How do I restore my Admin status for a program in Applications using 10.6.8

How do I restore my Admin status for a program in Applications using 10.6.8?

Is this the file that does not have the desired priveleges? I think that's correct. If so, then open Terminal in the Utilitie folder. At the prompt enter:
sudo chown -Rf root:admin [dragged file goes here]
Leave a space after "root:admin" and drag the file you need to change into the Terminal window. Press RETURN. You will be asked to enter your admin password. It will not be echoed to the screen so type carefully. Press RETURN again.
This will change the priveleges of the file to the default for the Applications folder.

Similar Messages

Admin Status for Rogue AP

Hi ,
We have 1242-AG series AP which is configured in Rogue Detector mode. After adding this AP to WLC its showing Admin Status of AP as Down.
When i am trying to enable the Admin Status its giving me following error
" Admin status cannot be enabled for AP in Rogue Detector mode".
Any suggestions on how to enable Admin Status for Rogue Detector AP.
Thanks
Prasad

Rogue Detection under Unified Wireless Networks
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080722d8c.shtml
This may help along with Steves answer

How can i restore the account code for Hotspot shield?

I bought the Hotspot shield vpn from iTunes to use it on my iPhone using my credit card . i cant find the email sent to me when i did the purchase, so i dont have the account number to activate my version. also i cant see the settings for application in iphone. how can i restore the account code for Hotspot shield?

Try this:
https://www.hsselite.com/support.php#section17
Regards.

Hi! How can I change the shipping address for the program of replacement of the 1 generation ipod nano? I've already received the empty box and now I should send back the old ipod but I'd like to receive the new one to another address. Thank you.

Hi! How can I change the shipping address for the program of replacement of the 1 generation ipod nano? I've already received the empty box and now I should send back the old ipod but I'd like to receive the new one to another address. Thank you.

I would contact Apple directly and have them work with to get the iPod shipped to a new/different address.
http://www.apple.com/contact/
B-rock

I lost my serial number for photoshop elements11 and premiere elements 11 combo. how can I obtain a serial number for this program?

I lost my serial number for photoshop elements11 and premiere elements 11 combo. how can I obtain a serial number for this program?

If you registered the software you should be able to find the serial number thru your Adobe account online.
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html

How to pass IN parameter as BOOLEAN for concurrent program in Apps(Environ)

hi all
i am using a standard package procedure,where in which i need to pass some parameters to a procedure,
some of the parameters there are BOOLEAN type ,can anybody help me to know , How to pass IN parameter as BOOLEAN for concurrent program in Apps(Environ)

Already answered this on the SQL forum (How to give IN parameter as BOOLEAN in a concurrent program.

HT3702 I have paid once for one month subscription for al jazeera sport live app. I just released after few months that they are automatically charging me on monthly bases. How i can stop them charging me for something i did not use and i did not authoriz

I have paid once for one month subscription for al jazeera sport live app. I just released after few months that they are automatically charging me on monthly bases. How i can stop them charging me for something i did not use and i did not authorize?

You possibly set up an auto-renewing subscription with the app - there are instructions on this page on how to manage them, including how to stop them : http://support.apple.com/kb/HT4098

How do u find logical datanase exist for ur program requirement?

How do u find logical datanase exist for ur program requirement?

Hi,
The transaction Code SE36 is where you can find all the Logical Database that exist in the SAP system. You can find the existing logical database that exist and can use which ever that suits your needs.
Logical Databases are mostly used in HR ABAP and in HCM Reports.
Thanks,
Samantak.
<b>Rewards points for useful answers.</b>

How do I restore a file to iTunes after I deleted it using Keep File?

I wanted to shorten the list of visible files in my laptop's iTunes Music folder without losing the actual music. So I selected Keep File. Now I want to bring some of that music back.
How do I restore a file to iTunes after I deleted it using Keep File?

Assuming the track file is still there, either use the Add To Library command under the File menu in iTunes and select the tracks you wish to add back into the iTunes library, or find the track files on your hard drive and drag them into the iTunes window.
Regards.

How do you set up a password for a wireless network when using an Airport Extreme?

How do you set up a password for a wireless network when using an Airport Extreme wireless router?

