How do I restart setting on a WRT54G Ver. 6

I think I messed around with the settings, is there a way to restart the whole thing??

reset button is on the back...just press it for 30 secs...it should get back to defaults
"You tried your best and you failed miserably! "

Similar Messages

Need alot of help setting up a WRT54G ver.6

Ok, all i have is the router, (WRT54G Ver. 6 - Wireless G Broadband Router) Ive lost the box it came in, and everything with it. (I also have the power supply & 2 cords) A friend of mine setup everything for me at my old apartment, but Ive moved and have to do everything on my own this time.
At my old place my computer was the central computer where the broadband modem was, my roommate had a wireless usb card of some kind, that allowed him to connect to the network.
This time i have to have another computer as the central comp and i need a wireless usb card myself. I dont know what kind to get and how much it will be, any suggestions.
I also dont know how to set everything up, and what type of hardware/software i will need, i was hoping all the drivers and sofware would be online but im not sure. Im not sure if the computer here needs a different network card or something similar either.
Im also worried about how my computer is already setup, will i have to delete and redo all the settings already in effect, how do i do all this stuff
Any advice would be very appreciated, i know nothing at all, not even what wires plug into what.

setup modem connected to the internet port on the router and pc to the regular port on the router...reset the router for 10sec. then turn if off for the same amount of time while the router is off turn the modem as well.whats the model of your modem?

How set up my wrt54g v6 as access point

Hi i want to set up my wrt54g v6 to get wireless signal from my wrt54gx2 router 100 feet away. thanks.

Your WRT54G is not designed to do this, at least not with Linksys firmware. Perhaps you can find some 3rd party firmware to do this, however, if you load 3rd party firmware, it will void your Linksys warranty.
Most Linksys routers are designed to generate a wireless network, not connect to an existing wireless network.

TS1363 how can i restart my 2004 ipod click wheel?

How can i restart my 2004 model ipod (click wheel) on my computer and on my itunes?

Connect the iPod nano to the computer the exact same way you set up the old one. You don't need to create another Apple ID, iTunes Store account, or iTunes library.
(98196)

HT5312 how do i re-set my screen password? ive been locked out. i know Apple id & password.

how do i re-set my screen password?

A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to
         update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

How do I restart the SNMP agents with the original command line options?

I'm creating an application that changes the SNMP trap target configuration files and then restarts the SNMP agent. I'm currently working with the mibiisa agent. I want to make sure that I restart the service with the new trap targets but with the original command line options. How can I restart the mibiisa service with the same command line options that it originally loaded with?

It is not "Network Time" that is the problem, but actually "SystemStarter." SystemStarter is an interim kludge to enable the work or the old StartupItems until they can be converted to LaunchDaemons or LaunchAgents controlled by launchd. Launcd calls SystemStarter to launch all the unconverted StartupItems. ntpd is now under the control of launchd directly.
Launchctl is the command to load and unload the plist files, but I don't think it has a mechanism to restart a daemon.
There are start and stop commands in launchctl, but the man page indicates that they are for debugging purposes.
I also imagine you could just kill the ntp daemon and let it restart with new settings. It is most likely set to "keepAlive" so that it will automatically restart.

How can I choose the time in WRT54G

Hi
Problem:
How can I choose the time in WRT54G?
Data:
WRT54G v5.1, firmware 1.0.9
Thank you for your attention

I don't think that you can actually "choose the time" on your router, that is, you cannot set it to an arbitrary time. The router's clock is set from the internet.
However, you can choose your "time zone" and whether or not to use "daylight saving time". To do this, open your web browser and point it to address 192.168.1.1. Enter your router password. This will take you to your router's web setup page. You can set the time zone on the bottom of this first page. Then click "Save Settings". Exit your browser. When your router has internet access, it will set itself to the correct time.

HT4796 If I have to cancel, how do I restart?

I started trying to migrate my files from my old Windows PC to my iMac but it was interrupted and I had to cancel it. How can I restart the transfer? On my iMac it's been saying that there's 4 hours and 32 minutes left for hte last 30 minutes. Nothing is showing up on my PC.

Is thera simple rule of knowing which of these should be kept?
I'd first of all look for the audio quality of the files - sample rate, bitrate and keep the files with the highest quality. Then look at the tags you added; keep the files where you have set comments and grouping tags. And if you still have more than one file to keep, keep the ones with a simple cloud, that have been successfully uploaded, not the crossed out inelligible files or duplicate files.

My iPhone got locked while updating to IOS via my laptop. How can I restart my phone

My iPhone got locked while updating to IOS via my laptop. How can I restart my pihone?

