How do I resolve error 1310 while installing crystal report version for visual studio 2010.

How do I resolve error 1310. I try to install crystal version for visual studio 2010, but I got this error message. Error 1310. Error writing to file. mcf80.dll.verify that you have access to that directory. My pc is window 7 (32 bit). Please I need help
urgently to work with this program in my system successfully. Please help.

Hello Dorohidea,
Do you mean that when you install crystal report in virtual studio 2010, you receive the error message about error 1310?
Please take a look at the following KB.
Support for Crystal Reports for Visual Studio
https://support.microsoft.com/kb/317789/en-us
In Visual Studio 2010, to create a Crystal Reports project or Web site or to import existing projects or Web sites that were created by using older versions of Visual Studio or Crystal Reports, you must first install a version of Crystal Reports that is
compatible with Visual Studio 2010.
For more information about how to use Crystal Reports in Visual Studio 2010, visit the following SAP Crystal Reports website:
http://www.sap.com/crystalreports/vs2010
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

Crystal Reports Version for Visual Studio 2010 Fails to Install

Hi -
I am trying to install the CR redistribution package for .Net 4. When I run CRRuntime_32bit_13_0.msi I get an Error 1904 when it tries to register the commonobjmodel.dll. If I manually register the dll using regsvr32 I get the following message:
"The module 'commonobjmodel.dll' failed to load. Make sure the binary is stored
at the specified path or debug it to check for problems with the binary or dependent .DLL files."
The dll does exist and is in the correct directory. Is there another installer I should be using?
Thanks.
- Andrew

Entering "1904 crystal" into the search box at the top right corner of this page, gives the following KB:
[1534393 - "Error 1904. Module C:Program FilesSAP BusinessObjects..dtsagent.dll failed to register ..." when installing Crystal Reports for Visual Studio 2010 MSI runtime|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333334333333393333%7D.do].
See if that helps. If not, there are other KBs that will come up for CRVS2010...
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

An error in Crystal Reports Basic for Visual Studio 2008

Greetings from Peru,
We have a problem with one of the Crystal Reports products weu2019d like you to help us with. We work with Crystal Reports Basic for Visual Studio 2008.
The error weu2019ve detected is in one of our systemu2019s reports; this report shows data inside frames. When the content to show is larger (in height) than the space left in the page, the container object of the report makes a line break keeping the title and the frame empty at the end of that page, but the information is shown in the next page. What we need is that not empty frame is displayed.
Weu2019ve tried to solve this problem by adjusting the report in different ways (by programming coding), but unfortunately this problem is related to how much data is displayed, because if this data fit in the space left in the page, the line break would not occurs and the data is shown at the end of the same page.
We hope you can help us with this issue. I look forward to your comments.

All I can think of is trying CR 2008 (v.12.x). You can obtain an eval copy from here:
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Error 1305 while installing Crystal Reports 2008, JavaSDK

While installing Crystal Reports from the original media on a new Lenovo Thinkpad running Windows XP Pro SP3 I get the following error while installing:
Error 1305: Error reading from File: c:\program files\Business Objects\javasdk\jre\audio\soundbank.gm. Verify that the file exists and that you can access it.
I have the option to retry or cancel, obviously cancel exits the installer. Retry just fails again. I have tried to access the file (which does exist) and I cannot because it is in use. I used Sysinternals process explorer to find out what has the file in use and it is msiexec.exe which is the Microsoft Installer service which is running in order to install CR2008.
I have tried restarting, setting permissions on the file and folder, uninstalling and reinstalling Java VM from Sun. I even tried killing msiexec (which killed the install). I even tried taking out all reference to java in a custom install.
I am at a loss on what to do next. Any help would be appreciated.
-Michael

I found that if I installed it from a copied local directory instead of the CD Rom that it worked

CRVS2010 Beta - Unable to Install CR Beta 2 for Visual Studio 2010.

