How do i reset to factory settings without the disk?

I want to reset my Imac to factory settings but I do not have the disk. Is there a way to do this? If not where can I get another reset disk?

1. If the Mac shipped with Mac OS X 10.6.3 through 10.6.8, no. If it shipped with Mac OS X 10.6.2 or earlier, you can buy and use a retail DVD; for Intel Macs, these are available on the online Apple Store. If it shipped with Mac OS X 10.7 or newer, restart with the Option, Command, and R keys held down.
2. Phone AppleCare and order replacements, or see point 2 above.
(109541)

Similar Messages

  • I'm having a small problem when trying to restore my macbook to the factory settings without the disk

    Hey, everyone. Just a quick question. I know that to reset a macbook to it's factory settings without the disk you press the OPTION key during startup; however, when you do so, apparently you see 2 hard drives and one says "recovery." When I do it, I only see one hard drive that does not say recovery. Any one know why this could be? Thanks so much for any help offered.

    shldr2thewheel wrote:
    that option is only for 10.7 and higher.  for 10.6 you need the disk.
    I have 10.8 installed on this computer...I know it didn't come with it, it came with Snow Leopard....Anyway I've updated it, and when I boot if I press and hold the Option key, it still just boots off the drive.  The only way I can get it to spring to life and do anything else is to press and hold Command + R in which case it then goes to the recovery option with the ability to restore OS X...Am I missing something??

  • After i ran the installer program to reset to factory settings, in the Disk Utility menu there is no hard drive listed.  How do I properly install the OS?  On the left hand side it lists: 250.06 GB Hitachi HTSS..., Mac OS X Install DVD, HL-DT-ST DVDRW G2

    The open window says, "Mav OS Install DVD" when I choose Disk Utilities.  The options listed on left are: 250.06 GB Hitachi HTSS..., Mac OS X Install DVD, HT-DT-ST DVDRW G2 3N and Mac OS X Install DVD.  How do I install the program on the hard drive?  This computer was given to me by a friend and I was trying to restore it to factory settings.  Thanks!!

    You want to boot from the Install DVD and install OSX on the Hitachi drive.
    Full instructions here:
    http://support.apple.com/kb/HT3910

  • Hi, I bought my Macbook in Nov 2008, Alumunium and now I am selling this to my friend how can i reset to factory setting without the CD

    How can i restore my macbook to the factory setting?? I am presenting it to my friend.

    since you are running mt lion on the mac you can boot to the recovery partition (restart holding down command+R keys)
    once booted there open the disk utility window and then on left side select the mac HD select the erase tab and make sure that next to format it says "mac OS extended journaled"
    click on the erase button
    once done close the disk utility window then click on the option to "install mac OS" and follow the prompts
    once the install is completed and the mac is restarted it will be like new and the setup assistant will open on startup

  • How can i do a factory reset in snow leopard without the disk to start off new without losing my other programs

    how can i do a factory reset on snow leopard without the disk to start off new without losing my programs?

    You can't. You will need a Snow Leopard disc. You can purchase replacements for your computer from Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.
    A "factory reset" means you erase the drive securely. All of your files will be removed permanently. I suggest you make a backup:
    Clone using Restore Option of Disk Utility
      1. Open Disk Utility in the Utilities folder.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Select the destination volume from the left side list and drag
           it to the Destination entry field.
      5. Select the source volume from the left side list and drag it to
          the Source entry field.
      6. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.

  • How do I reset or delete settings in the Messaging...

    How do I reset or delete settings in the Messaging section on a 6790?  I input something that I need to delete.

    You can only reset the password if you know the original. Apple did not make a back door to this as it would be  insecure.
    Why do you want to start again? If you just want to start again click create new keychain. Then you start from scratch and the old keychain is kept in ~/Library/keychains just incase you remember your password.
    PJRS

  • How can I wipe my hard drive and restore to factory settings without the use of the original OS CD?