Thank you Roger Wilmut. I am grateful for your response.
I bought the iPhone new and set up by myself. I still remember apple id details. The problem is that while the update was on, I needed to enter my apple id on the phone to complete the update my screen lock has been activated. Now the phone only displays the iTunes logo and the USB cable being inserted. But I can still access my the phone contents through my laptop. I need to force the phone to restart. How can I do that? mind you I have pressed the home and power buttons together for a couple of minutes. It will only display the apple logo for a few seconds and then return to the iTunes and USB cable display. Maybe the phone is hanging. So please help me.
Thank you very much

WRT54G Ver.2 Trying to set up Online gaming.

I will give an exact detail on what I am trying to do, so it will help you all determine my problem.
I have a Wireless WRT54G ver.2 router and my buddy has the same type of set-up.
I am trying to set up an online game with my friend playing Command & Conquer Generals Zero Hour. When we set-up our game, both of our IP's are the 192.168.1.XXX. I try to connect to his I.P., but it tells me "Connection timed out". We have tried to disconnect the router on his end, and it still gives the same error. When I go into the options in the game, it says my I.P is 192.168.1.100. How can we connect if we are both using routers that have this similar IP. It is a pain in the @$$ to have to disconnect both of our routers just to get a few games in. So this is my situation, and I hope this is enough info to help me out. Thanks in advance. ~Donte

Hi there!
You need to forward ports (by doing port forwarding on your router) first so it can pass the router's firewall...and by the way, the IP address the game is referring to is the public "Internet" IP address which is on the status tab of your router. For the forwarding instructions click here
"The war between heaven and hell depends on the choices we make, and those choices require sacrifice. That's the test"

HT204053 The entire family has used one itunes account for years. How do we all set up separate iCloud accounts now?

The entire family has used one itunes account for years. How do we all set up separate iCloud accounts now? Or should we? 5 macbooks, 2 ipads, 4 iphones, 2 itouch, 2 imacs. How does one decide what to sync, share and what not to? Green Jeans.

You need to start by understanding the distinction between iTunes and iCloud - Apple confuse the issue by referring to 'iTunes Match' as part of iCloud. It isn't.
You don't have to have the same login (Apple ID) for iTunes and iCloud; many people don't and there's no problem about it.
Your iCloud ID gets you email, calendars, contacts, iWork documents and PhotoStream syncing between devices.
Your iTunes ID gets you the iTunes Store, the App Store for iOS, the Mac App Store for OSX,, 'iTunes in the Cloud' (downloading of purchased items to any logged-in device) and 'iTunes Match' (uploading of songs not purchased in the iTunes Store).
Your family members can easily each get their own iCloud account to keep email etc. separate - in each case they will need a different non-Apple email address (a free one from Yahoo etc. would do) to set up the ID. If they are sharing a Mac they need to be using a separate user account.
They can have their own iCloud accounts and still all sign into the same iTunes account: or they can open their own iTunes accounts using their new iCloud Apple IDs.
BUT they cannot transfer items purchased under the present iTunes ID to different iTunes IDs.

I lost connection with the server while downloading an audio book how do I restart the download without paying again?

I lost connection with the server while downloading an audio book how do I restart the download without paying again?

Go into the App Store, tap Updates, and at the top should appear Purchases. Hit the tab that says "Not on this iPhone" to download again

HT1296 what if you dont have a computer to download iTunes then how can i restart my iPod?

what if you dont have a computer to download iTunes then how can i restart my iPod? because my iPod is telling me to hook it up to iTunes but there is no way for me to do that if i cant download it on a computer i dont have..

You need to connect the iPod to a computer with iTunes and an internet connection and restore via iTunes
iTunes: Backing up, updating, and restoring iOS software

My kids desabled my mini ipad after several tries to log in. My computer that I used to sincronize it doesn't work anymore and i can't connected to itunes.. How can i restart it without the actual computer that I used before??

My kids desabled my mini ipad after several tries to log in. My computer that I used to sincronize it doesn't work anymore and i can't connected to itunes.. How can i restart it without the actual computer that I used before??

You can use any computer but your data will be lost if you have no backup.

HT1661 How can I restart my mac book pro 11 inches when it's on target disc mode

How can I restart my mac book pro 11 inches when it's on target disc mode

Even if you could open Disk Utility you can't reformat a disk while you are booted from it. You will have to use the install CD. Ring the Apple Online Store at the number given at bottom left of this page and give them the serial number of your Mac. You should be able to get the Snow Leopard install disks for a nominal fee.

How do I restart setting on a WRT54G Ver. 6

Similar Messages

Maybe you are looking for