I am unable to install Crystal Reports for VS2010. "Failed to update cache for execution."
There is a similar thread (locked) with this problem. (CRVS2010 beta 2 - error during install)
I have tried everything from this tread, and everything else I can think of. I am out of options.
I appreciate any help.
Thanks,
MF
OS: Windows XP SP(3).
Running on local drive with Administrator ID.
(Tail of SETUPENGINE.LOG)
17:27:38.765 Cache: DU files cached in: C:\Program Files\SAP BusinessObjects\InstallData\InstallCache\tp.rosette-4.0-core-32\0\
17:27:38.796 Cache: copying files from: C:\cr4vs2010\dunit\tp.sap.ncs-4.0-core-32\
17:27:38.843 Cache: DU files cached in: C:\Program Files\SAP BusinessObjects\InstallData\InstallCache\tp.sap.ncs-4.0-core-32\0\
17:27:38.890 Cache: copying files from: C:\cr4vs2010\dunit\tp.curl.cpp-4.0-core-32\
17:27:38.984 Cache: DU files cached in: C:\Program Files\SAP BusinessObjects\InstallData\InstallCache\tp.curl.cpp-4.0-core-32\0\
17:27:39.031 Cache: copying files from: C:\cr4vs2010\dunit\tp.sap.nwrfc-4.0-core-32\
17:27:39.546 Cache: DU files cached in: C:\Program Files\SAP BusinessObjects\InstallData\InstallCache\tp.sap.nwrfc-4.0-core-32\0\
17:27:39.625 Cache: copying files from: C:\cr4vs2010\dunit\tp.ooc.dotnet-4.0-core-32\
17:27:39.796 Cache: DU files cached in: C:\Program Files\SAP BusinessObjects\InstallData\InstallCache\tp.ooc.dotnet-4.0-core-32\0\
17:27:39.937 Cache: copying files from: C:\cr4vs2010\dunit\tp.pkware.cpp-4.0-core-32\
17:27:40.140 Cache: DU files cached in: C:\Program Files\SAP BusinessObjects\InstallData\InstallCache\tp.pkware.cpp-4.0-core-32\0\
17:27:40.203 Cache: copying files from: C:\cr4vs2010\dunit\tp.rsa.crypto-4.0-core-32\
17:27:40.453 Cache: DU files cached in: C:\Program Files\SAP BusinessObjects\InstallData\InstallCache\tp.rsa.crypto-4.0-core-32\0\
17:27:40.640 Cache: copying files from: C:\cr4vs2010\dunit\tools.srvtools-4.0-core-32\
17:27:40.765 Cache: DU files cached in: C:\Program Files\SAP BusinessObjects\InstallData\InstallCache\tools.srvtools-4.0-core-32\0\
17:27:40.812 Cache: copying files from: C:\cr4vs2010\dunit\foundation.jdsr-4.0-core-nu\
17:27:40.906 Cache: DU files cached in: C:\Program Files\SAP BusinessObjects\InstallData\InstallCache\foundation.jdsr-4.0-core-nu\0\
17:27:40.921 Cache: copying files from: C:\cr4vs2010\dunit\tp.azalea.fonts-4.0-core-32\
17:27:40.953 Cache: DU files cached in: C:\Program Files\SAP BusinessObjects\InstallData\InstallCache\tp.azalea.fonts-4.0-core-32\0\
17:27:40.968 Cache: copying files from: C:\cr4vs2010\dunit\tp.external.icu-4.0-core-32\
17:27:41.968 Error: Could not move temp dest folder to dest folder.
17:27:42.015 Error: Temp dest folder: C:\Program Files\SAP BusinessObjects\InstallData\tmp\tp.external.icu-4.0-core-32
17:27:42.078 Error: Dest folder: C:\Program Files\SAP BusinessObjects\InstallData\InstallCache\tp.external.icu-4.0-core-32\0\
17:27:42.109 Error: Cache: error copying files to cache from: C:\cr4vs2010\dunit\tp.external.icu-4.0-core-32\ to: C:\Program Files\SAP BusinessObjects\InstallData\InstallCache\tp.external.icu-4.0-core-32\0\
17:27:42.156 Error: CacheDUs - failed to cache DUs.
17:27:42.171 Error: Failed to update cache for execution. Program will exit.
(SETUPEXE.LOG)
17:25:18 Unable to open file :c:\Temp\2010.10.23.17.25.18\setupexe.log
17:25:18 Welcome to setup.exe!
17:25:18 Launching SetupEngine.exe: "C:\cr4vs2010\setup.engine\SetupEngine.exe"
17:25:18 SetupEngine.exe command line: -engine "C:\cr4vs2010\setup.engine
" -bootstrapper "C:\cr4vs2010
" -l "c:\Temp\2010.10.23.17.25.18"

