..... Ok so we charge it she can't wait to download her little grs and play and nope it won't let me download any apps or games so I tried to sync it with her brothers and no it won't so I google it  to find out how to reset to factory settings looked so easy should have known I go to settings then general and yep no reset option so I try the iTunes thing with the laptop nope didn't work I am ready to try the hammer you know where you continually beat the darn thing till you feel better ugh please any suggestions would be so appreciated

    You should be able to force it into recovery mode and restore it. Provided, that is, that it's not also activation locked. If there's an iCloud account set up on it with Find my iPod enabled, you're pretty much hosed.
    You may want to try contacting Amazon to see if you can return it. Was it actually sold by Amazon, or by a 3rd party? Amazon is getting to be as bad as eBay any more with all the 3rd party sellers.
    Amazon is NOT an authorized source for any Apple products. What you got was, as you have already figured out, a demo model. It was probably either liquidated along with the rest of the inventory from a brick and mortar retailer that went bust or possibly even stolen.

  • My Windows 7 laptop had to be reset to factory settings and iTunes was wiped. I have all my songs and playlists on my iPod. Is there anyway to transfer the songs back over, but storing the number of plays I have and carrying across my playlists too?

    My laptop had a few problems and it had to be reset to factory settings. Meaning my iTunes was wiped clean and I had to reinstall it. My previous iTunes (and current iPod nano) has 13 playlists, over 2000 songs and a record of plays going back 2 years (which i would like back since a lot of my playlists are play based).
    I've followed guides online, and i've managed to get my songs from my iPod to my computer and thus onto iTunes again. But neither the play count, nor the playlists are transferring with these methods.
    Considering when I first bought this laptop I had to redo all my playlists and I KNOW how time consuming and bloody annoying it was I'd rather not do it again.
    Is there anyone that can give me a step by step guide of how to do this?
    I would GREATLY appreciate this, as at current i'm refusing to sync my iPod again as I am so desperate to cling onto the playlists and plays I have, which means no new songs...
    Please help if you can.

    The Ipod works fine.
    Battery charges regularly with the occasional glitch.
    Running iTunes 11.1.1.11
    I figured a Nano would probably connect in a simpler way than the touch, but only have a couple computers and cables to test.
    I've reinstalled iTunes, but not the full suite, and not all traces. I will attempt this, but I suspect its related to my touch. I was able to connect other iphones to my itunes without issue, using the same cable.

  • IPod Classic (7th Generation) won't reset to factory settings...

    Hi, I have a Apple iPod classic 160 GB Black (7th Generation). I had tried to sync it to my MacBook Pro, which the iPod was set up with, will not show up in iTunes. I will get an error message "The iPod "iPod" could not be restored because it could not be found." Then I'll get another error message "iTunes cannot read the contents of the iPod " Chris' Classic 160 iPod." Go to the Summary tab in iPod preferences and click Restore to restore this iPod to factory settings." When I go to "About this iPod" it shows that there are no songs, movies, photos, podcasts or contacts. There are four games loaded on the iPod. But, it shows 41.5 GB used and 107 GB free.
    This is what I have done up to this point:
    Disconnect and reconnect your iPod to iTunes, and then attempt to restore or update the iPod again. Also, I've tried other USB cords.
    Restart your computer and then attempt to restore or update the iPod again.
    Try connecting your iPod to a different USB port, and then attempt to restore or update the iPod again. Connecting to a USB 2.0 port is recommended. For Windows computers, refer to Identifying USB 2.0 ports on your computer for instructions.
    Remove any USB devices not manufactured by Apple that you have connected to your computer (it is not necessary to remove your keyboard or mouse). Then, attempt to restore or update the iPod again.
    Update to the latest version of iTunes, and then attempt to restore or update the iPod again.
    How do I clear out that 41.5 GB from the iPod? What can I do to reset the factory settings on the iPod?

    Do the iPod disk diagnostic on your iPod, as in this excellent earlier post by tt2.
    It wont fix your problem, but help us in troubleshooting.
    then, Use Disk Utility->FirstAid->Repair ( may take 30 minutes )
    Failing that Disk Utility -> Erase
    This will reformat the iPod ( try using FAT32, instaed of HFS+) may take 4 hours.

  • TS4006 I need to erase my ipad and reset to factory settings in order to sell it but it won't do it

    I need to erase my ipad and reset to factory settings in order to sell it but it won't allow me to do it and it keeps coming up with a passcode that it won't take either how do I get around this ?

    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5661
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Can't Reset to Factory Settings... Please Help!!!

    I have a Compaq Presario CQ56 that I am trying to reset to factory settings but when I go through the steps of resetting everything g is fine until I get to the Compaq recovery manager the system recovery is so I can highlight it to do the reset. It will only let me do the system restore in that tab and I don't know why. Can someone please help get me last this? Thanks in advance

    Hi
    From Windows and F11 partition the recovery option is not enabled is that correct.
    Activate Recovery partition
    Right-click on "Computer" icon and select manage.
    2.This will launch the Microsoft Management Console.
    3.On the left side of the MMC, click on "Disk Management" and it will show you all of the partitions.
    4.Right-click on the "HP Recovery" partition and select "Mark as Active Partition."
    5.When the warning prompt appears, select "Yes" - Reboot and it will automatically boot into the Recovery Manager (without pressing F11).
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Hi, I have an ipod classic that was synch to itunes on my laptop. Laptop got a virus, so I reset to factory settings. Downloaded itunes, it recognises my ipod, but does not synch

    Hi, I have an ipod classic that was sync to itunes on my laptop. Laptop got a virus, so I reset to factory settings. Downloaded itunes, it recognises my ipod, but does not sync. Not sure how to now sync itunes and ipod

    Restart your computer and attempt to restore again.

Maybe you are looking for