How do I restrict access to the RT Series PXI Controller via its FTP server?

The RT Series PXI Controllers run an FTP server, so I can view files on the controller over the Internet wtih a Web browser. I can also download and upload files with a Web browser. How can I instruct the FTP server to give access only to specified, trustworthy FTP clients?

It is possible to "Lock" the controller from the Measurement and Automation Explorer program. The password you set when locking the controller (which prevents others from making configuration changes to the controller while running) is the same password that controls access to the FTP server. When the controller is unlocked, anyone who can access the PXI controller's IP can read, write, and delete files on the FTP server. When locked, anyone can read data from the FTP server, but only when logged in with the lock password will you have access to write or delete data.
For more information on locking your controller, see the user manual, MAX online help, or the following link.
NI Developer Zone: Controlling Access to LabVIEW Real-Time PXI Targets

Similar Messages

How do I restrict access at the field level in vendor creation XK01

Hello All,
Does anyone know a way to restrict access to a certain group of fields or a screen in vendor create? I know it is possible in vendor change XK02 using the field groups (transactions OBAT and OBAU) but we have a requirement to have one group of users create all vendor information except the bank details and another group of users just to create the bank details.
Thanks for any help you can offer.
rgds,
ian

We have had a similar discussion some while back. please refer to the thread below as it seems to be much similar to your requirement.
[click here|Hide or Encrypt Bank Account Number]

How do I restrict access to the survey to only selected respondents?

I have a survey that I wish to send to only selected respondents instead of opening up to everyone. How should I go about doing that?
Thank you.

There is no way to restrict it to just a set of respondents. There is one URL for the form and if a person has the URL they can fill out the form.
Randy

How do I restrict access to the saved passwords in Safari's settings?

I just noticed there is no barrier to entry to my entire catalogue of online passwords, anyone know if I can use restrictions or something to put a passcode on that area?

"As Meg said - the iPad is meant to be used by just 1 person, so the lack of ability to "lock down" the passwords isn't really a problem when the iPad is used as intended."
I don't think Apple has ever stated the iPad as a '1 person' device. In fact in many instances it is shared between multiple users.
Also if the device is stollen that password data could cause far greater loss than the cost of the device itself especially if there are banking logins saved there. You could say hey just don't save them but it's very easy to accidentally save a login and it's not exactly intuitive to remove the data. Just the other day I had to help my Dad delete his banking details from autofill.

How can I restrict access to add. internal hard drive by account?

Hello! Okay, so I am my computer's administrator, and I have a secondary 'guest' account that anyone else can use. So, I know that all my data on my main, OS hard drive is secure from the guest account accessing it, but what about the additional hard drive that I have installed?
I have a good deal of sensitive data and files stored (and aliased) on my second internal drive that I do not care for 'guest' users to stumble upon. How can I restrict access to the secondary storage hard drive from my Guest login account, and/or just plain hide it from it? Surely, there is a need for this that has brought about a solution. Any tips/advice/solutions?
Thanks!!!
=)

Click here and follow the instructions followed by placing the folders and files on the image; if the password is in the keychain, it will be supplied whenever you're logged in.
(41018)

SSH login- how do I restrict access to a shared folder?

I have created Shares in WGM for SMB and AFP access on my OS X 10.4.8 Server. However when I connect via SSH it's not restricting access to the folder based on the User Name I login with- I see the entire volume! How do I restrict access to a specific folder based on a user name setup in WGM? ACL's?

Hey George,
It sounds like you are trying to limit ssh/sftp users to a specific area, aka jails. The FTP server lets you 'chroot' users to a certain area making it appear as the root thus preventing them from navigating up the hierarchy, which is what I think you, and me and many others are trying to accomplish.
The ssh compiled into OS X is missing this very needed feature. There have been a few documented workarounds, but they've either been too insecure or too clunky for me.
I've dealt with the fact that my users can get to the root of the hard drive, and have just been very careful about my privileges (by using ACLs), thus preventing them from getting inside areas they shouldn't.
There's a good write up here: http://www.schwie.com/brad/macosxsftpchroot/ and if you include the term 'chroot' in your searches, you should find a bit about it here too.
And Roger, I think George meant the file sharing protocol used by ssh. man sftp.

