How do I resolve the "insufficient data for image" error for Adobe reader 11.0.04?

Hi Johnkel1524,
Please refer : http://helpx.adobe.com/acrobat/kb/insufficient-data-image.html
Also try updating to 11.0.5 and check.

Similar Messages

How would I find the first date a shipment occurred for a specific material

We need to determine when an item is new and set the u201Cnew item indicatoru201D to True. Once a material is considered new, the u201Cnew item indicatoru201D should remain true for a period of three years. Each week, a process needs to run that looks at the material master data (First Arrival Date) and compares that with the current date to check if three years has passed. If three years has passed, then the u201Cnew item indicatoru201D should be set to False. Initially, all items need to go through this process to set the new item indicator.

Hi,
You could setup a DSO keyed by material in which you have a date key figure that is set to MIN aggregation in the transformation. If you load that DSO from your shipments, it will automatically keep the date of the first shipment.
You could then run a periodic load that could be picking up all the materials whose date in the DSO is older than 3 years and which are still marked as NEW_ITEM. In that load you then update the NEW_ITEM status.
Cheers
Henry

How do I stop the tools/sign/comment bar appearing in Adobe reader?

Hi,
everytime I open Adobe Reader XI (Windows 7) the tools/sign/comment bar appears. It takes sometime to load as it presumably connects to the internet.
I do not wish to use any of these functions (some of which are only available with a subscription).
I close the group by clicking the tools pane and it goes away, increasing the screen area available.
I don't want to have to close this everytime (nor do I want pdfs to always open full screen).
Is there an easy way to permanently stop the tools/sign/comment bar appearing?
Thanks for your help
Ellie

Pat you are correct as I am able to Enable Automatic prompting for file download in the Internet security Zone of IE and then this will automatically prompt for the file download. I am trying to determine if there is a way to have all PDFs open automatically without lowering security for all downloads. On my personal device a PDF from a site will open in browser without either of these prompts. I do have IE9 on my PC however the other PCs are still stuck on IE8. In my troubleshooting I did notice that the Active X for Adobe PDF Reader is listed under the Run without Permission, but is not in the All add-ons section. This just seemed odd to me.

How can I disable the "Cellular data is turned off for this app" message while on WiFi?

Super annoying: all apps I disable cellular data for popup with this message while on WiFi. It makes total sense for the message to display while on cellular data, but how can I make it stop while I'm on WiFi?!?!

I find it very frustrating that only some users like me but not all have this issue.. This is clearly a bug in within the newest update and it is the most annoying. Apple need to fix this. I have no data, it comes up, the wifi is on, it comes up. Regardless of what i do, On or Off and even restoring the device it still continues to do it. Anything posted about how to fix this issue "manually" will be disregarded until Apple tech fix the software issue..

How do you disable the "Cellular Data is Turned Off for '[app]'" message?

I keep getting this message on my iPhone. I know that the programs' access to cellular data has been turned off. Does anyone know how to disable this message? Is Apple going to fix this software issue (I know many people have had this problem too)?

I find it very frustrating that only some users like me but not all have this issue.. This is clearly a bug in within the newest update and it is the most annoying. Apple need to fix this. I have no data, it comes up, the wifi is on, it comes up. Regardless of what i do, On or Off and even restoring the device it still continues to do it. Anything posted about how to fix this issue "manually" will be disregarded until Apple tech fix the software issue..

How do I resolve the "Mozilla cannot find runtime" error message when I try to start Firefox?

Mozilla Firefox updated to version 36.0. When I click on the Firefox icon to open it I receive the message: "Mozilla cannot find runtime" I receive the same message if I try to open Firefox by selecting "firefox.exe" from within the Program Files. I subsequently uninstall Mozilla Firefox and reinstall it. It will open and run normally right after the re-installation. Then if I close the program and try to re-open it again, I get the same "Mozilla cannot find runtime" error message.
The only way I can get Firefox to open is if I uninstall and re-install it every time I want to open it after the initial re-installation.

''sage68 [[#answer-700841|said]]''
<blockquote>
Hi Adriel,
The "Mozilla cannot find runtime" problem has returned. It occurs in two situations:
1. When Firefox tries to download updates using "updater.exe" (version 36.0.0.5531), which causes my "Norton Internet Security" program to notify me with the message: "Auto-Protect has removed security risk Suspicious.Cloud.9.B" This message is shown every time "updater.exe" activates.
</blockquote>
I also have experienced this during several upgrades, not just the latest. (I am using Windows XP and Norton Security Suite.) Norton identifies c:\program files\mozilla firefox\updated\xul.dll with the Suspicious.Cloud.9.B virus and removes the file. I can set the Norton installation to accept xul.dll but it would make more sense for a Mozilla expert to contact Norton and work out a permanent solution, for all who are facing this problem.

How can I lock the annotations on my PDF file in Adobe reader version 5 with write access

I have Adobe Acrobat ver 5.0.
I have labelled (annotated) certain fields in my files. Now I need to lock the label to make it write protected.

You just apply security. Not full proof, but it is what Acrobat offers.

