How do I resolve: You are not permitted to open this document. It may be assigned to another user."

I am the only user on a computer, and have ordered two codes on line, and used them for a long time. Recently redid hard drive, and now I cannot open those two files only. I get the message: "You are nbot permitted to open this document. It may be assigned to another user." I am the only user, and maybe the name of the computer is different. How can I resolve this by accessing what permission and what user it is talking about.
Thanks to anyone who may be able to assist.
Gary

Thanks for your answer, however the user currently have the next configuration to sales documents flow:
Sales - A/R     Various Authorizations
Sales Quotation     Read-Only
Sales Order     Read-Only
Purchase Order Confirmation     Read-Only
Delivery     Read-Only
Return     Full Authorization
A/R Down Payment Invoice     Full Authorization
A/R Invoice     Full Authorization
A/R Invoice + Payment     Full Authorization
A/R Credit Memo     Full Authorization
A/R Reserve Invoice     Full Authorization
Document Generation Wizard     Full Authorization
Document Draft     Read-Only
Document Printing     Full Authorization
Dunning Wizard     No Authorization
Execute a dunning run     No Authorization
Sales Reports     Full Authorization
Sales Analysis     Full Authorization
Backorder Report - Selection Criteria     Full Authorization
Checking the configuration, this user can create for example AR invoices, but could not see previous records and neither the created by him. Using the Open Item list, the user can see the documents but can not open it. In the other hand the system has not activated the data onwership function.
Regards,
Manuel

Similar Messages

You are not permitted access to this workstation at the moment. Please contact y

Showing error "
You are not permitted access to this workstation at the moment. Please contact your IT administrator.
This topic first appeared in the Spiceworks Community

Showing error "
You are not permitted access to this workstation at the moment. Please contact your IT administrator.
This topic first appeared in the Spiceworks Community

I am being blocked from my "favorites"on my iPad 2 with the following....... You are not authorized to open this file. What do I need to do

I'm being blocked from my favorites on my iPad 2 with the following........... You are not authorized to open this file. What do I do?

I'm not sure whether you have tried the "usual" things:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Command+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
* "3-bar" menu button (or Tools menu) > Options > Advanced
* Firefox menu > Preferences > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* classic Tools menu > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?
In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?

You are not registered to use this service

We have everything with BT including a new TV box with netflix etc, which is currently at the end of the 14 day cooling off period. If the following problem isn't resolved today I will be considering cancelling the TV contract and leaving BT all together.
Our phone was working ok on the 15/4/2015. I tried to dial a local number last night (16/4/2015) to hear 'you are not registered to use this service please contact your service provider'. I dialled again with the area code, same thing. Also with national and mobile calls. We can receive incoming calls. I rang the Indian call centre who said there is no problem with the line or the account (which is in credit) it must be the handset. I am waiting for them to ring me back but having searched the problem online I think this will be to no avail. I have read about prefixing phone numbers with 1280 and this has worked when trying to ring my own mobile, so it can't be a problem with the handset, can it?
I've seen it could be a problem with Indirect Access IDA being removed from my account (no idea how this might happen). I also know that there was a major outage last week (around 6/4/2015) in our area which led to the freeview HD channels not being available. I had to reset our router which cleared the problem but were Openreach in our area doing something to the exchange boxes etc?
I need this problem sorting out A.S.A.P. please.

The fact that if you use 1280 it allows successful calls suggests your line is set as CPS , carrier pre select, if this has just happened it suggests a CPS provider has taken your 'line' for calls if not for line rental, but it's not properly set up otherwise calls would terminate it would just be billed by the mystery CPS provider
Have you had any approach by company's that sell this product ?, sometimes ISP's who's product includes calls can use CPS, if not, and you haven't been 'slammed' you need BT to set your line as non CPS , so BT handle your calls automatically without using 1280
This should be easy to get done, but the drones that answer the calls probably won't have a clue, hence the 'it must be your handset' nonsense they come up with, report the line faulty,don't accept an appointment, and insist they sent the problem to what was once called BT Operate, they look after the telephone exchange equipment and it's 'data',