    I have a 2010 MacBook and I need to wipe the hard drive and restore to factory settings.
    The problem is that even though I have the original disc, the CD drive has stopped functioning and will reject any disc put into it.
    Therefore, is there another method to do this without the CD?

    Not very easily.  To restore to factory software you need the original installation DVD (CDs).
    If you have another Mac which is the same make and model so that those installation DVD (CDs) would work, you can use a Firewire cable between the 2 Macs and then put your Mac to be reset into Target mode and use the other Mac to install the software.  However I suspect that is unlikely.

  • How can i reset my macbook pro without the disc?

    trying to reset a macbook pro to factory settings without a disc

    You can get a set of discs specific to your machine by calling Apple. Cost is about $20, I believe. Be sure and have your serial number handy.
    Then take a look at Thomas Reed's How to prepare your Mac for sale - that may not be exactly what you're doing but it will give your machine that factory-fresh feel.
    Good luck,
    Clinton

  • How can I reset my admin. password without the MAC OXS  reinstall, bought mine used and have no such disk

    Hi, how can I change my admin password without the reinstall of MAC OXS disk or whatever that is, I bought my macbook privately and cant update my adobe flash without the password which I have never set up. but anything I type in is wrong...... as a password.

    ok have read all relivant posts and have tried the restart command+R which does absolutely nothing. My Computer opens up as usual.
    I have found another response which suggests command+S and generate an entirely new admin. and password and you are not supposed to loose a single file.
    Has anyone done this and been successful? I have just installed a new hard drive in the last 3 months and don't want to do any damage.
    Hearing a success story would be nice.  Thanks

  • How can I reset my imac to factory settings without the ilife cd?

    I have an iMac that I bought in 2006. I recently purchased a macbook pro for college, so I thought it would be nice to give my old iMac to some family friends. However, I don't want them to have all of my information that's still on the computer. I have already backed up all of the files that I need, so I'm prepared to erase the hard drive. I've been reading online that you need certain things to do so: startup dvds and ilife dvd/cd/whatever. I have the first, but not the second. Is there a way to erase the HD without the ilife? Can I use a newer ilife dvd? Or is there an easier way to do all of this??

    Hi Jacob: There is no requirement of the iLife DVD to wipe the computer. If you have the original install DVD, that is all you need.
    Stedman

  • HT201365 how do i reset to factory settings on iPhone 4S?

    how can i dump my iphone and set to factory settings?   I did a sync with itunes and after i noticed my camera and siri are gone!   its a 4s so i really hate not having these two features,  the guy at apple store had never seen it before and found my back ups to be too late and already with this strange anomoly as part of my earliest saved backup.   dont have backup that is not flawed.  he said i can dump it and start again i guess.  got my pics saved now on my hp but how do i dump my phone back to original settings?

    Did you check Settings>General>Restrictions to be sure that Camera and Siri were both turned on?

  • How do I reset to factory settings on OS X 10.6.8 when install disc is 10.5.5?

    Hi, I'm ready to sell a MacBook Pro I bought off a while ago on eBay that came with OS X Snow Leopard. The install disc that came with it however only included OS X Leopard. My question is that how do I reset the computer back to its default setting (erase all personal data) but keep Snow Leopard. I really need the answer quick. Thank you.

    Prepare Your Mac for Sale
    Boot from the OS X Installer Disc One that came with the computer.  After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.  After DU loads select the startup volume from the left side list then click on the Erase tab.  Set the format type to Mac OS Extended (Journaled) then click on the Options button.  Select the one pass Zero Data option and click on the OK button.  Then click on the Erase button.
    Note: You can skip the Zero Data option if you are not concerned about removing sensitive personal data from the hard drive.  If you choose to skip this part of the process then it is possible for others to recover data from the hard drive.  The Zero Data procedure will prevent others from getting access to your personal information.
    This process will take 30 minutes to several hours depending upon the size of the hard drive.  After formatting has completed quit DU and return to the installer.  Now complete the OS X installation.  At the completion of the installation do not restart the computer.  Instead just shut it off.  The next user will be presented with the Setup Assistant when they turn on the computer just as it would if new out of the box.