Hi MF,
I had a problem with changing my default temp folders installing another third party program, not any CR stuff.
I changed my temp folders back to the defaults and then it worked. I tried changing the permissions for all users on c:\temp and c:\tmp but that didn't help either for the other program.
Only way it would work was to use the default temp folder structure.
Try changing yours back to c:\User\appdata\local\temp
Clear the temp folder out first and try again.
Something, not sure if it was Windows or anti-virus or the firewall was blocking access. Odd that it gets part way so likely some third party dependency on that file doesn't like or get to your c:\temp folder.
Thanks
Don

Error when running the Crystal Report 9.1 (visual studio 2003) in the deployed server

Hello,
1) I am suddenly getting an error message ‘Load Report failed’ in a production server (where the VS2003 application is deployed) when the Crystal Report is executed. This has happened maybe because of the Windows/Crystal Report Updates!
I am able to see the same report perfectly fine in the development computer using VS 2003.
I am using the 9.1 version which is part of the Visual Studio 2003.
The event logs show 'Either the keycode library is not registered or it cannot be loaded ...EventID=10029'. See attached screen shot.
Please help?
2) Since I was getting a registration suggestion window for using Crystal Reports, I registered twice using different email address and it said that it will send me the KeyCode for the Crystal report but after successful registration I never got any keycode but just an email acknowledging the Registration.
I believe the KeyCode is required to use it in the server to execute/run a report.
Can SAP representative email the keycode to my gmail account?
My product key is:
Please help to resolve both my problems
Thanks in advance,
Sanjay Chudasama

If I memory servers, you have to open the Crystal_Regwiz2003.msm in the .NET deployment project. One of the properties of the msm was Keycode (or similar). You entered the keycode here. To find your keycode; in VS2003 IDE, go to the Help | About screen. You will see one of the installed components as Crystal Reports and the keycode will be on the right of that. Copy the keycode from here, paste in the above.
For more details see the article Crystal Reports and Visual Studio .NET - Application Deployment.
- Ludek
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Share Your Knowledge in SCN Topic Spaces

Error occurred while installing Crystal report CRforVS13_0_9

When installing on Windows 8.1 operating system 64-bit or Windows 7 32-bit errors were. I tried downloading 2 times the original are the same. Acceptance is the first stop next time choose reinstall it successfully.
Thank you for your support.

See if this KB helps,
http://search.sap.com/notes?id=0001864395&boj=/sap/bc/bsp/spn/scn_bosap/notes.do?access=69765F6D6F64653D3939382669765F7361706E6F7465735F6E756D6265723D30303031383634333935
-Bhushan

CRVS2010 Beta - How do you hide the Group Tree for Visual Studio 2010

Would anyone know how to hide the group tree in the Crystal Reports viewer for Visual Studio 2010. I have tried
DisplayGroupTree="False" and found the property doesn't exist in the new version for VS 2010. I have search in the designer options and found nothing. Note this report is for ASP.net.
Thanks
Dave.
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Sep 15, 2010 8:55 AM

A simple search using the search box in the top right corner of this web page would have come up with the following KBase as one of the 1st - if not the 1st hit (for once, we beat Google ).
[1183704 - How to display or hide the Group Tree in CrystalReportViewer control through code in Crystal Reports 2008|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133383333333733303334%7D.do]
- Ludek