You are not authorized to execute this application in SAP E-Recruit

Hi,
We are getting the below error while going to recruitment page for recruiter:
"You are not authorized to execute this application"
At the same time when we check in SLG1, we get the below errors:
No candidate could be found for US E0023127
The error occurred in program CL_HRRCF_CANDIDATE============CM003 line 361
Apart from this we are not getting any dumps/traces in ST22/ST05/ST01.
When we encountered this error for the first time, we executed the report RCF_CREATE_USER in SE38 and the problem was resolved.
We got the error again 2 days back, after that also it got automatically resolved. But, now we are getting this error continuously.
We also tried re-executing the report RCF_CREATE_USER and HRALXSYNC but no use.
The service user (for recruiter) is a reference user from RCF_CAND_INT.
We have also tried giving different roles and authorizations to the user.
SAP_ERC_RECRUITER_CI_4
SAP_RCF_RECRUITER
SAP_ERC_REC_ADMIN_CI_4
SAP_ALL
We are in ECC 6 EHP 6 and we have a standalone EREC system with ERECRUIT 617 SP3.
We are stuck at this point in our EREC project.
Kindly provide your valuable suggestions for this issue.
Thanks in advance!
Regards,
Khushboo

Hello Khushboo,
the message you are getting is a bit misleading as it is the standard behavior of the quick search if the user you are logged in as recruiter does not have a candidate assigned. So the message in SLG1 points into the correct direction.
I am not sure what you are meaning by "the service user (for recruiter)". Although table T77RCF_ROLE allows to specify a reference user for all roles in eRec only the entries for internal and external candidates are actually used. So the authorization assignment for the recruiter specific roles has always to be done directy for each user. A reference user could be overwritten / reset to RCF_CAND_INT by the ALE.
What bothers me a bit is the user name and that you mention RCF_CREATE_USER and HRALXSYNC at the same time. This might be the reason for your issue. Looks like you created a candidate for a user using RCF_CREATE_USER which is later transferred in the ALE from HR Core to eRec. This was not a good idea. RCF_CREATE_USER is only for creating project users when the HR core to eRec and for special users who need a candidate while do not have an employee id in HR core (e.g. WF-BATCH). This is why I always recommend to use non-production user Ids for everyone during project phase. Its been quite a time some of my projects did otherwise and I remember a similar issue with one of the customer admins. Everytime data for the user / employee was send in ALE the candidate / user was messed up.
Getting this fixed was quite troublesome. In the end we had to dump the original candidate. We deleted all records between candidate object, central person, business partner and person object in HRP1001. By that time the customer was still on the old ALE version so today I would also delete all entries in HRP558X infotype tables for the employee. Then I would first try to finger the employee id (e.g. change the name, save, directly change it back, save again ) so it is transferred during the nightly processing of the change pointers and put in the IDoc. If this is not working I would try to transfer it again using PFAL.
Kind Regards
Roman

"You are not authorised to control this computer"

We have a new Mac that has been installed at a remote site, and I am trying to remote control this for the first time. I have added discovered this in ARD and can 'observe' the machine - but when attempting to 'control' it, I receive the message "*You are not authorised to control this computer*"
I have checked the settings on the Network/Sharing screen, and 'all network users' are permitted to gain access.
Anyone have any ideas?
Many thanks -

Oops... missed a setting in 'Remote Management' (Options).
All sorted now - as you were.

Trying to open Terminal I get;You are not authorised to run this application. The administrator has set your shell to an illegal value.

