How do i restart outlook

Dear All,
How do i restart my outlook. Its hanging and i cant do anything with it. I cant alsoshut dowm my Mac only to sleep. Please help.
DI

Try  -> Force Quit, choose Microsoft Outlook and click Force Quit. Then see if you can restart the computer and relaunch Outlook.

Similar Messages

How to Fix ''The messaging interface has returned an unknown error. If the problem persists, restart Outlook.' Error

How to Fix ''The messaging interface has returned an unknown error. If the problem persists, restart Outlook.' Error, user has outlook 2007 connected to exchange 2010 server , I tried scan pst, configuring new profile but no luck so far. Please suggest !
Aditya Mediratta

Hi,
Please try the steps mentioned below and check if it helps:
Open Computer > Local Disk C > Program Files > Microsoft Office > Office 12 > Outlook.exe.
Right click on outlook.exe and click on Properties and then click on
Compatibility tab. Uncheck the box ‘run this program in compatibility mode for’ under compatibility mode, click on Apply and OK.
Note: If you are using 64 bit computer then the file location of the file will be
Computer>Local Disk C>Program Files (x86) >Microsoft Office>Office 12>Outlook.exe
Similar thread:
https://social.technet.microsoft.com/Forums/en-US/aa396c9e-0ce5-4de5-99e3-4f0d771b07e0/exchange-2007-messaging-interface-has-returned-an-unknown-error
Best Regards.

Exchange 2013 SP1 users randomly prompted with "The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook"

I got a call to check an issue with a Exchange Server 2013 SP1 environment recently. All server was upgraded from Exchange server 2013 CU2 to Exchange Server 2013 SP1. It was done successfully but many users were being randomly prompted with a popup in their outlook
client with the following message:-
“The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook”
Although there wasn’t any changes of late in the environment there were random popups like these for multiple users. As the behaviour was not consistent and effecting the entire upgration population
Please suggest us how to resolve the issue.
Regards, Md Ehteshamuddin Khan All the opinions expressed here is mine. This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

Hi,
Does the issue happen to all Outlook 2013 users? Please create a new Outlook profile to have a try.
If it fails, please check the msExchHomePublicMDB value in ADSI Edit:
1. In Adsiedit, expand Configuration-->CN=Services -> CN=Microsoft Exchange -> CN=domain -> CN=Administrative Groups -> CN=Exchange Administrative Group -> CN=Databases.
2. Right-click the listed database > Properties.
3. Check whether the msExchHomePublicMDB value is set to an available value. Please change the value to <not set>.
4. Click OK.
Then check whether the issue persists.
Thanks,
Winnie Liang
TechNet Community Support

Random "The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook" message

I've looked and looked again and cannot find any solution to this issue...There are plenty of posts related to this error message however none of the resolutions work for me.
We have a cluster of 3 MS Exchange Server 2010 SP2 RU2 machines with CAS, HT and Mailbox roles installed on all 3. Those 3 machines form a DAG and are behind a CAS Array. This is done using a pair of Riverbed
Stingray Traffic Manager appliances.
The above error message keeps popping up randomly on my users' workstations running Outlook 2010 with cache mode enabled (Outllok 2007 users do not have this issue). It pops up when nothing is being done to the platform...i.e. I'm not moving any mailboxes,
not activating nor suspending any mailbox databases, not updating the rpcclientaccessserver attribute on any databases (that property is configured correctly on all my databases...). We have SP2 RU2 installed which means that the message should only pop up
if the conditions in
THIS ARTICLE are observed and none of them are when our users see the message...
Next thing on my elimination process is the load balancers...I've read about some admins having this issue when using Barracuda LBs for their CAS array (see
this thread). I thought about session persistence settings not working properly but after some testing I figured out it doesn't make any difference if I use 'Source IP' or 'Cookie Based' as my persistence method for various services (OWA, MAPI, etc). The
end users still see the message popping up randomly. Can anyone confirm Source IP is better? Or shall I stick with Cookie based for OWA services? Also I'm offloading SSL on the load balancers but I fail to see how this would be a problem. It's configured OK
as per MS' SSL offloading guidance.
Those users use Public Folders and my PF store reside on one of our servers only (as we are in a DAG). Because we have all 3 roles installed on all 3 servers, users can potentially connect to either 3 (if we assume that session persistence is not working
properly). Could this be an issue?
The pop ups are so random that I'm running out of ideas on how to troubleshoot this...
Has anyone got any idea at all?
Other things I've tried or checked:
- tested Outlook connectivity OK
- modified pool and service settings on my load balancers to check if those triggered the pop up, to no avail (only when I switch the main virtual IP from one traffic manager to the other the message pops up, but that is to be expected!)
- tried disabling the 'show Exchange messages' option on the client side (which is obviously not ideal...but the pop up still occurs anyway)
Regards, Raphael

