How do i retrieve data from the cloud

How can get a back up of my contacts from the cloud

When you have forgotten a restrictions password, you can no long restore from a backup that had the restrictions turned on. You can only start over with a full reset.
But you can sign back into icloud (Setting>icloud) and turn on the services you have used before (calendars, reminders, etc...). That will sync down the data to your ipad.

Similar Messages

How do I retrieve data from the cloud to put back on my iPad after it was restarted, I.e. my calendar, notes, reminders?

I took my 1st gen iPad to an Apple store because of some glitches in the operating system, and I had forgotten my restrictions pass code. They backed up my data on the cloud, then took everything off of my iPad to basically "start over" with a new iPad. Now I don't know how to retrieve my calendar, notes, reminders. Somehow my contacts are there. I went to general settings and made sure the cloud was turned on, but I don't know how to pull from the cloud what we had previously backed up. Thanks for ANY suggestions:)

When you have forgotten a restrictions password, you can no long restore from a backup that had the restrictions turned on. You can only start over with a full reset.
But you can sign back into icloud (Setting>icloud) and turn on the services you have used before (calendars, reminders, etc...). That will sync down the data to your ipad.

Synching my Ipad and PC, my contact info disappeared from Outlook. How do I retrieve them from the cloud.

I recently synced my Ipad and PC. All my contacts disappeared. How do I restore them from the cloud?

In Outlook, open the iCloud Contacts folder

How do I retrieve messages from the cloud?

When I click on the cloud button, I can see that I have 42 messages, but cannot figure out how to retrieve them. Any help would be greatly appreaciated.

Hi Vzw-tempname,
We know that retrieving your messages is important! What happens when you click on the Cloud icon? Does it aske to setup the cloud? Do you receive any error messages?
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability

How do i retrieve data from my external hard drive?

how do i retrieve data from my external hard drive?

If your hard drive can be detected and shows up as a drive letter in my computer but you can't access your files,then you can recover your data off it with data recovery software easily.This way is the easiest and the most inexpensive way to recover your data.If you bring it to a computer repair shop that is available for data recovery servise,they will cost you $500-1000 or more.Hmm, a lot of money.
I managed to recover data from crashed hard drive with Tenorshare Data Recovery.If needed,you can download it and scan your hard drive for free to preview whether your data can be recovered.It will show you thumbnails for recoverable pictures.

How do i retrieve data from a powerbook whose screen lights up but displays nothing? I have a firewire and a second powerbook...

how can I retrieve data from my old powerbook? It's screen lights up, but displays only pixelated blankness. I have a second powerbook and a firewire cable....

It would probably be correct to assume that both PowerBook computers are equipped with FireWire. The article below could possibly be of interest to you. With a bit of luck, the old computer will be recognised.
http://support.apple.com/kb/HT1661
Otherwise, it may become necessary to open the old PowerBook and remove the hard drive. The drive can then be connected to an appropriate external USB adapter, and read via another Mac.
Jan

Failed to retrieve data from the database/invalid argument provided when employing link between two web services datasources

Post Author: vpost
CA Forum: Data Connectivity and SQL
I am trying to join information from two related web services within CR XI. I have successfully set up the web services as data sources have been able to get to the point where I get good data back. However, when I try to pull in certain fields, I get an error that says "Failed to retrieve data from the database/invalid argument provided". Here's the scenario:
The web services are structured as follows:Web Service 1 (Artist) has attributes of Artist Name and Date of Birth.Web Service 2 (CD) has attributes of CD Title and Release Date. Underneath each CD are songs, each of which have a Song Title and Artist Name.
I have defined both web services and defined a link between Artist.Artist Name and CD/Song.Artist Name. I am able to run a report with Song Title and Date of Birth that crosses web services. I am able to run another report with Song Title and CD Title that crosses the different levels in the second web service. However, if I add CD Title to the first report or Date of Birth to the second (both of which effectively force CR to employ the link between the two web services AND the CD/Song hierarchical structure in the second web service, I get the aforementioned error.
Any assistance understanding how multiple web services can be linked in this manner would be greatly appreciated.
Thanks in advance.

