How do I restrict access to touch screen functions on M401dn printer

I have just received a Laserjet pro (M401dn) printer for use in a classroom. It is now set up for network printing but is there any way I can stop students changing settings like IP address from the touch screen console. Our previous printers (P2055dn) had all the settings accessible but through an unattractive 2 line LED console. The new printer with its colour touch screen is just too tempting for inquisitive fingers.

Put some duct tape over it.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

How do I restrict access to home screen during interactive slideshow?

I want to set up a slideshow, of sorts, in which people can access a variety of pictures (some of which will have captions and info relating to content), easily navigate between them, and have the pictures in an organised format/a format that is easily navigated. The question I have, is how to make it so that people can't come out of the program/slideshow and into the home screen or anything else on the ipad. It will be part of an interactive display.
Any help/info would be appreciated.
Thanks

Put some duct tape over it.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

SSH login- how do I restrict access to a shared folder?

I have created Shares in WGM for SMB and AFP access on my OS X 10.4.8 Server. However when I connect via SSH it's not restricting access to the folder based on the User Name I login with- I see the entire volume! How do I restrict access to a specific folder based on a user name setup in WGM? ACL's?

Hey George,
It sounds like you are trying to limit ssh/sftp users to a specific area, aka jails. The FTP server lets you 'chroot' users to a certain area making it appear as the root thus preventing them from navigating up the hierarchy, which is what I think you, and me and many others are trying to accomplish.
The ssh compiled into OS X is missing this very needed feature. There have been a few documented workarounds, but they've either been too insecure or too clunky for me.
I've dealt with the fact that my users can get to the root of the hard drive, and have just been very careful about my privileges (by using ACLs), thus preventing them from getting inside areas they shouldn't.
There's a good write up here: http://www.schwie.com/brad/macosxsftpchroot/ and if you include the term 'chroot' in your searches, you should find a bit about it here too.
And Roger, I think George meant the file sharing protocol used by ssh. man sftp.

How can I restrict access to add. internal hard drive by account?

Hello! Okay, so I am my computer's administrator, and I have a secondary 'guest' account that anyone else can use. So, I know that all my data on my main, OS hard drive is secure from the guest account accessing it, but what about the additional hard drive that I have installed?
I have a good deal of sensitive data and files stored (and aliased) on my second internal drive that I do not care for 'guest' users to stumble upon. How can I restrict access to the secondary storage hard drive from my Guest login account, and/or just plain hide it from it? Surely, there is a need for this that has brought about a solution. Any tips/advice/solutions?
Thanks!!!
=)

Click here and follow the instructions followed by placing the folders and files on the image; if the password is in the keychain, it will be supplied whenever you're logged in.
(41018)

How do i restrict access to gambling sites

how do i restrict access to gambling sites on ipad mini

You can put a filter on your wifi or use something like the K9 browser.

I was restoring my Iphone 4S and the touch screen function is disabled and I cannot use my Iphone anymore

I was using my wife's account on my Iphone. I wanted to separate and tried to restore my Iphone with my new account and wanted to restore. The touch screen function stopped working. It does not let me start the set up.

what are you trying to do?

HT204168 touch screen function not working when using facetime

Why is my iPad touch screen function not working when using FaceTime?

Hi megascones,
I apologize, I'm a bit unclear on the exact nature or scope of the issue you are describing. If you are having issues with the touch screen on your iPad, you may find the troubleshooting steps outlined in the following article helpful:
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Regards,
- Brenden

Why is my touch screen function not working when using facetime

Why is my touch screen function not working when using facetime

Hello megascones,
After reviewing your post, it sounds like the screen is not responding to touch in one app. I would recommend that you read this article, it may be able to help the issue.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Restart your device. If you can't restart, reset your device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

My iphones touch screen function is not working. I cannot do anything because it is passcode locked and i cant swipe to enter the code...pls help

my iphone 5 touch screen function is not working. I cannot do anything right now even reset it because i cannot disable the Find my Iphone feature which is needed in resetting your iphone thru itunes. Please help. My phone is already out of warranty and i cannot just rely on techinicians here in our place since it is possible they might switch the original parts to something else...please help me thanks

Log in to https://icloud.com/find using your Apple ID. Erase and then disconnect your phone from your account. You can then restore it using iTunes.

PUT BACK THE MISSING THE SCREEN FUNCTION IN THE PRINT DIALOG BOX!!!!

Hello all...
I am a creative director in the screen print (garment industry) for over 20 years. We have always used PS to directly print and control our halftone screens and angles through the screen function in the print dialog box. Now it has miraculously disappeared after so many versions previous.
I emplore Adobe and their team to please update this function back into CS5.
Although it is a function many might not even understand how to use, it is IMPERATIVE to the screen printer/artist in this industry.
There are workarounds, of course, but they are much more tedious and time consuming.
I truly cannot convince enough that we folks in this industry want this function back!!!!!

You might want to also post in these Fora:
Photoshop Feature Requests
http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop

HT1178 How do I restrict access to my network to mac addresses?