I have left a laptop on for a number of days with a test account logged in to Outlook 2010 (with modified hosts file to bypass the load balancers, e.g. always hit the same node). The message never popped up. This can certainly be a clue however unfortunately
it doesn't 100% mean that the issue comes from the LBs as some users get the message randomly with sometimes more than 2 weeks apart...
Another thing that we thought maybe a problem is we have noticed that this problem occurs more for people with laptops with both Ethernet and Wifi adapters plugged in at the same time. Those users un-dock their laptop to go to a meeting for example, and
the wireless connection kicks in, then dock it back in to their docking station and the wireless connections stays on, as well as their Ethernet one. This sometimes changes the state of their Outlook connection status from TCP/IP to HTTPS and vice versa. This
also depends on if the office LAN is running slow or not at the time. But surely I would have thought switching client IP address all the time may be an issue? Does anyone know if this could be a problem when connecting to a CAS Array/DAG Exchange platform?
On the other hand I have tested having both connections on on that test laptop and the message never popped up. But yet again I was bypassing the load balancers.
Their RPC over HTTPS Exchange Proxy Settings are all set with:
- On fast networks connect using HTTP first then TCP/IP - disabled
- On slow networks connect using HTTP first then TCP/IP - enabled
I have a case open with our load balancer vendor and their Exchange expert is supposed to get in touch with me to review all the settings and Exchange config. I'll update this ticket if we can find more clues, or ideally, a solution to this issue!
Hi Greg,
I do face the same problem - running two node E14 SP2 RU2 DAG after moving 2600 mailboxes last weekend. We bypass the F5 already - still the same issue using Outlook 2003/2007/2010 clients where randomly choosen ones do get the restart outlook message (at
least we couldn't find a pattern). Also clients with mailboxes moved three weeks ago are affected. Both E14 multirole (C/H/M) have a replica for PF. There is one Exchange 2003 two cluster node left with around 350 mailboxes. Could it be caused by some sort
of Outlook Add-In?
many thanks
tiZ.A: Thanks for giving me some sanity back :-) I'm not the only one to whom this happens! do you know that moving mailboxes between databases is one of the legitimate reasons why this message would pop up for? (ref: http://blogs.technet.com/b/exchange/archive/2011/01/24/3411868.aspx)
The strange thing is that for you it doesn't seem to happen for ALL your mailbox users, but just random ones? Also we only have noticed this issue with Outlook 2010 clients ONLY. No 2003/2007 ones.
Regards, Raphael

The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook

Hi
We have 2 separate Exchange 2013 organisations in Our Company. All mail comes in on the first server registered With domain1.com and if it is mail Connected to the second server it is forwarded to server 2 which is registered With domain2.com.
When the users Connected to server 2 sends out mail they have default mail address firstname.lastnameATdomain1.com so the default address policy points to an email address registered on server 1. We have added a GPO for the domain2 users so that
Autodiscovery updates with the right domain name.
The problem is that every time a user With Outlook 2013 starts Outlook he gets an error saying "The Exchange administrator has made a change that requires you quit and restart outlook". This Message shows about every 10 minutes in Outlook. I think
this has to do With the autodiscover settings, but I'm not sure.
Any Idea how to remove this Message?
Regards
Anders

Hi,
From your description, I recommend you follow the steps below to repair the Exchange email account and check the result.
1. Start Outlook. Click File, Account Settings, and then click Account Settings.
2. With the Exchange email account selected, click Repair. In the Repair Account dialog box, click Next.
3. After the configuration finishes, restart Outlook.
After you restart Outlook, the status bar may show your status as Working Offline. To connect it, click the Send/Receive tab, and then click Work Offline to turn off this feature.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook - error message

I applied Exchange Server 2013 SP1 and since then some users are getting error message:
'The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook' on their MS Outlook.
Have tried a number of options including repairing the affected user accounts to no avail.
Any idea on how to resolve this will be appreciated.
NB: This error was not there before applying SP1.

kindly need help. i have same message "'The Microsoft Exchange Administrator has made a change that requires
you quit and restart Outlook' on their MS Outlook"
this is comes after applying 2013 sp1

