How do I resize images so they're 48-52 mb file range at 300 ppi?

How do I resize images so they're 48-52 mb file range at 300 ppi? I checked the Aperture On-Line Help Manual but couldn't find the answer.

You would export them from Aperture to do this, using tiffs to get that file size.
Regards
TD

Similar Messages

How do I resize image?

How do I resize image from 720 to 1080 in after effects?

Have you tried using the Scale property? Click the arrow to the left of a layer's name to expand its properties. Alternatively you can click on the layer in the timeline and press the "s" key to expand the Scale property for that layer. By default, scaling retains the original proportions; if you wish to disable this and scale something out or proportion then uncheck the little "constrain proportions" icon in the Scale property.
An even easier way is to simply click on a layer in the composition view and drag the small boxes at the edges of the layer.

How to proper resize images and videos at runtime without losing quality?

Hi guys. I need a bit of help here.
I've built a flash site in which i want to resize a movie to the stage. I do it by keeping the proportion, thus i only resize the width and then i resize the height acordingly to the new width but keeping the proportion.
The problem is that my film still looks "pixeled".
I found a website on which the stage resizes dinamically with the movie and the background images without either of them losing quality. Till now i knew that resizing images or videos in flash at authoring or runtime produces pixeled results.
This is the website: http://kampanjeweb.apt.no/jotun/romforrom/. Can someone tell me how do they do it without losing quality? just make the browser windowed and resize the margins to see the effect.
Thanks.

Hello, Venian.
About the video, you could try setting the flash.media.Video's smoothing property to TRUE. This should keep a quality, but you can do nothing if the video has a poor quality. You need a great video.
About the images, you you need to redraw the image each time you resize it. To achieve it, use a combination of Bitmap, BitmapData and Matrix classes. Any doubt, just call again. Here is a simple example:
var scale:Number = .5;
var highQualitySourceImage:Bitmap = ...your image...;
var scaleMatrix:Matrix = new Matrix();
scaleMatrix.scale(scale, scale);
var bitmapData:BitmapData = new BitmapData( scale*highQualitySourceImage.width, scale*highQualitySourceImage.height);
bitmapData.draw(highQualitySourceImage, scaleMatrix);
var finalBitmap:Bitmap = new Bitmap(bitmapData);
addChild( finalBitmap );
Cheers,
CaioToOn!

How to add multiple images to a JLabel from the jar file

I want to add multiple images in a JLabel but the icon property only allows me to add one. I thought I could use html rendering to add the images I need by using the <img> tab, but I need to use a URL that points to the image.
How do I point to an image inside the jar file? If I can't, is there another way to show multiple images in a JLabel from the jar file?

Thanks, it works perfectly. It's a really smart way of fixing the problem too :)
I also found your toggle button icon classes which is something I've also had a problem with.
Thanks.

Labview pda module: how can I resize image dynamically in an application?

Hello every one,
I am currently working on the development of an application on a PDA (brand Nomad) and whose OS is Windows Mobile. So I am using the PDA module of Labview 8.6.My problem is the following one: in my application I would like to be able to load images (thanks to their path) in pictures indicators. I load images with the labview “function PDA Image File Load.vi” and then my problem is that images don’t fit with the size of the indicator, and so I am only able to see the left top corner of the image…Of course, I would like to see the entire picture, but I don’t know how I can modify or resize a picture with the PDA Module, where most of the property nodes (zoom factor, scrollbars…for picures) are not available.Has someone ever faced and fixed that problem?? Any help would be really appreciated!! PS: Attached is one part of my application!
Attachments:
cameracapture.vi ‏21 KB

Hi,
Indeed, like Romain D. said you have some interesting discussions where you can find some customer's experience like yours :
How Do I Put A Picture or Image On My LabVIEW PDA for Palm Front Panel?
How to Resize a picture
Scale image on PDA (Pocket PC)
Placing an image or picture on Labview PDA pocket PC
Picture and PDA
PDA Picture Control Scrollbars
Let me know what happens.
Regards,
Steve M.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Vidéo-t'chats de l'été : présentations techniques et ingénieurs pour répondre à vos questions