Hi There Y'all,
I have recently downloaded MacKeeper. It ran OK for a bit, but has recently stopped allowing Internet security updates and switching on of the internet protection options.
Asked for help at MacKeeper. Their initial advice did not work, so a very nice technician was going to remotely attempt to fix the issue.
He however needed/still needs access to Terminal, a to me unbeknown Utility feature of my MacBook pro with Mac OS X 10.6.8.
While attempting to open Terminal the following came up
You are not authorised to run this application.
The administrator has set your shell to an illegal value.
Did do a diskverify permission and repair and restart.
Did check my admin settings in advanced options and have the /bin/bash.
Any advice anyone.
Thanks.
in site out

After finally localing private/etc/shells through Go>Go to folder and replacing the empty shells with the shells~orig I have permission again to open Terminal. Thanks. Another step.
(Why though can't I access /private/etc/... through Finder's search?)
Should work but the file or folder needs to exists to access it. If you typed in /private/etc/shells and the file wasn't there there's no place to access. Certainly /private/etc was there so that would have worked.
So what will happen by inputting the lines
ls -Fvl /bin/bash
ls -Fvl /etc/shells
more /etc/shells
into Terminal?
Basically to find out what you already seemed to find out. The first command was to display owner, group, and permissions of /bin/bash and to tell me whether it still existed.
Similarly for /etc/shells.
And the last command would have just displayed what was in /etc/shells.
By the way /private/etc and /etc are the same folder.

[HP Expert Day] "You are not able to restore this system with the media"

Welcome to HP Experts day!
I've got a long-standing problem since last year. Let's see if you can solve this!
I'll get straight to the point :
I am unable to perform recovery on my system. This is the error message :
It's a USB recovery media created with the HP recovery media utility on the same laptop. Tested to work correctly before I sent it for RMA on my SSD. It initially was running on a micron SSD. When I got it back, it was a samsung SSD instead, according to some benchmark results.
Laptop : HP Envy Spectre XT 13-2018TU
P.S I've already opened another thread on this last year.
http://h30434.www3.hp.com/t5/Notebook-Recovery/Unable-to-boot-from-USB-recovery-media/m-p/2197929#M1...
But they were stumped.

I had this exact same issue on a Spectre XT Pro Ultrabook.
The original SSD failed and I was sent a replacement, was fortunate enough to be able to create a Recovery USB stick using the wizard in Windows. When booting from USB I received the message "You are not able to restore this system with the media".
SOLUTION: You must NOT use the Recovery USB stick in any USB3.0 port (labelled SS). Using another USB port prevented this exact error message from appearing and I was able to complete the system restore process.
I hope this helps someone, I signed up and posted here especially for this reason!

Com.sap.aii.adapter.file.ftp.FTPEx: 550 You are not allowed to issue this

hi All,
We are getting below error while connecting to an FTP location through File Adapter:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server XYZ. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 You are not allowed to issue this command'. For details, contact your FTP server vendor.
Also when we tried to connect to this FTP location through PI server we able to connect, but when we connect to it through channel we are getting above error.
Please Help!
Thanks,
Mayank

hi All,
The usedid we are using to connect to FTP location has appropriate access to write(we have an receiver file adapter) the files, when we connected to FTP location from PI server using same useid(as used in channel) we are able to connect to FTP location and also able to write the file there.
Now error soming is:
An error occurred while connecting to the FTP server XYZ. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Operation is not supported under Connect:Enterprise FTP server.'. For details, contact your FTP server vendor.
Thanks,
Mayank

Error : You 're not permitted to perform this action - Absence Report

Dear all, I need some help here,
My user need to open "Inventory in Warehouse" report. Basically, he could open aforementioned report (parameter selection), but after he click "OK" button, SAP subsequently show error message as below
You 're not permitted to perform this action - Absence Report
I have already grant "Full Authorization" for "Inventory in Warehouse" report (indeed, my user could already open "Inventory in Warehouse" forms, problem occurs after he click "OK" button)
Its pretty confusing for me, because this only occurs for "Inventory in Warehouse" report only. It doesn't occurs for "Inventory Posting List" report or for instance "Inventory Status" report. It only occurs for "Inventory in Warehouse" report.
Some advice would be appreciated here.
Thanks in advance.