How do i restrict access to gambling sites

how do i restrict access to gambling sites on ipad mini

You can put a filter on your wifi or use something like the K9 browser.

Restricting access to the Admin WebConsole of WebAccess 2012

Hi,
With the new WebAccess 2012 web application, the console is now a WebConsole that can be accessed by the URL http://<server>/gw/webacc?action=Admin.Open
I search the KB, the documentation and now this forum, looking for a way to restrict access to my precious WebAccess Console. No luck! (Only one thread ask for a similar solution restrict admin tool based on ip with no solution provided so far)
Humm So we are only 2 guys in the Groupwise community concern with security in those days? No engineer at Novell ask himself if exposing an Admin console to the Whole Internet is a good idea?
Furthermore, login (successes and failures) to the Webconsole are not written to log files. So I cannot even monitor if my WebConsole is under a brute force attack!
Here some technical information to consider:
1) I have Groupwise 2012 SP2 running under Windows 2008 R2
2) Since the Admin Webconsole is hosted under the same web site as WebAccess, I cannot restrict access to the URL http://<server>/gw/webacc?action=Admin.Open without blocking at the same time access to WebAccess using firewall or IIS rule.
3) I do not want to use IPS to restrict access to this URL
Truly

Francois, Just FYI the "green dots" are only accumulated by forum users taking the time to rate Laura's answers. She has no control over them and they speak for themselves. I've asked Knowledge partners to put the bit about rating in their signatures, it wasn't Laura's idea. Just FYI Laura also has the highest feedback scores out of all her peers in the program which also says something about her interactions here in the forums. As was pointed out, Laura is not a Novell employee, just another Novell user trying her best to stay on top of the issues and taking time out of her busy day to try to help other forum users. Nobody is going to be right 100% of the time. Please refrain from petty personal attacks in the future.
I suggest you take the time to read the forum Terms of Service: https://forums.novell.com/faq.php?faq=novfor#faq_rules where it states clearly:
Offensive Messages: Messages personally attacking, calling names, or otherwise harassing or being condescending to another forum member or any ethnic or religious group will be deleted. Offensive and/or vulgar language is not appropriate for Novell sponsored forums.
Your message was offensive, personally attacking, condescending and was deleted as per the forum terms and conditions. I wouldn't be surprised if the volunteers around here were a bit slower to respond to any issue you may post here in the future.

How to give "print"access to the requisitioner

Hi,
I need to know the procedure,how to give "PRINT" access to the requisitioner. We have this access to the buyer(monitor shopping cart/check status/process PO etc....)
Also how can a requisitioner at least print PO fromECC?
pls help.
Bis

Hi Venkatesh ,
This note does not mention SRM 7.0 . I just wanted to confirm from you that the changes the note mentions does in fact work in SRM 7.0?
We are upgrading to SRM 7.0 and are thinking of switching from classic to extended classic, but ONLY if we can have the PO output in the ERP system.
Thanks!
-Paul

What is the best way to restrict access to the page

Hello Everyone,
We are trying to restrict access to the web page that is being accessed by the applet. Currently it is public so anybody can view it just by entering URL in the address window. We tried to restrict its access to only certain IP Addresses but then we need to enter every client's address out there since applets execute on the client and not on the server.
Is there any good way of restricting access to the web page from an applet?
Any help will be greatly appreciated.
Thanks,
Y.M.

Most web servers allow protection of web resources.
In particular, apache allows .htaccess (or other, if changed in the root configuration) files to change the access to various resources, and IIS allows you to set up protection domains to restrict access to folders.

A custom filter or module, such as URLScan, restricts access to the file.

