How do I restore System Restore?

How do I restore System Restore? I am running Firefox 17.0 on Windows XP SP3.

The pop-up asking if I wanted to upgrade to FF 17.0 had a link to a warning that it might disable System Restore. I clicked “No” for the update not wanting to lose System Restore but 17.0 somehow loaded anyway. Since Mozilla techs knew that 17.0 could cause System Restore problems, I am hoping they will know how to fix them.

Similar Messages

  • HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

    Hi,
    I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
    So basically here are my 2 questions:
    How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
    How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
    Any solutions are very much apreciated!
    Thanks!
    I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
    And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

    WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
    http://www.twocanoes.com/
    Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
    During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
    http://www.paragon-software.com/downloads/demo.html
    I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
    OS X
    Windows
    Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
    https://support.apple.com/kb/HT1427
    https://support.apple.com/kb/HT1553
    There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
    AppleHFS - the abilty to mount and read HFS volumes can be notorious.
    I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

  • How to Use a System Repair Disc to Restore Windows 7

    Hi ! Please start here!
    http://www.dummies.com/how-to/content/how-to-use-a-system-repair-disc-to-restore-windows.html
    http://forums.toshiba.com/t5/Computer-Troubleshooting/What-can-I-do-if-my-Windows-7-or-Windows-Vista...
    http://forums.toshiba.com/t5/Windows-8-Knowledge-Base/What-can-I-do-if-my-Windows-8-laptop-won-t-sta...
    http://pcsupport.about.com/od/toolsofthetrade/ss/windows-7-startup-repair_2.htm
    PS Please read all these links and then post back here with your complete model number found on the bottom of your laptop and complete information to what you have tried to get your PC working I would love to spoon feed everyone. It's just not possible.
    Dokie!!
    PS2 Now read this and see if any thing here helps.
    http://forums.toshiba.com/t5/Computer-Troubleshooting/FYI-Recovery-to-Factory-Settings-Toshiba/td-p/...
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
    Attachments:
    Capture40.JPG ‏238 KB

    Hi! I found this on the form!
    http://forums.toshiba.com/t5/System-Recovery-and-R​ecovery/How-To-Understanding-System-Recovery-Optio​...
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

  • I have lost my toolbar and task bar. I have tried all the sugestions on this site to no avail. I don't know how to try a system restore with out them.

    I was enlarging pictures on Facebook to full screen. When i went to move on. All my tool bars and my task bar have disappeared. I have tried all the suggestions on this site to no avail. I don't know how to do a system restore without my task bar, and don't want to lose my book marks. Please help, i can't grt to my important favorite sites.

    Can you launch a new window (Ctrl+n for a normal window, Ctrl+Shift+p for a private window) that has the usual complement of toolbars? If a new window also is missing bars, try using the View menu > Toolbars list to restore them. If the classic menu bar is not displayed, usually tapping the Alt key or the F10 key will show it temporarily.

  • How do I restore a system from an older time machine backup?

    How can I restore my full system from a time machine backup using a "snapshot in time" older than the most recent time machine backup?
    For context: I am doing work on my machine that required making a full backup (in time machine), working on the computer, then doing a full restore. Unfortunately, when I briefly connected the my external disk during step 2, time machine started and added a "newer" backup than the one I need to restore. Any advice?
    Thanks!

    Recover your entire system
    Time Machine – Revert to Previous OS

  • How do I Restore from Time Machine after I have reinstalled my system software (Snow Leopard and then Lion) ?, How do I Restore from Time Machine after I have reinstalled my system software (Snow Leopard and then Lion) ?

    I have never done this before, so can someone explain in detail how I reintall my system software and then restore from Time Machine please ?

    Your profile indicates that you currently have an older version of Snow Leopard (10.6.2).  In order to install Lion, a prerequisite is the latest version of Snow Leopard (10.6.8).  Perhaps a few more details would be helpfull in solving your problem. ex. If all you want to do is to upgrade to Lion, a restoration of data is unneccessary.  Download the latest version of Snow Leopard and then download (purchase) and install Lion.  User data will remain intact.
    If I am missing something, please elaborate.
    Ciao.