Post Author: Mike Wright
CA Forum: Data Connectivity and SQL
Not sure about your exact situation, but having similar problem with another application and have tracked down to security. Added user to group Domain Admin and it works fine. It appears to be accessing a subdirectory which it does not have permission to use and then times out and returns the "invalid....". Seems that once the query just over a certain size (and I'm not sure what triggers this) it needs to make use of temparory file disk, intead of ram.
I'm still trying to track down which temporary it's trying to uses - so if you have any ques.
cheers

Crstal Reports: "Failed to retrieve data from the database"

Running a report in crystal report from SAP 8.81 using the following parameters: CardCode, GroupCode, Date gives the following error: "Failed to retrieve data from the database" "Conversion failed when to converting the nvarchar value to data type int 12/31/2005 [Database vendor code: 245] ".
The store procedure in SQL Server executes smoothly and If you run the report with the date = 12/31/2005 in the parameter also returns expected results.
Thanks.

Hello,
Is this in Business One? If so CR is an OEM build and that forum/product supports that version.
Please post your question to: http://forums.sdn.sap.com/index.jspa#44
It could simply be you need to use a formula to convert the field. Click on the Formula Editor and the hit the F1 key and search on "date". Lots of info on how to convert todate and from date tostring...
Thank you
Don

Failed to retrieve data from the database using Crystal Reports XI R2

I am using Crystal reports XI R2 and using the Universal Web Connector (connecting to Coghead). When I put some some of the fields from the database and run Preview I get "Failed to retrieve data from the database." . Where is this message coming from and how can I track down what the issue is?

Hi Jamie,
When you are trying to Browse Data of a field it is not poping up any window menas, it is unable to interact with database and get the data from database.
Try to create a new report using ODBC with Xtreem Sample Database. If you get the data in your report without any error then your connector is not working / unable to pull the data into your report.
You can find the supported platforms document in below link
http://support.businessobjects.com/documentation/supported_platforms/xi_release2/default.asp
Thanks,
Sastry

Failed to retrieve data from the database. [Database Vendor Code: 116]

My report is using Java Bean class as datasource and the Java Bean class calls a report-specific Java program to return a result set.
Report fails to generate and the error message is
Failed to retrieve data from the database. Details: [Database Vendor Code: 116 ]
Can anyone tell me what error code 116 means?
Thanks.

The problem is solved internally. Our team implemented a result set data structure that incorrectly converts a Double into a String before passing it to Crystal Report for rendering. Data Vendor Code I met yesterday was the outcome of illegal class conversion.
I have a side question; our development team would like to use log4j to log method calls invoked during rendering. Our problem could be solved earlier if we knew getString() was invoked instead of getDouble() during rendering. We thought of specifying the full path of log4j jar file in CRConfig.xml but we don't know how to configure CR to write logging information into a specific file location.
Please help.
Thanks

Failure to retrieve data from the database (Vendor Code 6550)

I am having a trouble with two of the 6 reports that I have created. I am using Crystal XI and Oracle 10g. The underlying database object is a stored procedure that accepts as input a start time as a TIMESTAMP, an end time as a TIMESTAMP and a furnace number as a number. I have a cursor ref as a return parameter.
When I run the stored procedure in Oracle I get the selected records and can view them on the screen.
When I refresh data on the report in Crystal XI developer, the designer asks me for the start and end time and furnace number. When I input these values the report displays properly.
When I launch the report from my VB .NET 2005 application I am asked for the username and the password for the database (this is another problem I need to solve as this information I put into the program seems to be ignored in my program) then I receive the following failure message:
Failure to retrieve data from the database (Vendor Code 6550)
When I launch the other reports, they only ask me for the username and password then they display the proper data.
The main difference between my other reports and the two that are returning the above failure code is that the other reports are to either tables or views. The two that don't work are tied to stored procedures. I there any way that I can solve this problem or at least get more information?
Any help would be greatly appreciated. Let me know if you need any other information.