My btns do not work, I think becuase I added this:
import flash.display.Sprite;
    import flash.net.navigateToURL;
    import flash.net.URLRequest;
    import flash.net.URLVariables;
to my time line code in an attempt to get four btns to funtion out correctly with a navigateToURL "_self".
Now the IIS browser reads "custom filter or module, such as URLScan, restricts access to the file".
Where can I find these filters and destroy them...please?
Sabby76

You might want to find out what purpose the filter(s) serve(s) before destroying (disabling/removing) it/them. For example, URLScan is there to prevent potentially harmful requests from being processed by IIS, and is configurable.

I have Acrobat XI on a PC and have received a Fatal Error message indicating that "Acrobat failed to connect to a DDE Server." Acrobat will not open now. How do I regain access to the program?

I have Acrobat XI on PC. After trying to convert a webpage to PDF, I received a Fatal Error message indicating that "Acrobat failed to connect to a DDE Server." Now, the program will not open. How do I regain access to the program?

I have Acrobat XI Pro and have been experiencing all sorts of "freeze ups" with it ever since Adobe released the new Acrobat DC the other week. I see that an automatic update was pushed down to my Acrobat XI Pro at the same time. Is this the first issue you have encountered with your Acrobat XI, or have you been having other issues suddenly as well?? Just wondering ...

ESW: how to enable developer access to the ES workplace systems

Hi,
I received the access from ES workplace for ECC . But I dont have any authorization create any object , the role S_DEVELOP is not assigned to me ,
How to get developer access for the ES Workplace systems ( unable to creat new object ) ?
is it like that P users dont have developer access in all systems ?
How to get assign my user ID with the required roles ?
Experts Pls guide me on the same .
Regards
Chinnaiya P
Edited by: chinnaiya pandiyan on Nov 27, 2010 6:01 PM

hi,
it requires a userid and password to get authorization for developping object.
i already had these information but i don't know where should i use it to get authorization.
can anyone who already have passed through this problem can guide?

How to find what are all the rules and events are monitoring for specific server in SCOM 2007

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.
Thanks for the question Sandoss. This is something that we all come across at sometime.
Thanks & regards, Sumit Agrawal
The lack of this feature is an inexcusable oversight for an enterprise management product. They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down.
BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server.
The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well. I'd like some feedback if something is missing.
DECLARE @srv varchar(30)
SET @srv = 'your name here'
SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
case
    when s.HealthState = 1 then 'healthy'
    when s.HealthState = 2 then 'Warning'
    when s.HealthState = 3 then 'Critical'
    else 'N/A'
end as Health
FROM state AS s WITH (NOLOCK)
left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
where
bme.FullName like '%' + @srv + '%'
and s.HealthState <> 0
and mon.IsInternalRollupMonitor = 0
and mon.IsExternalRollupMonitor = 0
order by bme.DisplayName, mon.displayName

How do I restrict access by domain and the rest of the world to the documents in the public_html folder in iPlanet Portal Server?

Hello,
We have multiple domains configured in our iPlanet Portal Server 3 demo environment. In addition we are using the gateway.
In one of these domains the userTemplate.html file is tailored to display Macromedia Flash components at dynamic positions on the page. The logical home for these Flash components (since the portal software cannot find them if we simply store them in iwtDesktop) is somewhere below the /opt/SUNWips/public_html directory.
The problem is that once the file is stored here I can access it if I know the url (http://server:8080/file_path) without being authenticated in the domain.
The allow/deny url policy settings are specific to a domain and seem to have no affect on the rest of the world.
Any advice you can provide is greatly appreciated.
Thanks!

Joel,
If your intent is to block access to the doc root, you can probably use access control lists (acl) to prevent anyone from accessing the files stored under public_html. You can get more information about how to create ACLs from the following URL
http://docs.iplanet.com/docs/manuals/enterprise/41/ag/esaccess.htm#1005439
You can even set up Basic Authentication for access to the direcory or ip based access or any which way you want. I've personally never blocked access to the doc root in portal, so I am not sure what the impact will be.
Hope this helps!

How do I restrict access to the RT Series PXI Controller via its FTP server?

Similar Messages

Maybe you are looking for