How do I retro lock my network

How do I lock my network? It's never been locked.

How do I lock my network?
What device is providing your wireless network signal?

Similar Messages

How can i find out which network my iphone is locked to

Sorry if iv posted this in the wrong section.well the question is quite simple. how can i find out which network my iphone 4s is locked to, without purchasing sim cards from every network.
I just bought the phone second hand with no sim as a birthday present for my wife with the intention of getting it unlocked (not jailbroken)
If any body can give me any advice it would be greatly appreciated.

call Apple

How do I find out what network my iPhone is locked to, How do I find out what network my iPhone is locked to

I just got an iPhone 3 online and it's network locked how do I find out what network it's locked to

You may be able to call Apple Care and ask them. If it originated in the US, it is locked to AT&T.

HT4582 hi I have bought an ipad mini which was advertised as unlocked, ipad has signal but says invalid sim, how to I find out what network it is locked to?

hi I have bought an ipad mini wich was advertised as unlocked to any network, when I put nano sim from giff gaff in the ipad says invalid sim, how can I find out what network it is locked to?

There is nothing on the iPad itself that can tell you. Did you buy it from a reputable retailer? You can try asking them.

HT1338 how do i lock my network home network to prevent others from accessing

How do i lock my network and prevent others from access the internet from my home system?

Several ways which can work toghether.
Setup the WiFi with a good password and a WPA safety.
Create an hidden network
Setup a list of MAC adresses whic are the only allowed to connect to your WiFI network.

How do i create a little network with my i-mac and macbook

how do i create a little network with my i-mac and macbook

Hello:
To give a sensible answer, a little more information is needed.
I am guessing that you want to set up a wireless network as you have both a desktop and laptop.
There are some pretty good tutorials/articles in the knowledge base articles.
Barry

How to block one of wireless network

Hi there,
I have Airport Extreme with 2 wireless networks, one for my iMac and my wife’s iPad another one is for kids PCs. All of us are connected only wireless.
Question, how shall I block the kids network my configuration, now when I block the Airport (Turn Off Airport) actually it’s only me who cannot use wireless network, all others still can do it. Purpose is to block the kids using the wireless network during the night. Now my solution is to pull out lan cable between Airport and ADSL modem.
I believe there must be smarter way to do it, I just don’t know how. Could you please help,
thanks

Hello!
Your Extreme can set time restrictions on when specific computers can access the network. You can configure them using AirPort Utility:
Open AirPort Utility, select your Extreme in the sidebar, and press "Manual Setup." If you're asked for a password, enter it. Go to the "Access Control" tab and set "MAC Address Access Control" to "Timed Access."
Now you can set up the time restrictions.
To add a computer to the list, press the "+" button. You'll be presented with a dialog that will let you configure the time restrictions. You'll need to enter the device's MAC address. You'll also want to enter a description so that you'll know what device the restriction applies to.
You can double-click the "(default)" entry to set restrictions on computers not on your list. When you're finished, press "Update" and allow your Extreme to restart.

Can I use my airport to see how many devices are on my network?

Can I use my airport to see how many devices are on my network?

No, that info was removed from the airport utility at v6 toyland edition.
The last real utility was 5.6.1 and although it is not actually supposed to work on AC model it does sometimes.
But you can generally see what is on your network using the netstat command in the computer..
Open the network utility and go to the netstat page and run scan.. this can take a few minutes.. and should show all the clients as well as the router/s. At least all the ones the computer can see.
The network utility is under utilized as people seem to not know of it.
There are iOS tools like this as well. Sorry but I don't remember the name/s.

How to delete the photos in network folder while deleting photos in iPhoto?

Hi,
How to delete the photos in network folder while deleting photos in iPhoto?
I have emptied the iPhoto Trash but the photos in network folder are still not deleted.
In iPhoto Preferences, Advance, Importing, I have UNCHECKED "Copy Items to iPhoto Library."
http://img.photobucket.com/albums/v432/philipcs/Screenshot2009-10-26at120221AM.p ng
Please help. Thanks.

iPhoto is a relational database management program and manages only items that it controls - items within its library - it does not and will not do anything with any photo that is not in the library except to delete photos from cameras after import - and this is not recommended
You are running a referenced library and it is not recommended - it makes deleting photos more difficult as you are seeing, it makes importing photos more difficult and it makes replacing or upgrading hardware much more difficult
LN

How can I delete the guest network from my airport. It was fine until the last update. It says my whole name's guest network which I do not want everyone seeing. There is no guest network setting in my airport utility.

How can I delete the guest network from my airport. It was not showing up until I recently upgraded the airport. It now says my name's guest network and I don't like my name showing on the available network list! I am using a Verizon wireless modem with the wireless feature off.

Open AirPort Utility, go to the Wireless tab and remove the check from the guest network check box.

How can I delete a wireless network from my MacBoork Ai

How can I delete a wireless network from my MacBoork Air.
I had set up a WEP Network but I need to set up a WPA (personal) network now and i cant seem to change the WEP network to a WPA2 network.
Thank you for any help you can provide me.
LShaps

The MacBook Air will autodetect WEP and WPA security changes and should allow you to reconnect again. If the password stored in the Mac is wrong, it will ask you to enter it again.
With that said, to forget a network do the following:
- Go to the Apple Menu and select System Preferences
- Click on the Network icon
- Highlight the Airport / WiFi entry (sepending on 10.6 vs 10.7)
- Click the Advanced button at the bottom
- Make sue the Airport / WiFi tab is selected
- Click on the network name you want to forget
- Press the minus button at the bottom of the list.
You may also want to consider restarting if you are having this issue.

