How do I resize an image in Lightroom?

Hi everyone, was wondering if someone can help me as am trying to resize and image in lightroom and cannot find where to do it.. please help. thanks alexandra

The Alamy upsizing is nonsense but you can actually use Lightroom export. You only have to use differnet numbers (presets) for different aspect ratios. These are the rough numbers for the aspect ratios I use:
Assuming they want 16x2^20 (16.777.216) pixels rather than 16x10^6 (16.000.000) pixels, the image dimension to upsize with LR are the following:
Aspect ratio 2:3 (portrait or landscape)
~ 5017 x 5017 pixels
Aspect ratio 1:1 (square)
~ 4096 x 4096 pixels
Aspect ratio 16:9 (portrait or landscape)
~ 5462 x 5462 pixels
Aspect ratio 4:3 (portrait or landscape)
~ 4730 x 4730 pixels
You can store those in presets, use sort to sort the images by aspect ratio and export one set after the other with different presets.

Similar Messages

  • How do I resize an image within a drop zone (not the drop zone itself) in motion 5?

    How do I resize an image within a drop zone (not the drop zone itself) in motion 5?

    I think others would be able to help if you describe a little more why you'd like to do this. Given that drop zones are a way of passing images into Motion that you want to manipulate, resizing a drop zone is the equivalent of resizing the image.
    If you're having a problem with an image from Final Cut being too big or too small, select the Drop Zone in the inspector and make sure the Fit parameter is set to 'Fit' - 'Center' will result in images dropped not being scaled to fit the Drop Zone. 'Stretch' will force the dropped image to fill the space defined by the drop zone,
    If the image is already cropped and scaled up in Final Cut Pro, that is the information that Motion gets - you can't scale down the image to see more of the edges that have been cropped off.
    If you want more than one copy of the image passed via the drop zone, use Make Clone Layer from the Object menu.

  • Just set up lightroom 5 and imported images with sequence number but wanted image number.  How do I renumber all images in lightroom with an image number?

    How do I renumber all images in lightroom with an image number?

    Try line-height: 19px; and display: block; (as shown) on the following css seletor :
    ul.MenuBarHorizontal a {
         font-family: Lucida Sans Unicode, Lucida Grande, sans-serif;
         color: #CC6;
         text-decoration: none;
         padding-top: 10px;
         padding-right: 12px;
         padding-bottom: 10px;
         padding-left: 12px;
         line-height: 19px;
         display: block;
    Normally setting a height on a container which you have no control over is not a good idea. The text can be enlarged and that will throw everything off. The best way is to set no heights at all but use padding and make sure your background image is flexible enough to accommodate the text enlargement.
    ul.MenuBarHorizontal a {
          padding: 12px 12px;
         display: block;

  • How can I resize an image without losing resolution or using the crop tool? I am using Photoshop Elements 13 on a PC.

    How can I resize an image without losing resolution or using the crop tool? I am using Photoshop Elements 13 on a PC.

    Hi Peru Bob,
    I've tried two images, the results were:
    Image 1
    Jpg, original file size 923KB, dimensions 848px x 279px.
    After resizing to 848px x 180px with 72dpi, the file size decreased to 164KB.
    Image 2
    Jpg, original file size 809KB, dimensions 1200px x 1800px.
    After resizing to 668px x 722px with 72dpi, the file size decreased to 307KB.
    So, there seems to be a fair file size loss - is this to be expected?

  • How can I resize my image?

    How can I resize my image to be smaller?

    You asked about changing the file size
    To change the size in Pixels, you use the options at Size in the export dialogue
    Regards
    TD

  • Photoshop CC: Have a template that I moved image into.  Image is too small.  How do I resize the image while in the template?  Or must I go to original image file and resize there again and again until I get the right fit?

    I have a template that I am able to plug different pictures into at different times.  The problem is that when I plug an image into that template, I find that the image is either too big or too small.  Is there a way to plug the image into the template and resize the image (and not the template itself) OR will I have to go to the file with the original image and resize it there and then try to plug it in to the template to see if it fits------and if it does not fit, go back to the original file with the image and resize it again and see if that fits---and so on and so on...........?  I have tried the" image size" option but it's hit or miss------mostly miss!
    Thanks!

