How do I resolve PP 1.5 'can't read memory' error ?

How do I resolve the following error that occurs when working in PP 1.5 & when exiting?
Premiere Pro.exe application error. The instruction at 0x696352cb referenced memory at 0x000000bc. The memory could be for read.
Have already reinstalled PP1.5 & still get the error. Microsoft Techs have reviewed the issue on my computer and determined my system is healthy & up to date. Have been using this PP1.5 on same computer with Windows XP Fully Updated & virus free Home Version for years & this error just popped-up recently. Although I also own PP CS5.5 and use it on another computer with Windows 7, I am comfortable using 1.5 and would like to correct this error. Your thoughts are most welcome. Thank you.

You possibly has a program, or process, that is loading at bootup, and it is not playing nice with the memory addresses. It could be mis-reporting the addresses used, or could be telling the OS that it has released certain memory addresses, when it has not.
See this ARTICLE for tuning up your OS and your system, especially regarding unnecessary programs, and processes, that load at bootup.
Good luck,
Hunt

Similar Messages

TS1474 I would like to transfer the music that is already on my iPod touch to a new computer. At present, my iPod touch is not recognised on the new computer. How do I resolve that so I can literally connect it to my new computer and transfer all my mus

I would like to transfer the music that is already on my iPod touch to a new computer. At present, my iPod touch is not recognised on the new computer. How do I resolve that so I can literally connect it to my new computer and transfer all my music? Any help is much appreciated.

I would like to transfer the music that is already on my iPod touch to a new computer. At present, my iPod touch is not recognised on the new computer.
It doesn't quite work that way. Transfer your music from the old computer to the new one. Then, sync the iPod.
iTunes: How to move your music from one computer to another:
http://support.apple.com/kb/HT4527

I'm unable to add the email address for iMessage, that I was using before iOS 7 to my iPhone, because it says that it is "in use by another device," but I have no other devices. How do I resolve this so I can add this email address to my iPhone?

I'm unable to add the email address for iMessage, that I was using before iOS 7 to my iPhone, because it says that it is "in use by another device," but I have no other devices. How do I resolve this so I can add this email address to my iPhone to send and recieve iMessages?

Sync your iPhone to iTunes, and see if that does the trick. Also you could try a Soft Reset with no Risk to Data. Holding down both the Sleep button and the Home button until the Apple logo appears and then waiting for the Reset to bring you iPhone back to the lock screen. Are you trying to add the email at Settings>Messages>Send and Receive from (2 Addresses) your iPhone number and your email address?

HT1459 my daughter put a pass code on her i pod and she cant remember it how can i resolve this and i can not read the serial number its to faded and scratched

my daughter put a pass code on her i pod and she cant remember it how can i resolve this and i can not read the serial number its to faded and scratched

If you cannot remember the passcode, you will need to Restore your device...
Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808

How do I resolve a "This document could not be signed" error?

How do I resolve a "This document could not be signed" error? I received this error when trying to sign a document with multiple signature boxes. This particular box locks down most of the document. It's normally not an issue, but periodically we have a copy of this same form that does not work.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

How a collection embedded inside another collection can be read???

Is there anybody can provide me with a small exemple of how I can access the element inside a collection (set) embedded inside another collection itself embedded inside another collection. Each collection is declare in their own class.
i.e. Class 1
private Set col2 = new HashSet;
Class 2
private Set col3 = new HashSet;
Class 3
private Set col4 = new HashSet;
How can I read the element belong to col4 since the col4 is accessible through col3 and col3 through col2????
Hope I am clear enough. Could someone help???
Thanks

hi,
If set contains set0, set1, set2 at 0 ,1 ,2 index
and u want to get the element at index 3 of set1 then u should proceed as :-
Set set = new HashSet ();
Set set0 = new HashSet ();
Set set1 = new HashSet ();
Set set2 = new HashSet ();
set0.add("hello");
set.add(set0);
set1.add("how");
set1.add("are");
set1.add("you");
set.add(set1);
set2.add("i")
set.add(set2);
Iterator iter = set.iterator() ;
iter.next();
Set outSet = (HashSet)iter.next()
And now iterate through this set to get the required element
Gaurav

How do I change language if I can't read the menu?

How do I change the language if I can't read the menu?

Hello Mminge,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Apple TV: Changing language settings for system and playback
http://support.apple.com/kb/HT5255
Change the system language
Settings > General > Language
Best of luck,
Mario

Can't read RAID Error

I have tried to pause while I am booting up but I can't seem to at teh RAID load scree and it goes away really fast so I can't read teh message I get.
Something about invoking and verdor ID?????
Is there a log or a way to get it to stop so I can ready the error?

Usually "hit pause" is pretty good advice to halt post action so you can read the error messages that flash past. However, on the 925xNeo, that doesn't work for the ICH6R setupscreen.
I've got to say that I like the board, but not so well that I'd buy anything MSI again, given the zero level of customer support. Got me once, next time, I'll give Intel a shot, because at least the error messages don't read;
"Warning: Have option ROM can not invoke (Vendor ID 8086h) (Device ID 1064H)"
Which is what that warning in ICH6R POST setup says. Now we know what it says, does anybody KNOW what it means? It's been suiggested in another fourm that it's the Intel chip complaining that there is a broadcom lan in residence, but I've yet to verify that. It took me several hours to piece the error message together.

Blackberry Pearl 9105 3G can't read memory cards

Hello. I have a prototype bb pearl 9105 that works 100% except that it cannot read memory cards, ANY MEMORY CARD. It has beta OS 5.0.0.925 (bundle 1534), can the firmware be the problem?
Solved!
Go to Solution.