Restart Outlook prompt

So I just updated my iPod Touch 4th Generation to iOS 5. I was setting up iCloud to work on all my devices, which--along with my iPod--includes my Windows PC running Windows 7 with Service-Pack 1, and the software running is Outlook 2010, fully up-to-date; Safari 5.1.1, and I installed the iCloud Control Panel. When trying to set up iCloud with Outlook, it connected fine for my emails to sync, but my calendars and contacts won't. Instead, I get a message display that says
     "Restart Outlook with Mail enabled before turning on Calendars & Tasks or Contacts.
          You need to add your iCloud Mail account to Outlook before Calendars & Tasks or Contacts can be set up."
I had already set up my iCloud Mail account with Outlook prior to my attempt to connect it, and I retried it three times. I looked on the Apple iCloud support site for suggestions, and I followed all of them, including shutting down my computer and restarting it, confirming that the add-in was active in Outlook, and closing and reopening both Outlook and the iCloud Control Panel. Nothing seems to work, and each time I attempt to make the connection, I keep getting this message. I never had this problem with MobileMe working, and everything synced perfectly with MobileMe, but so far, iCloud has been nothing but a disappointment. Any ideas on what to do to fix this issue? Oh, and it also deleted all of my calendar information from my Outlook, and I have no clue where it went. I still have it all in my iPod, but it is not in Outlook anymore. I still have my contacts in Outlook. I know that some people have had problems with that disappearing too. Please help if you have any clues or advice.

Update:
    So I figured out how to get the calendars to sync. I temporarily changed the default email account in Outlook to my @me.com email and it worked fine. All the calendars synced great, and I haven't had any of the nightmare problems others have talked about syncing their calendars. But, the contacts still won't sync, and I get a new message that says
"Outlook Setup Error
        Your setup couldn't be started because of an unexpected error."
Any ideas on what to do to fix this problem?

I lost connection with the server while downloading an audio book how do I restart the download without paying again?

I lost connection with the server while downloading an audio book how do I restart the download without paying again?

Go into the App Store, tap Updates, and at the top should appear Purchases. Hit the tab that says "Not on this iPhone" to download again

I am having much trouble with the new reminders in IOS7 and how it interacts with Outlook Exchange. Many features lost in the new version.

When I downloaded IOS7, I found that the reminders/task app and how it interacts with Outlook Exchange is much more difficult to use. Some of the issues that I am having are...
1. Trying to edit my task on my phone is not possible, if the notes are lengthy. When you click on the text to edit data near the top, it will scroll to the bottom and not allow you to edit the text because you cant see it.
2. Now all of my task are in one long list. I can not move from day to day like we could in previous version IOS6
3. When I do edit a short task reminder and click done, it crashes and completly goes away. It does save the edit though
4. You can only add task at the bottom of each days reminders. This is very inconvient and much more difficult than IOS6
5. There is a major delay or latency when interacting inside of reminders in this version. Much more than IOS6. It is very unstable and quirky.
I have never seen Apple take a step back with a product until now. I am a huge Apple fan and always will be, so I am hoping they make enhancements to fix these issue. It is a big time prodcutivity killer.
Thanks for any and all help you can give.
Troy Meachum

Some power supplies or designed so that if there is a short or overload they shut them selfs off and some will not turn back on. Some have a relay that will click back on and work, some you have to cycle the power switch. Those that won't come back on will have to be replaced. I'm not saying that yours is that type as I have no way of telling. But if you have a friend who will loan you a good power supply you might try it. As someone else said just turning off the power will not darn all the power from some motherboards. To test this turn off your power supply than turn on the computer with the start botton. Mine will flash the lights and fans will start to spin than die. So every time you turn off computer to work on it. After turning off PSU hit the start botton to drian any power left in it before working on it. Also do this after unplugging it just to make sure.

HT1296 what if you dont have a computer to download iTunes then how can i restart my iPod?

what if you dont have a computer to download iTunes then how can i restart my iPod? because my iPod is telling me to hook it up to iTunes but there is no way for me to do that if i cant download it on a computer i dont have..

You need to connect the iPod to a computer with iTunes and an internet connection and restore via iTunes
iTunes: Backing up, updating, and restoring iOS software

My kids desabled my mini ipad after several tries to log in. My computer that I used to sincronize it doesn't work anymore and i can't connected to itunes.. How can i restart it without the actual computer that I used before??

My kids desabled my mini ipad after several tries to log in. My computer that I used to sincronize it doesn't work anymore and i can't connected to itunes.. How can i restart it without the actual computer that I used before??

You can use any computer but your data will be lost if you have no backup.