How to achieve resize image effect

Can anyone tell me how to achieve this effect with image resizing in RH, as the images do at the link below? I cannot find the method in the RH Help.
http://help.adobe.com/en_US/robohelp/robohtml/WS1b49059a33f7772644666e3b1373013a398-8000.h tml

Hi there
Sorry, but RoboHelp does not offer a method to achieve this. Unfortunately that's a huge hint that Adobe isn't using RoboHelp to develop those pages.
If that's the effect you are after, you will need to roll your own with some JavaScript that does a hide and show on text and images.
One way you might achieve it with a single image would be to insert the image *TWICE* on the page. Then scale one pretty small. Take the full sized image and tuck it inside a Dynamic HTML drop-down. The net effect would be that the user would click to see the full sized image (revealing the DHTML drop-down) and the smaller version would be "pushed" farther down the page.
Cheers... Rick

How can I resize image in iPhoto?

Question just like the topic states. Also when editing an image; contrast/brightness etc - how can I make sure that the original stays intact?

It depends on what you want to do with the photo. If you're resizing for printing just go into the Edit mode and crop using the appropriate Constrain selection. iPhoto will automatically save a copy of the original file so you can Revert to Original any time you'd like. If you want to resize for emailing just click on the Mail button and you'll be given the opportunity to select the size you want to sen with the email. The original is not changed in any way.
Any edit of a photo, crop, brightness, redeye, etc., will cause iPhoto to save a copy of the original file as I stated above.
Hope this has been of some help. Good luck.
OT

How do I resize images?

As juvenile as it sounds, I'm trying to upload images onto my profile at Myspace.com. I cannot figure out how to resize these mammoth 11-12MB images to under 600K. Any help would be greatly appretiated.
Oh....Macs rule!
MacMini Mac OS X (10.4.4)

Hi notslim99,
iPhoto has no resize within it's editing options. iPhoto does give you the option to resize your images when you export them.
Select the images in iPhoto
Go to share>export in the menu bar.
Input your image dimensions and naming scheme, then export to the desktop.
Use the photos on the desktop to upload to your web space. You can delete the photos you exported after you have uploaded them.

How to batch resize images in Photoshop? [was:request information and courtesy]

Good evening, my name is gianluca. Let me ask you this information and courtesy : you could write me step by step procedures (or email me the link to the instructions in Italian or alternatively in English) to be followed in Photoshop to resize in one fell swoop with the same height and width in cm all jpg file (containing passport photos) present within the same folder, thus avoiding open every single jpg file and resize it?
I hope for your help
Best Regards

gianlu1874 wrote:
Good evening, my name is gianluca. Let me ask you this information and courtesy : you could write me step by step procedures (or email me the link to the instructions in Italian or alternatively in English) to be followed in Photoshop to resize in one fell swoop with the same height and width in cm all jpg file (containing passport photos) present within the same folder, thus avoiding open every single jpg file and resize it?
I hope for your help
Best Regards
A process can be automated in Photoshop in different ways using one of Photoshop batching feature ther are more then one and it can be done by other image processing programs. However in all cases your image files will need to to opened decoded into an image processed to produce the images files you want and output files saved.
It not possible to give you a step by step for you left out much needed infomation. Like will all files being process have the same aspect ratio and if its the same aspect ratio as your desired passport images. Passport images should not be distorted. If Aspect ratios differ will a centered crop be OK. etc

How to create resized image instance from an existing image

It looks like the image class does not provide a possibility to create a resized instance. Image#impl_getURL() would be good enough to create a resized instance of an existing image - but could be removed in a future release. So what's the preferred way if I have an image object only - there's no information about the based image resource.

You can resize an image on loading using one of the constructors that takes requestedWidth and requestedHeight parameters. This is useful for preserving memory when (for example) needing to display a large number of thumbnails.
Additionally, the ImageView class defines resizing functionality for the view of an Image. So you can load the full Image, then display one or more resized versions in ImageView(s).
If you need, you can retrieve an Image object representing the ImageView by calling snapshot(...) on the ImageView; for most use cases the ImageView itself will be all you need.