I have a similar problem, the only difference is that the crystal report error is only thrown when I try to load the sub reports at my web application. When I deploy my report to the Web application the main report loads up fine but when I try to launch the sub reports from the main report it can no longer load.
But when I use the Crystal report developer I am able to load the main report and it's associated sub reports without any issues.
My issue only occurs when I try to load the sub report in the web application. The following sections shows how my reports look like both in my .NET web application and also at the Crystal Report Development IDE.
Failure: Loading my Reports from .NET Web Application
1) When I load from the web application I am able to load the main report as per the print screen below.
2) When I try to click on the hyper links to enter the sub reports I am now able to load them, both sub reports cannot load and will throw the same error "
Failed to retrieve data from the database. Details: [Database Vendor Code:
6550 ] Failed to retrieve data from the database. Details: [Database Vendor
Code: 6550 ] Failed to retrieve data from the database. Error in File OAWR3011A
{CEC8A94A-4490-4640-95FB-2739A679978B}.rpt: Failed to retrieve data from the
database. Details: [Database Vendor Code: 6550 ] "
Success: Loading my Reports from Crystal Report Development Tool
1) This is my Main Report Loaded from the Crystal Report Development Tool, the first two hyperlinked fields are links to my sub reports, step number 2 and number 3 shows my sub reports when I load it using Crystal Report Developer
2) Sub Report 1 Loaded Successfully, when I click on the fields in the first link
3) Sub Report 2 loaded successfully when I click the second field hyper link

EVDRE encountered an error retrieving data from the Web Server

Hi,
I'm working on a presales AppSet "Demo5b".
When I create a brand-new EVDRE report on FINANCE app, there is no problem.
However, after changing to ICMATCHING app, when I type =EVDRE() on a blank sheet and press Refresh, the following message pops up.
EVDRE encountered an error retrieving data from the Web Server
Retrying in (??) seconds
Any idea why this happens and how it can be solved?
Thanks!
Sunny

Hi Joost,
I have the same problem. When I try to retrieve data on an input schedule is launched that error.
I am working on an VM on MS BPC.
I am not working with cubes so the solution is not the same.
If i process all my dimensions this error does not appear any more?
Best regards,
Vitor

How to display retrieved data from DB on web page

Dear all,
how to display retrieved data from oracle database on web page,Does anyone can give me an simple example?
thanks
WJ

Hi,
I use JRun tags but you can use Oracle tags or just JDBC... First u need to install jdbs connection and set e connection by using JMC (For JRun) named nomad.
U can also try the link below for JRun tags..
http://wds.its.uiowa.edu/cache/docs/jrun/html/JRun_Custom_Tag_Library/contents.htm
<%@ page import="java.sql.*,javax.sql.*,java.text.*,allaire.taglib.*" %>
<%@ taglib uri="jruntags" prefix="jrun" %>
<%@ page contentType="text/html; charset=ISO-8859-9" %>
<html>
<head>
<title> Test Page </title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-9">
</head>
<body>
<BODY BGCOLOR="#FFFFFF" LEFTMARGIN=15 TOPMARGIN=20 >
<jrun:sql datasrc="nomad" id="q1">
select empno,
     ename
from emp
order by ename
</jrun:sql>
<center>
<table border = 0 cellpadding = 3 cellspacing = 1>
     <th>EmployeeNo</th><th>Name</th>
<jrun:param id="q1" type="QueryTable"/>
<jrun:foreach group="<%= q1 %>">
               <tr>
               <td> <%= q1.get(1) %> </td>
               <td> <%= q1.get(2) %> </td>
               </tr>
</jrun:foreach>
</table>
</center>
</body>
</html>
----------------------

I just just got the new IPhone 5. How do I get everything from "The Cloud" onto my new IPhone? I have a LOT of complete music albums I purchased from ITunes

I just just got the new IPhone 5. How do I get everything from "The Cloud" onto my new IPhone? I have a LOT of complete music albums I purchased from ITunes
And would very much like to retrieve it. Help please & thank you everyone

Transferring from old to new
http://support.apple.com/kb/HT2109

How do i retrieve data from the cloud

Similar Messages

Maybe you are looking for