    Read up on Smart Objects. It looks like you have no idea as to how to create and use them.
    Jut create a Smart Object from the layer containing whatever it image it is that you are "plugging into your template".  But you do need to learn the application at its most basic levels.
    Photoshop is a professional level application that makes no apologies for its very long and steep learning curve.  You cannot learn Photoshop in a forum, one question at a time.
    Or is it possible that you don't even have Photoshop proper but the stripped-down Photoshop Elements?"
    If the latter is the case, you're in the wrong forum.  This is not the Elements forum.
    Here's the link to the forum you would want if you're working in Elements.:
    https://forums.adobe.com/community/photoshop_elements/content
    If you do have Photoshop proper, please provide the exact version number of that application and of your OS.
    (edited for clarification)

  • How do you resize a image/picture and save it?

    Hello, I know how to resize a image. But how do I save a new image/pictures has Jpeg with new size properties?

    Use File>Save As or File>Save for web. Either of these will create a new document as long as the name is different or is in another folder.

  • How to mass-delete unrated images in Lightroom?

    Hi everyone and happy Memorial Day.
    I wonder if someone can help me with a Lightroom question.
    How can I erase all of my un-flagged images? I would like to quickly flag or otherwise mark all the keepers and maybe keepers and then delete all the rest. I feel like there must be a way because having to hit each image with an "x" to reject it seems like too big a pain for there not to be a shortcut.
    I recall someone on a forum told me how to delete all rejected images at once by hitting CTRL-BACKSPACE and that has saved me hours of wasted time over the last couple of years. I hope someone can suggest a similar shortcut for deleting all unrated images, keeping my flagged ones safe.
    Scott
    Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
    Why do so many people say "fer-tographer"? Do they take "fertographs"?

    "A related note: who worries the next Adobe Lightroom will go to the "Creative Cloud" ."
    I have been dealing with Adobe for 40+ years and one thing for sure, you never know.  I am a beta tester for them. They don't tell us much either.  I am going to "guess", likely.  Maybe 60/40 to go cloud.  Make sure you keep your copy up-to-date!
    Photoshop and Lightroom plus the rest of CS are mature products.  Meaning the market is saturated.  The only new revenue is the few new photographers that enter the field.  This leaves Adobe to just do upgrades to make a profit.  Is the upgrade worth it?  Every 18 months or 2 years?   To some, yes but to others no.  Makes future predictions of revenue difficult.  The CC format guarantees a constant revenue stream, forever.  Adobe's profits are very high right now and their stock is up.  So your guess is a s good as mine.
    You are also likely to see other mature software go the subscription route.  Microsoft Office 
    There is also the misguided theory that bootleging would be better controlled but that hasn't happened.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

  • How do I rotate an image in Lightroom Mobile for the iPhone?

    Hi,
    Maybe I am missing something obvious, but I can't figure out how to rotate any images in Lightroom Mobile for the iPhone. The documentation is for the iPad and shows a rotate control on the right hand side of the screen, but no such control is showing up on the phone. I tried various numbers of fingers to just spin the image, but no luck. Can someone please let me know how this is supposed to work?
    Thanks!

    Hey, thanks!
    I had tried forever to figure that out. I could rotate up to about 45 degrees or so, but even that was hard to control.
    Thanks for the help.

  • How can to resize an image uploaded in to the smart image

    Hi
        I have an image uploaded into the smartimage from the local file system. How can i resize this file or create a rendition for this image?
    Thanks
    Veena

    Hi
       I got a reference for the same question from Stack Overflow http://stackoverflow.com/questions/14726485/resize-an-image-resource-in-cq5/16728970#16728 970
    I tried the same method
    Resource resourceNew = resource.getResourceResolver().getResource(img.getFileReference());
        Asset asset = resourceNew.adaptTo(Asset.class);
        log.error("asset ****" + asset);
        Layer layer = new Layer(asset.getOriginal().getStream());
        layer.resize(200, 200);
        log.error("layer ****" + layer);
                            Image image = new Image(resource);
        String mimeType = image.getMimeType();
        ByteArrayOutputStream bout = null;
        ByteArrayInputStream bin = null;
        try {
            bout = new ByteArrayOutputStream(2048);
            layer.write(mimeType, 1, bout);
            bin = new ByteArrayInputStream(bout.toByteArray());
            asset.addRendition("resizedImage", bin, mimeType);
    log.error("asset Bin" + asset);
        } finally {
            // close streams ...              
    Where img is my Image object and I was able to create a rendition in the dam.
    But the rendition I am getting is in File format. Is there a way by which i can change it to png format??? any Help will be appreciable..
    Thanks
    Veena

