How do I retrieve data stored on iCloud to my ipad

I had iCloud switched on and when I went into my numbers app on the ipad air all the spreadsheets I had created have disappeared how do I retrieve these and keep them on my ipad?

have a look at this support article.

Similar Messages

  • HT5527 How do I retrieve documents stored in iCloud and bring them back to my computer?

    How do I retrieve documents stored in iCloud and bring them back to my computer?

    You can select them in the iCloud Web interface and download them to your Mac. You can do that by right-clicking, or by clicking on the Gear menu in the upper right of the window.

  • How to restore data stored on icloud

    Hi - I have around 13gb of data stored on iCloud (i can see this when I click on manage storage).I wish to use iCloud to retrieve this data when setting up my IPad. However, when I set up the ipad and use a backed version in the icloud, I am not able to retrieve all 13gb of data. So, my question is how to use the iCloud to retrieve all this data on my IPad.
    Many thanks,
    James.

    hi grant. thank you.
    i think i am one giant step away from completing all of this. of course at the moment i am recalling your "you are trying to do too much at one time" caution. the lowdown here is that my IT guy just left for a cross country trip and is not available and i am in the weeds big time. can you help me with something?
    i am in Lion and I seem to be seeing TWO user accounts named after my SHORT NAME (say this is "Mac's Mac Short Name") for my Snow Leopard install. One has the ICON for my Snow Leopard Install and the other has a default ICON.
    in the USERS folder i am seeing one folder with the HOME FOLDER ICON that has the same name as my Snow Leopard Home Folder and I see one folder that has the same name as the SHORT NAME listed above. So this folder says "Mac's mac Short Name" and it has folders in it with red circles and negative symbols showing it is not accessible (these are Desktop, Documents, Downloads, Movies, Music, and Pictures).
    Since I migrated my DESKTOP (long story but i have a lot of data on here and i wanted it in Lion so I could organize it before moving some of the work that was finished to the raid volume where my DOCUMENTS folder is located) - I can tell that I /think/ that the SHORT NAME with the Snow Leopard icon is the correct user but when i try and delete the User Acount with the same short name but a default icon is says that there is 194.1 GB of data in here!
    So i am confused to the point where it seems OK to copy my home folder in Snow Leopard to the Data Drive but it seems unwise at the moment to point my new Lion install there because I am so confused as to what i have for user accounts.
    Did any of that make sense enough to solve? I hate to think i am out for two weeks over here.
    - jon

  • How do I retrieve data from iCloud back on to my iPad

    How can I retrieve data off iCloud back onto my iPad after a full reset. Had to reset to get my FaceTime to work after the new upgrade.

    Welcome to the Apple Community Thomas.
    Have you checked that contacts syncing is switched on in settings > iCloud and that in the contacts app, the iCloud account is checked under the groups setting.

  • How to get values/data stored in the database into a list-item.

    how to get values/data stored in the database into a list-item.
    i tried to make a list item without any values assigned to it...but i got the below error.
    FRM-30191: No list items defined for required poplist.
    or
    FRM-32082: Invalid value for given item type.
    List EMPNO
    Item: EMPNO
    Block: EMP
    Form: MODULE5
    FRM-30085: Unable to adjust form for output.
    then according to some docs, i tried the the following for the trigger
    when-new-form-instance
    declare
         rg_name varchar2(40) := 'emp_rec';
         status number;
         groupid recordgroup;
         it_id item;
    begin
         it_id := Find_Item('empno');
         groupid := create_group_from_query(rg_name, 'select empno from emp');
         status := populate_group(groupid);
         populate_list(it_id, groupid);
    end;
    but yet didnt work... :(
    so how the heck do i get values fetched from the database table into the list item?

    for list items you need to values in the record group, one is the shown value and one is the returned value.
    Check out the online help for the populate_list built-in.
    You'll need something like select ename,ename from emp as the record group query.

  • How do i retrieve data from my external hard drive?

    how do i retrieve data from my external hard drive?

    If your hard drive can be detected and shows up as a drive letter in my computer but you can't access your files,then you can recover your data off it with data recovery software easily.This way is the easiest and the most inexpensive way to recover your data.If you bring it to a computer repair shop that is available for data recovery servise,they will cost you $500-1000 or more.Hmm, a lot of money.
    I managed to recover data from crashed hard drive with Tenorshare Data Recovery.If needed,you can download it and scan your hard drive for free to preview whether your data can be recovered.It will show you thumbnails for recoverable pictures.

  • How do I retrieve data from external hard drive

    How do I retrieve data from external hard drive

    What problem are you encountering?
    Normally you would connect it to your Mac and just drag and drop.

  • How do i retrieve data from a powerbook whose screen lights up but displays nothing? I have a firewire and a second powerbook...

    how can I retrieve data from my old powerbook? It's screen lights up, but displays only pixelated blankness. I have a second powerbook and a firewire cable....

    It would probably be correct to assume that both PowerBook computers are equipped with FireWire. The article below could possibly be of interest to you. With a bit of luck, the old computer will be recognised.
    http://support.apple.com/kb/HT1661
    Otherwise, it may become necessary to open the old PowerBook and remove the hard drive. The drive can then be connected to an appropriate external USB adapter, and read via another Mac.
    Jan

  • How do I retrieve data from time machine from an old mac (which was running 10.5) on my new iMac running mavericks?