"The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook" in Exchange 2013

In Exchange 2013, Outlook finds a new connection point made up of the user’s mailbox GUID + @ + the domain portion of the user’s primary SMTP address. This change makes
it much less likely that users will see the dreaded message “Your administrator has made a change to your mailbox.”
http://technet.microsoft.com/en-us/library/dd298114(v=exchg.150).aspx
Although the error message in the topic has been already improved a lot in Exchange 2013, the users may still encounter them in some specific scenarios. We have collected them and let’s discuss them in this thread.
Symptom
=======================================
Consider the following scenario:
Exchange 2013 was installed for a migration from Exchange 2007/2010.
The legacy Exchange server is removed after successful migration.
Exchange 2013 may be updated to Exchange 2013 SP1.
Some users were being randomly prompted with a popup in their outlook client with the following message when connecting with Exchange 2013 server:
“The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook”
Cause
=======================================
The issue may be caused due to Public Folders.
The msExchHomePublicMDB attribute on Exchange 2013 databases was set to deleted legacy public folder object.
Solution
=======================================
Removed the Public Folder from all the Exchange
2013 Databases. To do it, we can use ADSIedit.msc and remove the arrtibute - msExchHomePublicMDB from all the Databases:
1. Open ADSIEdit.
2. Connect to the Configuration container.3.
Expand Configuration, expand CN=Configuration,DC=Domain,DC=com.4. Expand CN=Services -> CN=Microsoft Exchange -> CN=Domain -> CN=Administrative Groups -> CN=Exchange
Administrative Group -> CN=Databases.5. In the right hand pane you will see a list of databases.6.
Right-click the listed database object -> Properties.7. Check whether the msExchHomePublicMDB value is set to an unavailable value. If you see reference to the old database,
please clear the value.8. Click OK.9. Check the rest of the databases to make sure
that they are not populated in the same way.
References:
https://social.technet.microsoft.com/Forums/en-US/2f736bdd-1c00-4a22-97a5-95faeadf1495/exchange-2013-sp1-users-randomly-prompted-with-the-microsoft-exchange-administrator-has-made-a?forum=exchange2010
https://social.technet.microsoft.com/Forums/lync/en-US/7a7b3cf8-8761-421c-9d55-6c84e05531c0/the-administrator-has-made-a-change?forum=exchangesvrclients
https://social.technet.microsoft.com/Forums/en-US/0d71c843-b662-493c-ab6e-30708929ef18/2013-sp1-problem-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and?forum=exchangesvrdeploy
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

This one? http://support.microsoft.com/kb/2934750

The Microsoft Exchange administrator has made a change that requires you to quit and restart outlook.

Then I get this once outlook is open:
Cannot start Microsoft Outlook. Cannot open the Outlook window. The set of folders cannot be opened. The operation cannot be performed because the connection to the server is offline".
Outlook 2013 client
Exchange 2010 SBS
I have recreated the profile, doesn't work. Recreating the OST doesn't work. Starting Outlook in any safe mode doesn't work. Disabling hardware acceleration and add-ins does not work.
repair account does not work - I get the Congratulations message, confirming it was able to get everything from the server... and when I restart Outlook:
"The Microsoft Exchange Administrator has made a change that requires you to quit and restart Outlook".
BJN
Also the user in question is not getting new mail.
And I have tried this
outlook /resetnavpane to no avail.

Hi,
Please confirm if the issue happens to all users in your Exchange server.
In client side, please check the Connection Status when the issue occurs:
Please open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar –Connection Status to check the connection.
Please notice the Server name, status, protocol and Type information.
In Exchange server, please check whether all Exchange services are started and running in Exchange 2010. Also check whether there is any error information in Event Viewer.
If the issue only happens to one user, please update the Outlook client with the latest patches and service packs to have a try.
Regards,
Winnie Liang
TechNet Community Support

HT1661 How can I restart my mac book pro 11 inches when it's on target disc mode

How can I restart my mac book pro 11 inches when it's on target disc mode

Even if you could open Disk Utility you can't reformat a disk while you are booted from it. You will have to use the install CD. Ring the Apple Online Store at the number given at bottom left of this page and give them the serial number of your Mac. You should be able to get the Snow Leopard install disks for a nominal fee.

How do i import outlook email addresses to iphone and send as a SMS text messages

How do i import outlook email addresses to iphone and send as a SMS text messages?

You can send a message through an email gateway so that it appears as a text on someone's phone. However, it's not their regular address. For example, for a Verizon customer, it would be [email protected] Perhaps that's what you're thinking of?

How do i restart outlook

Similar Messages

Maybe you are looking for