  • How can i resize a image with changing good quality?

    i do not know how to resize a image and display to let the user view immediately.
    I hope somebody can teach me and show the completed coding

    Look at BufferedImage getScaledInstance

  • I am trying to send a file for a contest and my image is 2.7MB and they only want it 2MB how can I resize my image to fit ?????

    i am trying to send a picture on a pastel site for a contest and my image is 2.7MB........ they want it 2MB...how can I resize my photo to 2MB???? Pat....

    select the photo and export it (file menu ==> export) - there are several options for reducing the size including quality and maximum pixel dimension
    LN

  • How can I resize an image in the header?

    I have uploaded my organization's logo into our document, but it is out of proportion to the rest of the document. I've delted it and uploaded smaller versions of the logo and it is still too big. How can I format the image in the header so that it is more reasonably sized?

    Thanks. The triangle was buried in the image. If you hadn’t told me where to look, I would never have found it!
    Michelle
    Michelle Lancto
    Jewish Endowment Foundation
    a division of the Jewish Federation of Western Massachusetts
    Phone: 413-732-9994                Fax: 413-737-4348
    <mailto:[email protected]> [email protected]
    <http://www.jefwesternmass.org/> www.jefwesternmass.org 
    <http://www.jewishwesternmass.org/> www.jewishwesternmass.org
    JEF_Logos_1101_JFWM for email LOW RES
    Confidentiality Notice
    The information contained in this message and or attachments is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material.  Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any system and destroy any copies.

  • How do I resize an image in Photoshop CS2?

    Hi! I'm trying to resize an image in Photoshop Cs2 with OUT making it grainy or blurred. Please help!? I know there's some key you can hold down while dragging with the mouse but eh I forgot it! o_0 please help!

    Jody...
    If you have a vector version of the logo, the smartest thing is to resize it as vectors to the size you want, and
    then
    rasterize it.
    Case in point:
    I was trying to make a 16px × 16px favicon for my blogspot site, and the only way I could get the details to appear nice and clean was to create the entire thing from shape layers, transform them all in one go to fit inside a 16px × 16px box I defined using guidelines, and THEN rasterize it using the Save For Web dialogue.

  • How can I resize an image in Preview?

    There has been lots of discussion about Preview but non really answers my question. If I resize an image and duplicate it the duplicate over rides the settings of the original - so now I have 2 images the same size which is not what I want. I want the new image smaller but to keep the original the same size as before resizing. Versions seem to do the same thing, and as far as I can make out so does export. I know you can revert one of the duplicate images to get it back to the original size but it is a rather convoluted process.
    I know there are very clever people here so perhaps one of you can give me a work flow to do what I require. Thanks in advance.

    Of course, you can save some steps by duplicating the original file first, and then resize the copy.
    rolando

Maybe you are looking for

  • Multiple calls to ad_parallel_updates_pkg.initialize_rowid_range

    Hello, Can I call ad_parallel_updates_pkg.initialize_rowid_range with 5 different tables in the same script as in the below script? ftp://bugftp.us.oracle.com/upload/bug_12/bug12928204/c1279530_final.sql When I'm trying to test the script and extract

  • PNG file displays white instead of clear

    This is strange that png file that has an clear spot (alpha) would not display it in FCP 5.14. It shows white. If I erase portion of the file with an eraser in Photoshop then it will show normal clear part of the file. Here is the file if someone can

  • Why Google browser bar not allowed in Firefox 5

    Why cannot i Insatall Google task bar

  • Ppt files not opening from server

    Hello all, Strange things are happening; A MacBook (leopard) places a PowerPoint (ppt) file on the server. It has been made with Microsoft office 2008 and saved as 97-2004 compatibility because there are some co-workers who are not entirely up-to-dat

  • Number after computer name

    I am using Apple Remote Desktop on a Mac Pro to administer a Macbook Air. When the Air joins the network or wakes up from sleep, ARD sees it as a new machine with the same name, so it adds a serial number in parentheses to the name (e.g. MyMbAir beco