  • How do I restore sound on this system?

    I have a a Compaq Presario SR2037X that I got from a family member.  I have only the system itself, no driver discs or anything.  I put in a new HDD and graphics card, and I installed WIndows XP onto a clean drive.
    Right off the bat, the system couldn't utilize any of the hardware on the board.  I found most of the drivers at this page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=33033...
    and installed them to restore most functionality.
    The sound drivers required an additional driver for "HD Audio," which I found elsewhere.  Yet when I then ran the driver-installer on that page for the audio, it unpacked a bunch of stuff and then closed, never even saying it was successfull in its installation.  I was left with four or five identically-named audio devices showing up as unknown devices in the device manager, plus a few other unrecognized audio componants.
    I next installed the drivers for my graphics card, (which is by nvidia, same as all the built-in fixin's on the MoBo,) and the drivers it installed *seemed* to fix those audio drivers, as now the device manager recognizes them ad Nvidia audio devices.  (Once again, a list of four identically named devices in the device manager.)
    However, I still have no sound.  When I open up the "sounds and audio devices"-properties in the control panel, it simply says "No audio device" and has all the controls greyed out.  Under the hardware tab it lists the nine sound controllers I can see in the device managerm and they all claim to be working properly.
    I do not know where else to find proper drivers for this built-in sound card.  (I found several sites I've never heard of before that offer updated drivers, but I don't trust them.)  I do not know how to get the system to properly recognize and operate what it already has.  I do still have the original hard drive available, and could copy files from it if I had knowledge of what exact files are needed.  How do I get sound working on this system?

    Hi:
    I recommend you reinstall XP and load the drivers from scratch using the links I have provided below.
    Chipset.  Install first and reboot. That should also install the network card.
    http://www.nvidia.com/object/nforce_winxp_15.26.html
    Next, install the graphics driver and reboot.
    http://www.nvidia.com/object/winxp-285.58-whql-driver.html
    Audio driver.  Accept the agreement. Download and install the 6th one on the list (first one in green).
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
    If you installed an add on graphics card, you will need the drivers for that.  If your add on graphics card has HDMI out, it disabled your onboard audio.
    The fix is simple. Go into your BIOS. Look for the onboard audio setting. Change it from Auto to Enabled. Save the setting there and again when you exit the BIOS.
    You should now have onboard audio.
    Paul

  • How do I restore my system using Time Capsule?

    I've just had my 1TB hard drive replaced under the Seagate replacement scheme.  Now I've plugged it all back in, how do I restore my system using my Time Capsule?

    What files are you trying to restore?

  • I lost my iphoto application how i can restore it? i am not having system restore disk. how i can get my photos back?

    i lost my iphoto application how i can restore it? i am not having system restore disk. how i can get my photos back?

    If the iPhoto application is no longer on your hard drive (do a search to be sure it didn't just get moved to an unexpected place), there's no way to get it back without either backups or a copy of iPhoto.  Your original disks that shipped with the machine would have iPhoto.  If you have lost those disks and don't have backups, you'll simply have to buy a copy of iLife.  Or call Apple with your machine's serial number in-hand and request replacement disks, which they will send you for a small fee.

  • When I go "system preferences" "sound" There is no option to activate the internal speakers. How do I restore it?

    When I go "system preferences" "sound" There is no option to activate the internal speakers. How do I restore it?

    Take each of the following steps that you haven't already tried.
    1. Start with the steps recommended in this support article.
    2. If your model has an audio-out (headphone) port, and a red light is coming from it, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    3. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones.
    4. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    5. Reset the NVRAM.
    6. Reset the SMC.
    7. Reinstall OS X after backing up all data.
    8. Make a "Genius" appointment at an Apple Store.

  • I have MAC OSX VERSION 10.4.11, I inadvertently deleted off my system. How can I restore?

    I have a MAC OSX VERSION 10.4.11, I inadvertently deleted Firefox 3.5 off my computer and emptied the trash. How can I restore a Firefox thats compatile with my MAC? THANKS!

