How do I restore the websites in a New Tab? All that I have is a black screen with the Edit button.
I go to a website that I want to save with others in the New Tab and right click add to top sites. Nothing happens. The New Tab was very helpful in going to sites that I don't include in the bookmark toolbar.
In the New Tab screen I used to have about 15 images of websites that I could click on one to go to that site. I could easily add to, delete, or re-arrange the images.
hello, have you used an extension to get this behaviour in the past? firefox has introduced its own new tab page with 9 of the most visited pages (they are customizable though). maybe this is interfering with the addon. please refer to the following article in order to use the new feature in firefox: [[New Tab Page – show, hide and customize top sites]]
or in case you want to continue using your existing addon please consult its website or developer in order to configure it correctly to replace the inbuilt new tab page....
Similar Messages
-
After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.
IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
My iPad downloaded ios 8 and all I get is an unresponsive black screen with the logo. And when I reset it it goes to the page where it says hello in a bunch of languages then I try to configure it and my screen once again goes black. HELP!
Hello Lesliegrande,
Thanks for using Apple Support Communities.
Please follow the troubleshooting in the article below to help resolve this issue where you are unable to update your iOS device.
If you can't update or restore your iPhone, iPad, or iPod touch
Take care,
Alex H. -
I shut of my Ipad and now i have a black screen with the "busy wheel" spinning on a black screen for 4 hours! Can't shut it off, can't turn it on!!! Is there a reset button somewhere?
HI,
Reset iPad.
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appear
See Here:
If iPad won't turn on, or the display stops responding
From Here:
http://www.apple.com/support/ipad/basics/ -
This started after I downloaded the latest version of Explorer. It not only affects Explorer (which I never use), but Firefox as well.
I saw that article before I posted my question. At your suggestion, I reread it and then downloaded, and ran, the 'Malwarebytes' free program listed in the article. This 'free anti-malware' program does NOT actually do any system scanning. The closest it comes to actually 'scanning' for malware is, it checks your system to see if you have a good anti-malware system running. Period. So, it told me that I have McAfee and that it is up and running, all secure (which I already knew). The only real system scanning it does is to check for registry errors, junk files, etc. Then if you click 'repair' it repairs a small percentage of them and asks you for money, if you want to repair all of them. No thanks.
I suppose I could go out there into the big wide web and start looking for other free anti-malware programs, and start running one after another. But let me ask a follow-up question: If I UNINSTALL and then REINSTALL Firefox would that solve the problem? Or is it likely that the malware will still be lurking on my system?
Has anyone out there actually been hijacked by GOODTASKSEARCH? They are apparently one of many pseudonyms of something called LIGHTSSEARCH.
Thank you very much for your time. -
I have my ipod nano 5th generation and when i plugged to my computer it is recognized but i cant do anything. On the ipod all i can see is a blackscreen with the apple sign! How can i fix this?
Howdy Lumagofe,
I was thinking that you may need to reset the iPod Nano, outlined here How to reset iPod http://support.apple.com/kb/ht1320.
Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
If that doesn't quite get the iPod going again, then it will need to be restored. Use this article to help with that Restoring iPod to factory settings http://support.apple.com/kb/ht1339.
All the very best,
Sterling -
I cannot get iPhoto to open. It "opens" in Slideshow which shows that it is "working" but no pictures show, I cannot get out of slideshow. I cannot see my pictures although if I tell Picasa to import photos from iPhoto it does so I assume they are there...
1. Back up your Library now. You don't use iPhoto to back it up, you can do it simply by dragging the iPhoto Library from the Pictures Folder to the External Disk
2.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Help! I downloaded IOS6 onto my iPhone 4. The download went fine, but I have been stuck on the reboot sction of my phone for over 6 hours. I started the process at 10:30 PM EST, it is now 5:13 AM EST. What should I do? The nearest Apple Store is hours away.
Ron wrote:
I beg to differ. I didn't miss any point about the button being held in but you did miss the point that disengaging the earthing does make a difference at times . . .
What I wrote was. . . . . . "and maybe switch the power off the computer, or pull out the power plug, keeping it out for about ten seconds before the restart ? That, you will note, is a plus to the correct information!"
One more time, the Mac is ungrounded (no earth), the magsafe (in countries like the UK) has a 3 pin plug but there is still no earth connection beyond the ac adaptor, after that it is Dc positive / negative. Regardless of the foregoing off is off, no current flows! -
I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iphone without iTunes and then it turned it self off and now its stuck on the black screen with the loading sign. So please how can i turn my iPhone on again?
I figured it out by pressing the home button and the off button but when i turn my phone on again it's not restored. And when i try to restore it with iTunes it has to update but i can't update my phone because it's jailbreaked but if i can't update it, it won't restore the phone.
-
I have an ipod touch that continues to have a black screen with the white apple on it. It won't shut off and is completely frozen. This happened when we tried to restore it last night. Help please!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT201263 tried the restore but it wont restore- just get the black screen with the plug into i tunes
does anyone know how to get it to restore? I have tried but it wont restore and keeps going to the black screen with the cord plug into i tunes
You can also try placing the iPod in recovery mode using one of these programs and then restore
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella -
My phone is stuck on the black screen with the circular loading bar in the middle. how do i fix it?
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)
If that didn't help, do a restore by connecting with iTunes. -
I was downloading an app and it wasnt downloadnig so i turned my ipod off and now its a just a black screen with the the loading circle. Its been like that for 10 hours. How do i get back to my home screen? or how do i get the litle loading circle to go away.. it wont even load into itunes
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My Firefox is not working (All I get is a blank white screen with the firefox logo. If I have to reinstall Firefox 3.66, how can I transfer my old profile to the new installation?
== This happened ==
Every time Firefox openedDavid. Thank you very much. The problem was not with the canvas but rather the Viewer. But the solution was the same. Somehow, the Viewer window was re-set to Alpha. I changed it back to RGB.... and the picture is back. These issues are often very simple.... but they can drive you bats if you don't know the answer. Very grateful. Tim
-
Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore. Now I have a black screen with the Apple logo and the circle lines. None of the buttons respond. Help, please!!
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.
Maybe you are looking for
-
CSV conversion problems in File adapter
Hi, Hi, We had a problem with CSV conversions in file adapter.Our scenario is: IDOC>Xi>FTP(csv) Our target file should be show as when I open in notepad: "Active","1234","fdsfs","fsdfsdfs" "","","fsdfda"","Fsdfsfsdfsdf""12202003" Is this possible for
-
"No bean found under attribute key" exception when a JSP is not accessed
HI, We are using weblogic 7.1 SP6, Oblix and TRC struts in our application. During normal access to various pages system works fine. When the application is not accessed for 30 minutes system displays session expired exception. But some time when a p
-
DNS host name under virtual interface??
Hi, Can anyone tell me what is the purpose of DNS hostname under the virtual interface? Is it a required parameter for web-authentication / how does it affect the web authentication? Thanks in advance Jino
-
I was searching in the Finder for ".xmp" and I noticed it was not finding filenames with parentheses ie. TINT (BLUE).XMP How do I make searches more inclusive in the Finder?
-
The iPad "Grant" cannot be synced because there is not enough free space to hold all of the selected items (additional 5.67 GB required). What do I do?