How to disable resizing images and tables in designMode?

In own wysiwyg editor this function must be disabled. How make it disabled?

A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the MozillaZine forum site in order to post at that forum.

How can I save images and text data to the same file?

I have been looking at ways to do this for a while. My main VI saves the raw data to a text file which the users then import to Excel and plot. I am trying to simplify this process and have been looking at ways to accomplish this task. I want to be able to save the raw data to a file and then save the Labview graph as well. This will eliminate the tedious task of importing the raw data into Excel and plotting it. I can save the raw data to its own file and I can use the Get Image method for the graph and save it to its own file. I am currently using the .png format. Is there a way of saving both to the same file ie, importing the image into Excel or Word etc. Before I go off doing a science project I wanted to see if anyone else had experience completing this task and had any recommendations. Thanks in advance for any help.

well ther are a couple of ways. You could use the standard report generation VI's and make a complete report with the image of the graph embedded into the report with the raw data or you could use activeX and control excel thru LV and put the raw data into excel directly and have excel graph the data without any user interaction. I have posted a slew of VI's on the excel board if you do not have the report generation toolkit. If you could tell me which way you want to go I could possibly send you an example.
For more information and some sample VI's and tool kits, you can go to the excel board
Joe.
"NOTHING IS EVER EASY"

Can someone please tell me how to save an image from Photoshop CS4 as a RTL file?

I recently bought a VuTek Printer and I have to have a RTL file that is from Photoshop, does this have anything to do with PostScript?

Are you sure about that .RTL file extension?
All that I can find (quick search on Google), indicates that it is a Borland (software) RunTime Library file, in a TXT format.
Are there any details in the printer's manual about what it needs, with an explanation of the .RTL format?
Good luck,
Hunt

Resizing Images for a Beginner

When I teach students who are just learning to use a digital camera, one of their first questions is: How can I make my images smaller to attach to an email?
At this early stage, I want something easy. On Windows OS, it is just a right/click away when they get a resize image option. Is there a similarly easy way for my Mac students to accomplish this feat before they get further into their learning?
I tried opening the image in Preview and using the pull down menu when saving it as a jpeg, but the slider has to go all the way to the lowest quality before an image even gets to 500k.
Thanks for your input.
Mary Lou

Mary Frost wrote:
I am hoping that there is a method which doesn't require that each image be opened in software and then resized and resaved. Eventually, these adults will be using Photoshop Elements and will learn how to properly resize images.
I wish there were as easy a method on Mac as on Windows.
Will all versions of the Mac OS include some version of Preview?
Mary Lou
As far as I know yes. The latest OS has it as well as Mountain Lion which is what I have.

How to make the images show up on a linked file in Muse?

I am wondering how to get my images to show up on the linked files in Muse. Basically, in Muse, I have a page that links to other pages I designed in Dreamweaver. I put the images in the image folder and when I upload the site, the page links to the Dreamweaver page ok but the images are missing. This is a vital part of the site. Any suggestions?

If you made the pages with Dreamweaver then they should be on your system some place and you could make a "dreamweaver" folder inside your Muse site and upload the pages to that folder using the upload files option... see this thread talks about sound files but almost any file can be imported to muse
I need a recommendation for a slick way to embed audio
Another option is to link across to an online resource using the built in muse html editor but that has pit falls because once you link yourself outside the site you also lose some control of the content;
For an example of this have a look at an old demo page I made http://chec-garry2.businesscatalyst.com/index.html
When you click on the Brahminy Kite bird you are looking at what used to be called an Iframe but the problem of control is highlighted when you click the Blue Wren and sometimes get pop up adds… I could import the Blue Wren page into my Muse site to fix this issue and in your case that’s a good option but I didn’t because I don’t have copyright over that pages contents and didn’t want to steal someone else’s work.
p.s. if you have got a demo of the website/ pages online someplace that would help us see your problem.

How do I resize images so they're 48-52 mb file range at 300 ppi?

Similar Messages

Maybe you are looking for