Hi Iwan...........
You have two modules to be authorised to your users for that. One is Inventory module and give authorisation to inventory reports. And second is Reports module in which again you have to give authorisation to the same inventory reports sub module.
I hope this will work out.
Regards,

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

If you'd asked a question in your original post it might have solicited more pertinent responses. As it is, you were stating a fact. No one knew whether you considered that fact a problem, or what you were hoping to gain by doing so.
The simple addition of 'can anyone help me fix this so I can run Terminal' would have counted for a lot.
As it is, your solution is likely to require the Terminal, so you're going to need to fix that one way or another. The simplest would be to create a new admin account (System Preferences -> Users & Groups) then log in using that account.
Then try and launch the terminal. If that works the problem is specific to your original account and can likely be fixed via some command-line tweaking. I'd start with:
dscl . read /Users/<username>
(where <username> is the short name of the account having a problem). This will show the records in the directory data for your account, one of which will be UserShell. Chances are that value is invalid, or missing, and can be corrected via:
sudo dscl . -change /Users/<username> UserShell <currentValue> /bin/bash
(where <currentValue) is the current setting for UserShell) which will change the user's shell to /bin/bash (the default).
Of course, you might already know this and already tried, but since you didn't say so in your original post it's worth checking.

You are not authorized to open the form ORA-01403: no data found

Hi,
I have created a new Oracle 10g forms. It compiles sucessfully but when it is opened it gives a error message : You are not authorized to open the form ORA-01403: no data found.
I am already connected to database. Can anyone please help what is the reason for this issue and any possible resolution?

Sounds like you have some kind of security enabled. However, because you didn't share the details about your environment or what you are doing there isn't much we can do is guess.
Exactly which Forms version are you using?
Exactly which database version are you using?
Are you using anything like Oracle E-Business (e.g. template.fmb)?
Did you create the form with Oracle Designer?
If you create a simple form using only the DataBlock and Layout Wizards against the Oracle demo schema (SCOTT), does this form run?
Any additional details outlining what you are doing or have already done might be helpful.

Error message:you are not licensed to open form

Hi readers,
I just want to ask how can i resolve this error message." youare not licensed to open form" it appears when i try to open the production order using the account of one user.in admin account I already choose the "read only" but stil it dosent show.hope you can help me..
Vsha

Then I would suggest the user does not have access to the module using that license.
You can test by assigning a full professional license & testing

When trying to transfer an e-book I get an error message "Copy not allowed. You are not allowed to copy this book.

I am trying to copy a book from digital editions to my nook and am told "You do not have permission to copy this book". Yet all I want to do is move a copy to read it.

The publisher of the book seems to have restricted copying of the book on to other devices. Contact the book distributor.

UAG 2010 SP4 Cold Fusion Web Application "You Are Not Authorized To Access This Application" error

Hi folks,
2010 UAG SP4 publishing a web app that is a Cold Fusion login page.
The portal trunk is set to not verify URLs and open with that page directly rather than a Portal page, I also have it set to not install client components, basically using UAG as a reverse proxy with some other items.
The published app does not require authentication and all users are authorized the path is as follows:
/index.cfm?FuseAction=Security.Login
And the hostname is set as www.apps.x.x.edu name removed but is correct. UAG has an http to https redirection and it requires https.
The Portal Link has https://xxxx as the address which is correct as it is using an SSL connection to the backend web server and I can reach the page successfully from the UAG server by simply browsing.
I previously had the application launching within the portal but the client does not want the extra step so I removed the portal interaction all together and while I had the application launching within the portal, it worked. I'm not certain what changed
to make it fail, though.
In the Web Monitor I receive this error:
A request on trunk nonuvaportal; Secure=1 failed because of an unknown application. The URL is /index.cfm?FuseAction=Security.Login. The source IP address is 137.54.129.238. The user is .
Any help or tips or advice would be superb.
Thanks,
Justin

And an update, I did another application publishing on a separate trunk/portal to a similar page
/index.cfm?FuseAction=Programs.Home
And I get the same error. Is there a switch/setting/policy I am missing to allow it to run those?

How do I resolve: You are not permitted to open this document. It may be assigned to another user."

Similar Messages

Maybe you are looking for