    How do I retrieve data from time machine from an old mac (which was running 10.5) on my new iMac running mavericks?

    See B 5/6.
    Time Machine Troubleshooting

  • How to see the datas stored in DBMS_SQL.Varchar2S variable?

    how to see the datas stored in DBMS_SQL.Varchar2S variable?
    it says error if i use dbms_out.put_line.

    in PLSQL :
    procedure p_try (p_test IN OUT DBMS_SQL.VARCHAR2S) is
    begin
        p_test.delete ;
        p_test(    -3000) := '===============' ;
        p_test(       22) := 'Hello'  ;
        p_test(    55555) := 'World' ;
        p_test(987654321) := '===============' ;
    end p_try;
    set serveroutput on
    declare
         l_test dbms_sql.varchar2s ;
         i number ;
    begin
         p_try (l_test) ;
         i :=  l_test.first ;
         while i >= l_test.first and i <= l_test.last loop
                 dbms_output.put_line (l_test(i)) ;
                 i := l_test.next(i) ;
         end loop ;
    end ;
    ===============
    Hello
    World
    ===============when using Forms, you would use TEXT_IO instead of DBMS_OUTPUT

  • HT4910 How to view my photos stored in icloud and manage those

    HI,
    How to view my photos stored in icloud and manage those

    Use the PhotoStream tab of the iOS photos app.

  • How do i deleat data in my icloud account?

    Rather the buy more storeage, how do I delete data in my icloud account and or start over?

    Hello,
    The majority of the space that is being used on your iCloud account is being used by the backup of your device. When your device, go to Settings>iCloud>Storage and Backup>Manage Storage. Turn off any applications that you do not need to have backed up, or turn off backup in general in Settings>iCloud>Storage and Backup.

  • How do I retrieve or reset my iCloud password?

    How do I retrieve or reset my iCloud password?

    If you forgot the password, you can't retrieve it, but if you want to change it....
    iCloud: Change your iCloud account password - Support - Apple

  • How do I retrieve documents from my iCloud that i made in pages

    How do I retrieve documents from my iCloud that i made in pages

    Welcome to the Apple community.
    Your question is a little unclear, however if you mean how can you retrieve documents you have created on your iOS device on your Mac, then you need to download them at iCloud.com using the web browser (Safari or similar) on your mac.

  • How to display retrieved data from DB on web page

    Dear all,
    how to display retrieved data from oracle database on web page,Does anyone can give me an simple example?
    thanks
    WJ

    Hi,
    I use JRun tags but you can use Oracle tags or just JDBC... First u need to install jdbs connection and set e connection by using JMC (For JRun) named nomad.
    U can also try the link below for JRun tags..
    http://wds.its.uiowa.edu/cache/docs/jrun/html/JRun_Custom_Tag_Library/contents.htm
    <%@ page import="java.sql.*,javax.sql.*,java.text.*,allaire.taglib.*" %>
    <%@ taglib uri="jruntags" prefix="jrun" %>
    <%@ page contentType="text/html; charset=ISO-8859-9" %>
    <html>
    <head>
    <title> Test Page </title>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-9">
    </head>
    <body>
    <BODY BGCOLOR="#FFFFFF" LEFTMARGIN=15 TOPMARGIN=20 >
    <jrun:sql datasrc="nomad" id="q1">
    select empno,
         ename
    from emp
    order by ename
    </jrun:sql>
    <center>
    <table border = 0 cellpadding = 3 cellspacing = 1>
         <th>EmployeeNo</th><th>Name</th>
    <jrun:param id="q1" type="QueryTable"/>
    <jrun:foreach group="<%= q1 %>">
                   <tr>
                   <td> <%= q1.get(1) %> </td>
                   <td> <%= q1.get(2) %> </td>
                   </tr>
    </jrun:foreach>
    </table>
    </center>
    </body>
    </html>
    ----------------------

Maybe you are looking for

  • How do I get past the iTunes screen on my new iPad? Do

    Do I have to sync to computer?

  • Hyperlink within Composition issue

    In the attached page I have a PSD button hyperlinked to another page - see blue "FlatHat" button. It is placed inside a Composition. I cannot get this or any other hyperlink, when placed into a composition, to work on an iPad. Is there a way to fix t

  • Error in running the Financial Brokerage System (FBS)  sample application

    hi, i hav successfully compiled and deployed the FBS app in Standalone OC4J903. Jedeleoper IDE verion - 903 preview When i try to run the app using : http://mymachinename.com:8888/ibfbs/controllerservlet I get the following error : Error in Admin Man

  • Absolute newbie question

    Folks, I'm talking a java class in my "spare time" and just getting started this week. I'm also very new to linux so it makes things tricky for me figuring out where my problems are. I'm copying code out of Deitel just to try to get something to comp

  • Informs

    i have a inform and i can see it in the TCODE GRR3, its a standard report, but the field KOKRE (Society) its a parameter, i only can put a single value, i want a report just like that one but with the option of many societys, i copied the inform into