How do I change the start date for the week from Monday to Sunday on my iPhone 5?

How do I change the start date for the week on iCal from Monday to Sunday on my iPhone5?

Yes. On my new iPhone 5 the iCal week begins on a Monday not a Sunday and does not give me the option to edit in settings on the phone

How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file for

How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing , or the file may be open in another application?

Shouldn't the CC version be able to open any file created in an older version on InDesign?
Yes, it ought to.
If the older file wasn't yours (if someone emailed it to you,or burned it on a disc, or whatever), then I am almost willing to bet you a beverage in the city of your choice that it's not a complete InDesign file. That is, maybe it was zipped and renamed, or the beginning or end of the file was chopped off during download, or something like that. The only reason I'm not actually making the bet is that there is a remote chance that I'd lose, and maybe you're in Adelaide or Khabarovsk or somewhere where the cost of airfare to me would make that bet a very expensive bet for me to to lose. So no latte for you if I'm wrong!
The script that Jongware posted will tell you what version of InDesign made the file to begin with. Additionally, if someone did something like rename YourFile.PDF to YourFIle.INDD, it'll report that it's Not An InDesign File. Because while SpectrumPCS is kinda right and that message can be generated when attempting to open a CS5 file in CS3 or whatever, it also spits out the same message when you just try to open an Autocad file, or a Windows system file, or a PDF, or any file that InDesign actually cannot open at all.

How do I resolve the Apple ID security questions for which I have forgotten the answers to access my iTune store account

How do I resolve the Apple ID security questions for which I have forgotten the answers to access my iTune store account? Please assist.

If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps on this page will give you a reset link on your account : http://support.apple.com/kb/HT6170
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620

How to regularly update the Master data/Text/ Hierarchy for BW DEV?- Urgent

Hi Experts,
Can anyone help me to understand how to update the Master data/Text/ Hierarchy regularly for BW DEV.
Since all the new query developments are taking place in DEV, users are not finding the latest Masterdata/ Texts /Hierarchy in the DEV system.
I have searched in SDN and got a document "HOW TO DOWNLOAD A HIERARCHY TO A FLAT FILE". However, is there any other way to upload the master data automatically on periodical basis.
Please help urgently.
Advance Thanks,
BW USA

If you want to extract master data from PRD in order to load in DEV, i suggest to do this (its a tricky thing):
For example, you want to download 0EMPLOYEE
1-In PRD, transaction RSD1
2-Enter 0EMPLOYEE
3-Copy the Master table for 0EMPLOYEE (/BI0/MEMPLOYEE)
4-transaction SE16
5-Enter the table name /BI0/MEMPLOYEE
6-in the selection screen, go to "Options" Menu and select "User parameters", and now select "Standard List SE16"
7-Execute
8-Now its show's up the 0employee data, go to "System" menu - List - Save - Local File
9-After you have the flat file, only rest create Infopackae in DEV Env. and load it from the flat file.
Asigns points if useful.
Regards

How should i get the delta data for those new object's previous delta data?

Hallo all,
i have 2lis_11_vahdr and i am using a standard and loading delta! now i have appended some new fields in the datasource then in infosource then in ods and infocube..! now how should i get the delta data for those new object's previous delta data???
Jimmy

Hi,
After appending new fields in the datasoure.It is not possible to delta load, u should have to load everything
Thanks,
Shreya

I wish to set a repeat for an event but I do not get a customise option on my iphone 4s so cannot set the third monday of the month - only day, weekly 2 weekly monthly or annually - how do I resolve the problem ?

I wish to set a repeat for an event but I do not get a customise option on my iphone 4s so cannot set the third monday of the month - only day, weekly 2 weekly monthly or annually - how do I resolve the problem ?

Week Cal uses the calender database already on your phone. It's just a different front end.

How do you restore the "Last Date Played" notice in the iTunes window for songs?

How do you restore the "Last Date Played" note in the iTunes window of playlists? I lost this a couple of weeks ago, and had someone explain the steps to take (which are not on the iTunes "Help" menu). Thanks.

In the playlist, Right Mouse click on the column headers and it will give you a list to choose from in the pop up select Last Played and that column will display

Reader XI still gives "insufficient data for image" error

Our fax machine creates .pdf files of the faxes and recently our back office has had trouble printing them. When I look at them they give an "insufficient data for image" error, but only on one page each. I've tried upgrading to reader XI but the problem persists. I've gotten around it by taking a screenshot and printing the one page that doesn't work so far, but I'd like to get this fixed. It only started happening today. I have a call in to our fax provider, but I was wondering if anyone here had any possible solutions.
Thanks,
Also due to the nature of the documents I'm unable to provide a sample.
Message was edited by: riderryuken

It is also happening to me (running v 11.0.2). I tried adjusting the various settings under the "View" menu and at best could only see part of what was missing. I resolved the issue by downloading and installing Foxit Reader. Bingo! now I can see the entire document.

How do I resolve the "insufficient data for image" error for Adobe reader 11.0.04?

Similar Messages

Maybe you are looking for