Javascript - Object required error for visual studio 2010

Hi - I have downloaded the crystal report RTM for visual studio 2010.
My App server is windows 2008.
We are using crystal reports as part of CRM application
I am getting javascript error 'Object Required' at the following line:
The debugger after the error message refers to this:
bobj.crv.stateManager.setComponentState('ctl00_ContentPlaceHolder2_CrystalReportViewer1__UI',eval('('document.getElementById('__CRYSTALSTATEctl00$ContentPlaceHolder2$CrystalReportViewer1').value')'));
The website has all the required aspnet_client files and have made sure the application is able to load them.
When tried with a new sample solution the reports work.
Please help. I need to make the crystal reports work with the CRM solution...

I am assuming this is happening after you have deployed your app and that the app works as expected on your development computer(?). Please confirm...
I need you to tell me the following:
1) how was the app compiled; any cpu, 32 bit, 64 bit?
2) how was the CR runtime deployed (what MSI / MSM did you use?)?
3) if this app is installed under custom app pool see the following:
Deploy the CrystalReportViewers13 virtual directory as a sub-directory of your application.
Copy the Crystalreportviewers13 folder to be a sub-folder at the root of your application. You can configure where your application looks for this folder by using the following Help file [SAP Crystal Reports .NET SDK Developer Guide
|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip] and search the document for ("web.config";). In the section "Configuring your web.config file" follow the instructions specified for setting the resourceURI attribute. This way you can control updates to the viewers when deploying your application.
Note the resourceURI value is the name of the viewers directory and should be preceded with a Tilde
ie value="~/crystalreportviewers13"
Also, have a look at the following two articles. Both are pre CRVS2010, however the ideas re. deploying to a custom app pool still apply. All that changes is the folder name.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Invalid Key code Error while installing crystal report server 11

While installing crystal report server 11,i am facing an erro which says Invalid Key code Error.I had raised this issue to SAP customer support and attaching the conversation that we had.PLEASE HELP me to resolve the issue.
MAILS--Dear Mohit,
Thanks for the patience.
We have received the below update from the Licensing Team.
You received your permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
You did not purchase these licenses for Crystal Reports Server, but purchased it for Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but you elected to use version XI instead and received key .
You would need to enroll the licenses in maintenance if you want to upgrade them.
In case of any queries please create a ticket via the Service Market Place.
Regards,
Jessy
Customer Interaction Center
SAP Active Global Support
Hello Jessy,
The customer received their permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
They did not purchase these licenses for Crystal Reports Server, they purchased Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but they elected to use version XI instead and they received key .
They cannot decide to upgrade now - they must enrol these licenses in maintenance if they want to upgrade them.
Kind regards,
Rosemary
From: BOSAPASIA
Sent: 29 September 2009 05:49
To: Savage, Rosemary
Subject: FW: Crystal Reports Server Installation Issue
Importance: High
HI Rose ,
Need your assistance on the below issue.
Customer purchased Crystal Report Server XI R2 in 2005. When he is trying to install it now, he is getting an Invalid Key code Error.
He has provided us the Scanned copies of the Key code and the registration number.Can you please help and check if he can be provided with a Keycode.
Regards,
Jessy
CIC Team Lead
Customer Interaction Center
Global Support Centre India
SAP Labs India Pvt Ltd
Hi,
Providing you with the required details to proceed further
Registration Number-
Registration Email Address-taxmantra.support
And also please find attached the scanned copy of the Registration key we got for the Crystal report server.
Dear Mohitk,
Thank you for your information.
I checked with the concerned colleague and received the below update:
Please check from where you got this key code. If from a paper, please scan it to us. Please let them track to the original paper or email.
If you have registered the key code, please provide us the registration number or registration email address so that we will try to check for you.
If you did not register before, as the promotion is over so the key code could not be replaced.
I request you to kindly check the same at your end and revert with the details.
Moreover, there are two ways for Crystal Report customer to get support.
One is customer with bundled product such like BOE and under maintenance. These customers will have an S-user ID and password to log a case in service market place via http://service.sap.com/message
A learning map was provided, listed on left column.
The other is customer with only Crystal report product, the support is via SDN.
http://service.sap.com =>Crystal Reports and Xcelsius Support=>Crystal Reports and Xcelsius Forums
Customers can first check whether other customer has got the same issue and find the reply from our engineers.
You may also post your own thread for support.
Anything else I could help, please do not hesitate to contact again.
Hi,
I am providing you with the details required to resolve the issue related to Crystal report installation,for reference of the issue please refer the mail below.
Please find attached the Scanned Document containing the details as per the details required by you.
Hope to see a quick resolution for the issue.
Dear Mohit,
Thank you for your e-mail.
As discussed, I understand that youu2019ve procured Crystal Reports Server 11 in 2006. However youu2019re facing issues with key codes while reinstalling the same. We request you to kindly provide us with below details for further assistance.
Your customer number:
Your customer name and address:
Purchase order number:
Any other products purchased along with Crystal Reports Server 11
Any S-User Id:
Any old case ID:
Please feel free to contact us if any further queries.
Hi,
I am raising this concern on behalf on Taxmantra project (Tata Consultancy Services noida).
We have bought licensed Crystal Reports Server 11 near by 2006.We are trying to install the crystal server but while installing ,we have encountered with an error message that:-
"The product key code you have entered is incorrect"
We are facing the same issue in 2006,I am attaching with this email the conversations that was held in 2006 to get the correct key code.
Please help us to resolve the issue as early as possible.
My contact number:
If you need any further information do let me know