Hello and welcome to the forums!
Please do not double post your issue in multiple forums.
You posted this at 07:09pm
http://supportforums.blackberry.com/t5/BlackBerry-Pearl/Pearl-3G-9105-doesn-t-read-nemory-cards/m-p/...
Close this thread and we can work on your issue in the other thread.
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

How to install Unicode fonts (so I can see/read Hebrew, Arabic, Syriac)

I need to be able to see/read Hebrew, Arabic, and Syriac. I have Unicode fonts, but how are these installed on the Droid X?
Ideally, I need to also install a keyboard for these.
>(

The unicode font is indeed within the software, but the proper font package is not installed to support the actual characters. Hope this helped!

Fonts in things like Help are way to small. I have Firefox set for size24 but Help and lots of other things show up in say a size 12. How do I correct this. I can barely read this help screen.

No other details. It is all in the question.

No other details. It is all in the question.

Cwdss.exe error: can't read memory location

I have 3 PCs running XP, Service Pack 1, each with a frame-grabber card, either NI 1409 and 1409. They run identical code. Each one reads the active video channels in sequence, and saves the new image locally on a DataSocket server. These are in remote locations, with seldom a visitor. The users are near a 4th machine, which gets images from the other 3 by reading their DataSocket servers. It is slower, since it does calculations on each image. This runs 24 hours a day, but about once a day one of the 3 image-capture machines--always the same one--halts, displaying an error message and waiting for someone to notice the message and push "OK". After that, it just keeps on going as if the error was no big problem. But of course it is a problem, since the halt is not noticed for a while.
The error window is titled "Socket Notification Sink: csdss.exe Application Error". It then explains that "The instruction at location 0x0040aaf7 referenced memory at 0x482f6f72. This memory could not be 'read'." It always shows the same instruction and the same read address.
What is this telling me? How can I tell what is going on at the address cited? How can it work for hours and then try an out-of-bounds read? Why does this happen with only one of the three machines? Could this be some infrequent timing conflict between reading and writing to the DataSocket?

I am running Labview 6.1 on a Windows XP machine (Service Pack 1). I never run the code without the DataSocket, since the whole point is offer new images when needed to the PC in the room with the users, which does all the serious calculations. The image is stored in the DataSocket server as a 640 by 480 integer array of either U8 or I16 format, depending on the type of frame-grabber. The machine with the errors has a 1409 and so gets 10-bit data, saved in I16 format. The odd aspects, again, are that the program runs without a hitch for a day or so, then does this illegal read, and that the same code runs on two other machines without this problem ever showing up.
Thanks,
Alan Fisher

F1 crashes DW MX 2004 - "can't read memory"

DW MX 2004 - F1 causes program crash.
After using Trend PC-cillin and PCTools for a few weeks, I
tried to use DW MX 2004, v.7.0.0, but had a few problems. I tried
reinstall again, but still the reinstallation wasn't 100%
successful. Searching the Internet, I found out I had to update to
v.7.0.1. This I did and was then successful in reinstalling DW.
However, whenever I click on F1 or on the pull-down menu for Help,
DW displays the message: Application Error ... The memory could not
be read." The program then crashes.
Anyone out there know why and how to put this right? I run
Win XP Home SP2, Build 2600. I've tried AShampoo's WinOptimizer 3.0
to clean the memory and redundant registry entries. Thanks for any
tips!
ShareAlike

See if this helps:
Dreamweaver crashes when accessing help system when Internet
Explorer 7 is
installed
http://www.adobe.com/go/6d7a2c59
Hope this helps,
David Alcala
Adobe Product Support

Can not read back error description in VB

I am using: flex_get_error_description Lib "FlexMotion32.dll" (ByVal descriptionType%, ByVal errorCode&, ByVal commandID%, ByVal resourceID%, charArray%, sizeOfArray&) As Long. The definition for "charArray" is short, while VB does not provide such type. (In your old version, it is string type.). As such, how could I retrieve the error description?

This issue will be fixed in the next release of the NI-Motion driver. In the meantime, you basically need to change charArray% to ByVal charArray As String. Therefore, the correct prototype is as follows:
flex_get_error_description Lib "FlexMotion32.dll" (ByVal descriptionType%, ByVal errorCode&, ByVal commandID%, ByVal resourceID%, ByVal charArray As String, sizeOfArray&) As Long
I hope this helps!
Best regards,
Dawna P.
Applications Engineer
National Instruments

How to get thread dump in case of out of memory error.

Hi Team,
In case of out of memory, heap dump can be generated using option '- XX:+HeapDumpOnOutOfMemoryError'. Is is possible to generate thread dump too using any option? Can it be done using option -XX:OnOutOfMemoryError="<cmd args>?
Thanks in advance.
Regards,
Atul.

Jay SenSharma wrote:
Hi Mukul,
Complete Steps can be Devided into 3-parts
A). Configuring a Mail-Session
B). Configuring WLDF Module
C). Configuring Watch And Notification
For detailed <A class=bodylinkwhite href="http://www.software-to-convert.com/divx-avi-conversion-software/divx-avi-to-h264-software.html">steps</A> please refer to: <A class=jive-link-external href="http://jaysensharma.wordpress.com/2010/01/07/e-mail-notification-using-wldf/">http://jaysensharma.wordpress.com/2010/01/07/e-mail-notification-using-wldf/</A>

Thanks
Jay SenSharma
<A class=jive-link-external href="http://jaysensharma.wordpress.com">http://jaysensharma.wordpress.com</A> (WebLogic Wonders Are here)
It is just the solution for my problem, It's very useful.

How do I resolve PP 1.5 'can't read memory' error ?

Similar Messages

Maybe you are looking for