How can I freeze (lock) my Spread Sheet layout in Numbers?

How can I freeze (lock) my Spread Sheet layout in Numbers?
I have problems with Numbers changing my Spread Sheet layout
by adding extra Rows while I am not looking, or while I engage in dragging its pages with the mouse to see info on adjacent pages.
The layout I use consists of a Spread Sheet containing 4 "print" pages, ea. 8.5" x 11" wide, with a total of 36 Rows and 28 Columns.
The SS is filled with new cell values daily, but the formulas stay mostly the same. The print pages are visible on the computer screen side by side, and each Row extends over these 4 pages.
It happens sometimes that I have to change a formula while making entries on a cell in "page 4", and then need to "accept"
the new entry and formula "aaalll" the way on the very left of "page 1". So here I try to scroll left or drag the present view
with the mouse. I also have to use the "Zoom" at 150 % because I cannot see well on my MacBook Air, everything is rather small.
I suspect that during dragging with the mouse I drag cells or rows without knowing, and that this will add extra Rows derailing some formulas or values because a cell is suddenly in a different Row.
It is difficult to find which Row was added and what values where thus changed. One just sees 38 rows instead of the orihinal 36! The only way is to move all the cell values out of rows 37 and 38, and find where theey used to be on the previous day's saved locked sheet. Needless to say that when that happens twice in a days work, it means a lot of lost time.
I have checked the Numbers Manual and searched Help Info for ways to lock an established cell layout and could noy find anything.
I cannot believe it, maybe I missed something. I worked for about 35 years with Clarisworks and Appleworks Spread Sheets and never had the same problem, layouts were locked by design, and could only be changed by special procedures.
Now is there a way to freeze or lock the basic layout of a spread sheet in Numbers?
I appreciate your help. (Numbers 2.3, Mac OS 10.8.5. MacBook Air)

Hi Numbers22,
I guess I was just beating around the bush to avoid simply saying, "No, you cannot lock the layout." So there it is.
I am not sure why you are scrolling to "accept" a formula. That is unclear. I guess you building a new formula and need to use a cell from an early column. It is also unclear to me as ot how you are actually adding extra rows. I haven't been able to do it on my machine without clicking the little arrow in the row number or using Option-↑ (or -↓). Option-↑ would add a row above the row you are in if they somehow got pressed. Do you have a program running that could be interpreting something your are doing for those keystrokes? If I was standing at your shoulder I might be able to see what is doing it.
What I am suggesting is that you play around with your trackpad settings so that you are not selecting and tapping in your table while you attempt to scroll. I do have one sheet with two tables side by side with a total of 425 columns and I can scroll past them without modifying them. So perhaps turning off tap to click in system preferences will help. If you have an option to decrease trackpad sensitivity then try that (I don't, but I remember having it somewhere in the past). If you are using a mouse see what you can do to decrease the sensitivity for a click. If your computer is old it could be that the trackpad is wearing out and throwing random clicks. You might try using another input device if you have one.
quinn

How to get retro pay in payroll

How to get retro pay in bw.

I have the same issue. payslip shows the retro amounts correctly, but i can't figure out how to get the right amount using the data found in the RT table..
one thing i got is, when all retro amounts are added up, less the deductions and adjustment in retro the value is equal to that from wage type /552.. but i can't figure out how to get the breakdown using RT data..
retro amounts have the letter "R" before each wage type.
edit:
i found this program RPCLGA00.. it shows the right values/amount for each wage type, including retro.. but i am still unable to figure out how i can arrive at the same values using RT data.. can someone help me understand the program?
Edited by: Janus Arcellana on Jan 12, 2009 11:23 AM

IPhone 3G: How to stop from joining unknown networks

When I first got my iPhone I got to work and a wi-fi network named "Guest" popped up. Being new to things, I clicked on it. Of course nothing worked. I went to a web page and a page popped up asking for a password. I have no idea what the password is, and it's not available to the general public.
That night, I went home and hooked up to my personal wireless LAN, and the wi-fi works great.
Problem: If I leave wi-fi on, when I leave the house, the iPhone switches to 3G. As soon as I get to work, the phone connects to the "Guest" network and nothing works. I have to then turn off wi-fi to get things working.
Question: How do I deselect this "Guest" network so my phone doesn't automatically try to connect to it. I don't mind it asking me, but it no longer asks since I selected it on time. I still want my home network to auto connect without asking, but not this work network.
Hope someone can help. Thanks.

Tap the small blue arrow next to "Guest"
There's a big button at the very top that says "Forget this network"

How to find out Locks on the database objects

how to find out Locks on the database objects

The following notes should be helpful:
Note: 200590.1 - bde_session_locks.sql - Locks for given Session ID
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=200590.1
Note: 1039273.6 - SCRIPT: VIEWING LOCKS ON OBJECTS HELD BY SPECIFIC USER
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=1039273.6
You can also search Metalink, there are many notes/scripts published there which would be also helpful.

How do I retro lock my network

Similar Messages

Maybe you are looking for