    You can find the latest Firefox 3.6.x version here:
    *Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    * http://www.mozilla.com/firefox/3.6/system-requirements/

  • My iPhone asked if I would like to update my operating system.  I said yes.  After the update, it asked me for a passcode which I have never used before.  How do I restore my iPhone when I cannot go beyond the passcode page?

    After operating system upgrade, my iPhone demands a passcode be entered.  I have never used a passcode.  How can I restore my iPhone to how it was before?

    dukester14 wrote:
    After operating system upgrade, my iPhone demands a passcode be entered.  I have never used a passcode.  How can I restore my iPhone to how it was before?
    It's asking you to create a passcode. You can turn it off later if you wish.

  • I backed up my bookmarks to an external drive, rebuilt my system, and now when I try to restore from that file, I get "unsupported file type" How can I restore from this file?

    I backed up my bookmarks to an external drive, rebuilt my system, and now when I try to restore from that file, I get "unsupported file type" How can I restore from this file?

    Make sure that the backup file with the bookmarks has the correct file extension: .html for a HTML backup and .json for a JSON backup.<br />
    You can check that via the right-click context menu of that file and open the Properties.<br />
    If you are not sure about the file type then you can open the file in Firefox via "File > Open File"<br />
    A JSON backup will show as one long text line without line breaks and a HTML backup as a web page with clickable links.<br />
    A JSON backup starts with: {"title":"","id":1,"dateAdded":<br />
    An HTML backup starts with: <nowiki><!DOCTYPE NETSCAPE-Bookmark-file-1></nowiki>
    You may need to add quotes ("") around the name to rename the file to the correct file extension.
    See also:
    * http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  • How do I restore Firefox base after reinstalling Windows , but I have file system safe(all program folders)?

    How do I restore Firefox base after I reinstalled Windows , but I have my system and program old folders safe. ( exact Firefox Application and Program Files folders etc)?
    == This happened ==
    Every time Firefox opened
    == I reinstalled Windows

    What I mean is I have saved passwords and some website adresses in my Firefox that was on deleted windows ( but I saved the file system so it works from there using another computer) but all I need is passes and saved links . just the complete copy of my old setups and such . is that possible?

  • How do i restore emptied trash in system 10.4.11?

    How do i restore emptied trash in system 10.4.11?

    Only possible if you have stopped using your Mac so the file space doesn't get overwritten, and you use a date recovery company (expensive).

  • How do I restore missing sound output device in system preferencces?

    How do I restore a missing sound output device in the System Preferences. My MacBook Pro only shows a Digital output in the Sound pane and a red light at the Digital Output Port.

    If your model has an audio-out (headphone) port, and a red light is coming from it, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.

Maybe you are looking for

  • Error ERR-1002 Unable to find item ID for item "" in application "11501"

    Hi All, I am new to Apex, still a beginner. Please need your help on this. We recently upgraded to Apex 4.1 from Apex 3.0. The database version is 10.2.0.4. I am getting this below error. Error ERR-1002 Unable to find item ID for item "" in applicati

  • Help on JSP Basic

    Hi ALL , Can any one help me on Basic JSP. Question: I have a jsp page called page.jsp and 123.jsp.. in 123.jsp i have a Hyper link Called HLINK if user click that link ... contents in the page.jsp as to be displayed in the 123.jsp page just below th

  • Is it possible to authenticate the SAP GUI user against LDAP ( no SSO )

    Hi I was under the impression that you can user LDAP to authenticate your SAP GUI user . ( so users do not have to maintain and remember multiple passwords ).. However - note #603208  claims that this is not possible. This is quite an old note , is t

  • How calc bin size of tab???

    I have a data type xstring with binary code and I have to download a file to local in binary mode. I use:   DATA: BEGIN OF li_tab OCCURS 0,          line TYPE xstring,         END OF li_tab.           data: tab_bin type xstring.    "Binary data   DAT

  • Authenticating an R/3 web service in adobe form

    Hi, Please let me know how to authenticate an ABAP based web service in an adobe form being developed in WD Java( done in NWDS by creating a data connection using WSDL of the web service ) I need to pass the sap user id and password but I am unable t