Ajit,
By design, the product is not able to be installed under the superuser account.
1. Create a new user and specify a home directory for the user without a quota set.
2. Copy or move the installation files to a directory that the new user can read. I suggest you move the installation files directly into the new user's home directory.
3. Logon as the new user (or su - newuser)
4. run the installation shell script using that new user's account.
NOTE: Ensure the system meets the requirements from the supported platforms documents.
.Tony

Installing Crystal Report AddOn for 8.8

Dear All,
Please let me know how to install Crystal Report AddOn for 8.8 B one ? After installing the Addon When I am starting the Add On I am getting as error as External Connection to the database failed. SAP Crystal AddOn may not function properly. Please rerun the account setup with superuser login.
And when I click on Administration>>Crystal Reports Administration>> Account Setup screen to setup the account, I am getting error as Item- Could not commit action because the item is currently in focus [66000-23].
Regards,
Noor

Dear Noor,
You may check this thread:
Crystal reports for Business One 8.8
Thanks,
Gordon

Error in upgrade Crystal Reports for Visual Studio 2010 to SP1

During the installation of SP1 of Crystal Reports for Visual Studio 2010 (RTM was already installed) I got an error message saying:
Error 2753. The file "agent.exe.6ED28686_7B19_420C_B255_5B6C1BD2C705" is not marked for installation.
After a rerun of the setup program (choosing reinstall) the message did not re-appear.
It happens on Windows 7 x64 with Visual Studio 2010 SP1
Is this a bug in the installation or an "undocumented feature"?
Regards,
Adri

Hi Adri,
I had that error once and one other poster also had it. Like you I just re-installed and no error on the second round.
I believe it was some Windows Process had the file locked for some reason. It's not a bug or "undocumented feature" it's a Windows OS thingy....
Before uninstalling anything it may be a recommendation to reboot first and not load anything that may be locking dependencies.
How many times have you seen this?
Thank you
Don