Thanks for the updated information.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Manual Setup
Click the Wireless tab below the row of icons
Check to make sure that the setting for Wireless Security reads either WPA2 Personal or WPA/WPA2 Personal
Enter a Wireless Password and Verify Password
Click Update to save any changes and wait a full minute for the AirPort Etreme to restart

How to assign a new transport request for a program saved in $tmp mode

Hi all,
How to assign a new transport request for a program saved in $tmp mode?

Hi,
delete the object fro the package $tmp.
go to change mode, save it.
while saving it will ask for teransport id.
thanks
vinod

How do i restore/reset Admin console password

Hi
Here is the scenario
1. i install a new Sun Directory Server 5.2 in my development Server ( Solaris 10 )
2. i set admin/password for my admin console password
3. i backup the data from UAT server using
- ./saveconfig
- ./db2bak
then transfer over the file to my development server
4. i do ./restoreconfig
and ./bak2db
5. the development ldap server is up and running
BUT somehow the password for admin console get overwritten
by the config i extract from UAT Server ( which i dont know the password for admin console in UAT server )
how do i reset/restore the admin console password?
Thanks.
can i just do ./bak2db without doing restore config to restore the data??

hi,
stop the slapd process,
go to the config directory of your server and open the dse.ldif with a editor,
serach for 'nsslapd-rootdn' and 'nsslapd-rootpw',
you will find your ldap manager account, should be something like:
nsslapd-rootdn: cn=Manager
an his password:
nsslapd-rootpw: {SSHA}lrSK6wJmZMBBg/jOdCd/fxKf+hhUfaFQFCpLFw==
generate a new password with:
./getpwenc <encryption scheme> <password to encrypt>
./getpwenc SSHA newsecret
{SSHA}cwn+TWDDcex1nJgA1QxkWJN/V+hWTytPyCZTbw==
the 'getpwenc' script is located in the slapd-<hostname> directory of your server-install-directory.
take the new generated pasword and replace it with the old one in the dse.ldif.
don't forget to make an extra backup of the dse.ldif!

How can I get AirPort Admin Utility for Graphite and Snow 4.2.5 to work with OS10.6?

I've upgraded to the latest version of Mac OS and now AirPort Admin Utility for Graphite and Snow 4.2.5 won't run. Any suggestions on how to either run this utility or otherwise get access to my old Snow Dual Airport via another method? Airport Utility doesn't see the device, despite repeated scans. My computer and iPad connect no problem to the device, but both iPod and iPhone won't take and hold an IP address. (If any one can help me solve this issue, I can live without access the Airport.)
Thanks,

I've upgraded to the latest version of Mac OS and now AirPort Admin Utility for Graphite and Snow 4.2.5 won't run. Any suggestions on how to either run this utility or otherwise get access to my old Snow Dual Airport via another method?
Unfortunately, you will need another Mac running a much earlier version of OS X to be able to install AirPort Admin Utility and make any settings chances to the router.
Since the normal life of a wireless router is around 5-6 years of use, now might be the time to consider a new router that will provide far better performance than the older Graphite/Snow AirPort.

DBI: How can I reverse purge pending status for a Plan snapshot?

Hi,
I erroneously set a plan snapshot to purge. It's status is now "purge pending". I know that the purge will be effective with the next running of incremental concurrent for Plan Management dashboard (DBI).
Anybody knows how can I reverse the snapshot status to Active and prevent the purge of it?
Thanks, AC
Edited by: user591378 on 13-nov-2008 7:03

Hi,
I erroneously set a plan snapshot to purge. It's status is now "purge pending". I know that the purge will be effective with the next running of incremental concurrent for Plan Management dashboard (DBI).
Anybody knows how can I reverse the snapshot status to Active and prevent the purge of it?
Thanks, AC
Edited by: user591378 on 13-nov-2008 7:03

HT201269 I have lost my iPhone 3GS. It was backed up to my computer using iTunes. I now have a new iPhone 4 series from a friend. How can I restore the backup information for my previous phone to the new phone?

I have lost my iphone 3GS. It was backed up to my macbook pro using itunes. I now have a new iphone series 4 (china model). How can I access the backup information for my old phone and put it on my new one?

Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone

How do I restore my Admin status for a program in Applications using 10.6.8

Similar Messages

Maybe you are looking for