I am setting-up a new Time Capsule and wish to restrict access to my wireless network to only those mac addresses of my equipment. I can't find instructions on how to do this. Any help in pointing me to the correct resource would be appreciated.

Suggest that you check the Help area in AirPort Utility for instructions.
Open AirPort Utility
Click the Help menu at the top of the screen
Click AirPort Utility Help
Wait for Help to load
Click Setting up a Wi-FI network on the left side of the main page
Click Control when a user can access your network
Click Control access to your wireless network

ASA WebVPN. How do you restrict access to users in an AD group using LDAP?

Hi All,
I am trying to configure separate WebVPN connection profiles to give different portal bookmark contents to users based on their AD group membership. This has been very difficult, even though I beleive it should be easy.
The login page of teh ASA by default has a dropdown to allow default users to access the default portal and the SSL VPN client connection.
There are two other portals that I would like to restrict access to based on AD group membership. I have set these up to be selected by URL.
The biggest problem is, I have no way of knowing how to go about this. The AAA LDAP options show a group membership search, which I have configured, but I cannot say "Profile X is restricted to AD group CarpetBaggers", so that if soneone that is NOT a carpetbagger tries to log in, it fails.
I can only do an all or nothing scenario.
It would be nice to use Dynamic Access Policies to do this, and I have created a few, but they do NOT seem to work when the drop down aliases or URLs are in use. So how do I go about using them in this scenario? Turning off the aliases or URLs is not really an option right now.
Scenario 1 would work the best for me. Restrict access to profiles/groups based on AD group membership using LDAP.
Scenario 2 would be an ideal longer term solution.
Any thoughts, ideas or assitance would be greatly appreciated.
Cheers

This is exactly what i was looking for, and Nelson is correct. When you enter the DAP configuration for a profile click on "Advanced" and there is the option to create a logical expression. The guide (ther is a button to access this) is really helpful, with a couple of examples. This is what i used:
assert(function()
   if ( (type(aaa.ldap.distinguishedName) == "string") and
        (string.find(aaa.ldap.distinguishedName, "OU=Users") ~= nil) )
then
       return true
   end
   return false
end)()
from the debug dap you can see what Users relates to;
DAP_TRACE: Username: MyUsername, aaa.ldap.distinguishedName = CN=Mr B,OU=Users,OU=Site ******,DC=CH,DC=Mycompany,DC=com
My admin account fails to get me in to the same profile:
DAP_TRACE: dap_add_to_lua_tree:aaa["ldap"]["distinguishedName"]="CN=Admin Mr B,OU=Admin Users,OU=Site *****,DC=CH,DC=Mycompany,DC=com"
Thanks
Andrew

How do I restrict access at the field level in vendor creation XK01

Hello All,
Does anyone know a way to restrict access to a certain group of fields or a screen in vendor create? I know it is possible in vendor change XK02 using the field groups (transactions OBAT and OBAU) but we have a requirement to have one group of users create all vendor information except the bank details and another group of users just to create the bank details.
Thanks for any help you can offer.
rgds,
ian

We have had a similar discussion some while back. please refer to the thread below as it seems to be much similar to your requirement.
[click here|Hide or Encrypt Bank Account Number]

How do I restrict access to a folder-like attaching a password in order for someone to open it.

I want to locate a folder on my desktop, but want to restrict access so that anyone on my laptop can't access the folder, even though they will see it sitting on the desktop. How do I set up folder permissions?

Any file on YOUR desktop already has permissions set such that no other user account can access. But if you want to use the OS's native capability to encrypt the contents of a folder, place that folder within an encrypted image.
Use Disk Utility to create a disk image, and encrypt it with the same utility (use settings in "new image") . Make sure you size the image to a size great enough to hold all your files. Once created, and placed on your desktop, open it, using your password. Once the image is mounted, place the files you want to protect into that image, and then dismount/eject the image. The image essentially becomes your password encrypted folder. Double click it at any time to access your files (enter password). Eject the mounted image to "re-encrypt".
If you want a disk image that has cross platform capability, then try TrueCrypt. It is great App for Mac & Windows, with other advantages as well.

How do I restrict access to JSP or servlet only through SSL Port

Hi
I want to restrict the access to few jsp and servlet only through SSL port,
so how can I block the acces to those jsp and servlet through normal port??? We
are using weblogic 5.1.
Any help on this highly appreciated.
Aruna

Hi,
To restrict access(56 bits or less). follow the below steps.
1. Go to your Webserver instance ServerManager
2. Click Preferences Tab ------> Encryption Preference
------> There disable "DES with 56 bit
encryption and MD5 message authentication."
for SSL 2.0 ciphers or SSL3.0 Ciphers. Which ever
needed.
3. Save and Restart the Webserver instance.
The above steps are for 4.x version.
Thanks,
Daks.

How do I restrict access to touch screen functions on M401dn printer

Similar Messages

Maybe you are looking for