Installing crystal reports 9 for the first time

Hi,
I am trying to install Crystal Reports 9 for the first time. We just received a package with 4 envelopes including Crystal Reports 9 Advanced, Standard, Professional, and Developer. Each envelope also includes Crystal Enterprise Report Appliation Server which I don't think I need (or I'm not sure). I have read a little bit on how I can go online to the SAP Service Marketplace and request license keys. I have not requested a permanent license key yet. I believe that I can install Crystal with a temporary key and then input the permanent key later. What I have done is insert the installation CD for Crystal Reports 9 Developer and then input the product key code found on the back of the Crystal Enterprise Report Application Server CD cover that was packaged with the Crystal Reports 9 Developer CD. However I get a message saying that the product key code is not valid or has expired. There is no product key code on the cover for the Crystal Reports 9 Developer CD but there is one on the Crystal Enterprise Report Application Server CD cover so that is why I input it.
Why is this key code expired? Please note that I am installing on a test PC before I install on the PC of the user who will be using Crystal for work purposes. Therefore I wanted to just install with a temporary key if there is such a thing at this time.
thanks
JW

Hi Josh,
I would like to add few things with above suggestion
For a new key code :
Request key codes for new orders via SAP Marketplace (SMP), will receive a download letter on new purchases providing them with their SMP login credentials. Using these credentials you can login and click in the "Keys & Requests" tab > Request a License key .
If your existing Key code does not work :
You need create a customer message [https://websmp107.sap-ag.de/message] using component XX-SER-LIKEY-BOJ .
Hope this helps,
Regards,
Shweta

Getting an error trying to install Crystal Reports 2008 on a 64 bit Windows

reformatted my computer and now I'm trying to install Crystal Reports 2008 on 64 bit windows 7 box. When the "Registering modules" portion of the install comes up, I get a message that a dll has failed to register. I saw something about not having the Microsoft Visual c++ 2005 redistributable pack (x86) installed but that was not it either.
The cd label say Crystal Reports to Crystal Reports 2008 Upgrade, but it does not seem like I have to have the older version of Crystal insatlled.
Any ideas how to fix this ?

Hello together,
i've had the same problem. Tried to install CR SP 2 "cr2008win_sp2.exe" onto an existing CR 2008 SP1 installation, and got the above error. After extracting the cr2008win_sp2.exe to an folder using Winzip (or just start Installation, the source would be extracted to "c:\temp" ), navigate to the subfolder "\package" and execute the CrystalReports.msp (in my case: c:\temp\package\CrystalReports.msp). This start's the Installation of SP 2. If you get an version mismatch, use parameter SKIP_PATCH_VERSION_CHECK=1 by typing command in an dos prompt "c:\temp\package\CrystalReports.msp SKIP_PATCH_VERSION_CHECK=1" but remember, you need to have an SP1 installed (somebody said, SP's are incremental).
Reboot and apply then the CR 2008 SP2 FixPack 7 "cr2008fp27.exe". Use this Link to Download CR and Xcelsius Stuff:
[https://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm]
I would suggest you not to use IE for downloading, use an alternative browser. I got only bad downloads (IE8 on Win7).
This is the way i did and this works pretty good.
Good Luck
Matthias

How to get Crystal Reports Editor in Visual Studio 2013 Preview?

In Visual Studio 2005, if I double-click a *.RPT file in Solution Explorer, the file opens in the Crystal Reports editor.
In Visual Studio 2013 Preview, if I double-click a *.RPT file, it opens in Notepad. How do I get it to use the Crystal Reports editor again, please?
Thanks and RICKgards
Rick Raubenheimer

Hi Rick,
Since Visual Studio 2013 is still Preview version, I don't think you can find something like this:
SAP Crystal Reports, developer version for Microsoft Visual Studio - 2012
Please notice that you will need to install additional packages for latest VS version, such as Visual Studio 2010 and Visual Studio 2012,
For more details, please reopen a new case on this forum:
http://scn.sap.com/community/crystal-reports-for-visual-studio/content?filterID=content~objecttype~objecttype[thread]
Or contact SAP for support since it is a third party feature to Visual Studio.
Best regards,
Barry Wang
<THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

How do I resolve error 1310 while installing crystal report version for visual studio 2010.

Similar Messages

Maybe you are looking for