How do I restore my iPod Touch that only turns on when plugged into the wall?

I found my old iPod Touch 4th generation in my backpack, and my backpack went through the wash, (It shouldn't of been too bad since it was in the side pocket) but it goes dead instantly as soon as I take it out of the wall charger, and it does not turn on when I plug it into my computer. It also has a pass, (That I forget) so I need to restore it. Is it possible to restore it without connecting it to a computer?

No. You have to connect the iPod to a computer with iTunes to restore the iPod.
Did you throughly dry the iPod before you started try to use it?
If not try by
How to fix a wet iPod or iPhone | eHow.comfix-wet-ipod-iphone.html

Similar Messages

My ipod 5th gen wont charge or turn on when plugged into the wall or on my docking station

I have had my iPod for around a year now and it has been perfectly fine........until now. I came home from work to find my iPod was turned off, I assumed that it had just run out of charge. I plugged it in to charge using the power adapter and nothing happens when I put it to charge on my docking station?
Can anyone help? Or does it look like a new iPod is on the cards?
Thanks

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

Sorry i mistakenly made this question. It was alright. No Problem At ALL

HT4972 My ipods screen is black and wont turn on unless plugged into the wall

My ipods screen is black and wont turn on unless plugged into the wall not the computer but when i plug it into the computer and put it in DFU mode it wont restore there is an error 3194 and error 1602 and nothing i do helps

Here's what I found about error 1602:
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert,update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3194 is also seen when somebody is trying to restore jailbroken devices.

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

IPod classic won't turn off when plugged into a home theater dock; what's up? will it hurt to leave it on all the time?

I bought a new iPod Classic and it won't turn off when plugged into a home theater dock. Is this normal and will it hurt the iPod if i leave it on all the time?

Hi there,
How old is your Classic? Often, after a couple of years, rechargable batteries begin to fail, especially after such a long period of inactivity. This happens with any gadget with this type of battery.
Try leaving it plugged in for 24 hours, and try again, to rule out that it isn't just really low on charge. If this doesn't help, it may be a good time to buy a replacement. New iPod Nanos and Touches will be released this October.
Below, I've linked to an Apple website which explains rechargable batteries, and why yours may not be working.
Apple - Batteries
I hope this helps, and I hope upgrading your device will not feel like an unnecessary expense. Let me know if you have any more questions,
Nathan

My ipod nano 6th gen will only turn on when plugged into a power source.

My ipod nano 6th gen ONLY turns on when it is plugged into a power source. As soon as I unplug it, it turns off. I also tried to reset it and it did not help. Any suggestions?

Howdy mela1223,
If I understand correctly your iPod will not stay on unless you have the charger plugged in even after resetting it. Normally this would indicate a hardware issue that would need a repair but to cover all the bases before that, the last troubleshooting that can be done for it would be to restore it with iTunes on a computer.
Restoring iPod to factory settings - Apple Support
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
Thank you for using Apple Support Communities.
Take care,
Sterling

I need to boost my wifi signal from my Time Machine. What is that device called. it plugs into the wall.

I have an apple booser that plugs into the walll to help boost my wifi signal. I went and purchased another one and they sold me the airport express and it does not have the wall plugin. What is it that I need to exchange it for? You would have thought they would have sold me the right thing!

Does the old still a good product?
Yes
So, this is all there is all there is available to boost my signal in hard to reach areas with Apple devices?
You could try an AirPort Extreme instead of an AirPort Express. The issue may be size. Imagine eight of your A1392 models all stacked on top of each other. It does have a better antenna setup, but I doubt that you would notice much improvement in your situation.

How do you restore an ipod touch that has a passcode lock on it that was a previous owners ipod and was recently purchased

Hi, I just purchased an ipod touch for my son and it had been opened so there was a discount on the phone, now it won't open because the person who had it before put a passcode on it and I can't get it to show up in itunes. How can I just restore it and start fresh? Do I have to take it into an apple store? Thanks for the help.

Place the iPod into recovery mode using the instructions in this Apple support document and restore it factory settings.
http://support.apple.com/kb/ht1808
B-rock

Why does my ipod touch 5th gen not charge when plugged into my computer? (it keeps stuttering(lightning symbol next to bettery goes on and off literally every second))

so I have my ipod touch 5th gen connect and the little lightning symbol, next to the battery on the top left, keeps flashing on and off every second. I don't know what to do and also it doesn't show up on iTunes.

Hey Ed, Try trouble shooting 101. Do you have a different cable and/or charging device? If so, try the different cable first, then a different charging device. If the problem goes away, I'd say it's the cable, replace it. If with in 1 from date of purchase, Apple will replace for free if the cable is found to be defective. If the problem continues with a different cable or a different charging device, then the problem is with your iPod. With a strong light and a magnifying glass look in the iPod's charging port. Your looking for damage in and around the port. Is the port lose? (shouldn't be). Are pieces missing or damaged? Bent or damaged contact pins can do what you describe. Foreign debris, namely pocket lint or corrosion can also cause charging issues. If you see something like lint, try to blow it out, or if you must use a non-conductive probe, I find a round wooden toothpick works well to carefully remove the lint from the bottom of the port. Just be careful to not touch, bend or damage the gold contact pins on the long side of the port. Also make sure the locking pins on the short ends (looks like two silver bumps, one on each end) of the port are free to move. If you find corrosion, try plugging / unplugging about 12 times to clean the contacts off. If you must use a cotton swab cut to fit, with a drop of 91% isopropyl alcohol on it, you want it damp, not wet, then plug it in and out until the swab comes out clean. You will most likely need several swabs. If you find nothing physically wrong, then try resetting your iPod. If that does not work, restore from backup, last resort, make a backup then restore to new, a full factory restore. If issue continues see your Apple store and have it evaluated for a possible hardware issue. But start with a different or new cable. Good luck, Cheers.

New ipod touch doesn't turn on when plugged in

i just bought my ipod touch yesterday. when i plugged it into my imac using the usb cable, it doesn't turn on to show that it's charging like my nano does when it's turned off. i had to turn the touch on before i could see the huge green battery icon. is there something wrong with my ipod touch? i read on other forums that it should 'turn on' to show the battery icon charging when i plug in an ipod that's turned off. i can't find any answers to my question elsewhere.
please help! thanks so much!

Try after being connected to a charging source for at least an hour:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My ipod touch will not turn on when plugged in or when I press the power button. I need to send it in for reapir, but I need the serial number. Any round about solutions?

The back of the Ipod is warn so I can't see the serial number, so please let me know if you know anything that would help.

- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
To find SN:
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

My Ipod touch will not turn on unless plugged into a dock

When I try to turn my Ipod touch on, the apple will show up and then shut down.....I found that it will turn on and work if it's plugged in on my music dock, but the second I take it off it goes dead, even though it says the battery is full.
I'd appreciate it if anyone has any suggestions!

Have you tried the standard fixes:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If you still have the problem then you likely have a hardware problem like a bad battery.

How do i fix my screen because my screen is white and my ipod 4th gen only turns on when connected to the charger

i dont know how to fix it the screen is white and it only plays when connected to the charger and the worranty has expired so i cant get a new one?????????!!!!!!!!

did anything work

How do i fix my ipod touch that wont turn on?

my ipod youch was completly dead. wen i went to recharge it i let it charge for over an hour and when i try turning it on it will go to the screen with the apple logo but it wont go any further than that. how would i fix this problem

Try here:
iOS: Not responding or does not turn on

How do I restore my iPod Touch that only turns on when plugged into the wall?

Similar Messages

Maybe you are looking for