  • How do you reset to factory settings

    reset to factory settings

    Restore as new: iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad or iTunes- Restoring iOS software.

  • Can I restore my iMac hard drive to factory settings without the install disc?

    I have an older iMac running iOS X 10.5.8. with a 2GHZ processor.  1GB DDR SDRAM with a Power PC G5 chip
    We want to restore the hard drive to original factory settings but don't have the OS X install disc.  I have been searching online to find a disc, and can purchase one, but I want to know if I can do this without the install disc?  We want to do this so I can give this computer to my nephew.  I have already backed up all data.
    Currently I have gotten as far as clicking on the "ERASE" tab in the disk utility, but the "Security Options" and "Erase" buttons are greyed out (cannot click on them).  According to the Disk Utility help, the buttons are greyed out because I must start up using another disc, such as the Mac OS X install disc. 
    In addition, I DO have the Mac OS X install for my 13" MacBook Pro.  Can I use this disc for the iMac?
    Bottom line, I want to know if there is a work-around without having to purchase another start-up disk.
    Thanks for your help.

    We want to restore the hard drive to original factory settings but don't have the OS X install disc.
    Why?  Erase everything that isn't yours.  Create a new id.  Delete old id.  Secure erase empty space on hd.
    Once done, make a backup of the hd since the hd will fail eventually/soon.
    Restore Tiger 10.4 & Leopard 10.5  DVDs may be available from Apple by calling  1(800) 275-2273. Have your serial number ready. Have your credit card ready too.  There may be a small fee.
    https://discussions.apple.com/thread/4720126?tstart=0  -- January 20,2013
    https://discussions.apple.com/message/24588313#24588313 -- January 22,2014

  • How can I reset an apple ID without the email or birthday?

    When I was younger my parents had an earthlink account, and I bought my first iPod mini, and signed up for an apple ID. Skip to years later that email account is long gone, and my mom uses the same apple ID to sign in to both her new iPhone and the iPhone that she passed on to me. Both phones are logged in to the same apple ID, which I cannot reset because I have no access to the email, and being my young self I didn't input the correct birthday so I can't even access my security questions. Where do I go from here? I can't sign out on either device to reset them, and I can't buy anything on the stores without the password from the account.

    If you have proof of purchase for the devices from an authorized source, Apple can remove the activation lock. If you don't, they are now bricks.
    And please don't start about the injustice of it all. you lied about your identity, making it impossible to prove you own the account. Falsifying the information was a violation of the Terms of Service for an Apple ID and iCloud, and if you were under 13, falsifying your birthdate so that you could create an account was a crime.

Maybe you are looking for

  • Trouble with first progråµ

    I'm having trouble with my simple calculator, which is similar to the calculator in "cocoa programming for dummies". http://public.me.com/schoolkid144 its firstproject.zip The trouble is that when I get the value of the two text fields, it always ret

  • What do I need to read a VTS dvd?

    My sister gave me a disk that has a VTS/VOB format on it. what can I do for my macbook pro to allow it to read it?

  • Grand Total with few NULL values in column.

    Hi All, In my requirement, I have few null values in the column and I have to show those null values as it is( can't use IfNull function). Can I able to grand total in such scenerio..? I am using OBIEE 11.1.1.3 Thanks, Archie

  • Mounting Information AP-Bracket-2 and Air-Ant-2566P4W-R

    Hello, for mounting preparation I need information about hole-size and hole pitch (position / distance between holes) for AP-Bracket-2 and ANT-2566P4W. I can't find this information (installation guides). Regards Sven

  • [feature request] Editing base states in design mode

    Please tell me the the new Flash Builder Burrito will have the ability to edit the base state while in design mode, or at least have the ability to "make same in all states" like in Flash Catalyst. I really loved the old method where you could make a