How do I return my faulty Philips Hue bulb to Apple UK

According to Philips, my bulb is faulty and I should return it to Apple UK, where I bought it from. I can't find any information on how I do this. There's no email address or physical address anywhere on Philps or Apple's site and I'm going round in circles here. This hardware is expensive and I'd like it replaced. It shouldn't break after 10 months.

After 10 months it's doubtful that the Apple Store will handle a defective third-party product, though you can call them and ask. Most likely you'll need to arrange service directly with Philips. Perhaps this web page will help:
http://www.support.philips.com/support/service/service_page.jsp?userLanguage=en& userCountry=gb
Regards.

Similar Messages

Wanted to buy Philips Hue bulb but payment not going through

Hi, I'm from India & want to buy Philips Hue bulbs. But the payment is not going through. I have tried with 3 credits cards that i have, but didn't go through. I was able to buy the starter pack of philips hue a month ago & i got those bulbs here with the help of my friend in USA. Now i tried with same credit card but was not able to buy.
Also searched though whole site & couldn't find email id where i can send mail to customer support. Apple site takes you round & round through their site but no email id to be found.
Hope some customer support person see's this post.

Hi Manoj,
I would recommed getting it from a European country or from the UK which has a 220-240V supply. The US bulbs are 110V and i've read some conflicting reports on their compatibility with a 220-240V power supply (India). It turns out to be expensive if you buy it from UK as compared to the US but at least there will be no doubts about it working. You may just be taking a chance plugging a US 110V directly in India but if you already have tried it then please share your experience here.
All the best!!
Regards,
Hanoze

How to confugure airport to connect to philips hue website

how to confugure airport to connect to philips hue website

Sorry, but I'm not familar with the Hue product. From what limited information I can gather the Hue Bridge attaches to an existing router via an Ethernet connection.
To link the bridge to the meethue website the bridge would just need to be connected to the same network that your computer is connected to. Then, it would be a matter of using a web browser on the computer to go to the meethue website and login. Is logging on to this website the issue? If so, does your computer have any issues accessing other websites?
I am assuming that when you set up the Hue Bridge that all of its status lights were solidly lit ... correct?

Philips HUE Lights with iPad/iPhone

I've had ups and downs with my first weekend with Philips Hue lights. Overall love it with so many questions. No one at the Apple Store where I live has experience with it.
First, I downloaded the app to both my iPhone 5 and to my iPad Air. Big mistake. The Meet Hue website only accepted one device and refused to accept the iPhone device after installing on both devices (instructions MINIMAL) so I thought I had to say good-bye to geo-tracking and the portal since I don't carry the iPad routinely (besides I leave some lights on for the doggies). I tried everything to get Hue to accept the iPhone but error message was that the portal would not accept me because "the bridge linked to your account is different from your local bridge." Tried everything. The iPhone was never listed as an app in My Hue just the iPad. FINALLY, I deleted the app in the iPhone and reinstalled the app in the iPad and all worked and I could work with the portal.
Secondly, the starter kit worked with the scene samples but not the three extra bulbs. The three extra bulbs in the adjoining bedroom could be turned on and off and the slider toggles in the app could be used to modify color. I could also select photos from my photo stream to use to drag all 6 bulbs onto to light a;l 6 bulbs and not just the three i the starter kit but i couldn't send the finished project to the website since the iPhone wasn't recognized. Again, after going back to the iPad, the portal re-opened and everything seemed to work just fine. I did notice on a few occasions that colors of the bulbs returned to default a few times.
Questions questions questions.
This morning only two lamps would turn on with my iPad app so I turned all lamps on manually and then started the app again and all was well. I imagine it was a wifi connection issue. Still thrilled, however.

You would probably have better luck if you asked your questions on one of the Phillips forums.
See: http://www.everyhue.com/?page_id=38

How can I return my ipad 1 to pre OS5?

how can I return my ipad 1 to pre OS5?
Ive been reading the forums all over the place to find the solution to my ipad 1 continually crashing. it does it mainly in safari and the app store.
Its really annoying when you're halfway through composing a long e-mail message and it just reverts back to the home screen.
I'm perfectly happy to give up the advantages of IOs 5, because I would rather have a stable machine (like it used to be) than use the cloud and multitasking. (I don't use them anyway). I know that some of my apps might stop working but its more important to me that the basics work.
cheers
Andy

You cannot downgrade the iOS. Once you upgrade, you're stuck with it.
Part of your problem is that your iPad is old and it probably having difficulty keeping up with the data and protocols for the newer software. It's probably time to send a note to Santa.

How to get return value from Java runtime.getRuntime.exec?

I'm running shell commands from an Oracle db (11gr2) on aix.
But, I would like to get a return value from a shell comand... like you get with "echo $?"
I use a code like
CREATE OR REPLACE JAVA SOURCE NAMED common."Host" AS
import java.io.*;
public class Host {
public static int executeCommand(String command) {
    int retval=0;
    try {
        String[] finalCommand;
        finalCommand = new String[3];
        finalCommand[0] = "/bin/sh";
        finalCommand[1] = "-c";
        finalCommand[2] = command;
      final Process pr = Runtime.getRuntime().exec(finalCommand);
      pr.waitFor();
   catch (Exception ex) {
      System.out.println(ex.getLocalizedMessage());
      retval=-1;
    return retval;
/but I do not get a return value... because I don't know how to get return value..
Edited by: user9158455 on 22-Sep-2010 07:33

Hi,
Have your tried pr.exitValue() ?
I think you also need a finally block that destroys the subprocess
Regards
Peter

How do I return two values from a stored procedure into an "Execute SQL Task" within SQL Server 2008 R2

Hi,
How do I return two values from a
stored procedure into an "Execute SQL Task" please? Each of these two values need to be populated into an SSIS variable for later processing, e.g. StartDate and EndDate.
Thinking about stored procedure output parameters for example. Is there anything special I need to bear in mind to ensure that the SSIS variables are populated with the updated stored procedure output parameter values?
Something like ?
CREATE PROCEDURE [etl].[ConvertPeriodToStartAndEndDate]
@intPeriod INT,
@strPeriod_Length NVARCHAR(1),
@dtStart NVARCHAR(8) OUTPUT,
@dtEnd NVARCHAR(8) OUTPUT
AS
then within the SSIS component; -
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Below execute statement should work along the parameter mapping which you have provided. Also try specifying the parameter size property as default.
Exec [etl].[ConvertPeriodToStartAndEndDate] ?,?,? output, ? output
Add a script task to check ssis variables values using,
Msgbox(Dts.Variables("User::strExtractStartDate").Value)
Do not forget to add the property "readOnlyVariables" as strExtractStartDate variable to check for only one variable.
Regards, RSingh

How do I return an unopened refurbished iBook for a complete refund?

I ordered a refurbished 14 inch ibook a while ago and it has been sitting in an unopened box ever since. It cost about $1050. I bought this before the new intel MacBook's came out, and now that they are out, they are much better than the ibook's. Plus the iBook 14 inch is a weird ratio.
How would i return my unopened ibook for a complete refund and only pay like 50 bucks more for a new macbook?

Welcome to Apple Discussions!
It depends on the store you bought it from. Read the policies of the store you bought it from, if they are posted on the web. Your "awhile ago" doesn't tell us anything about the number of days. If you have no idea when you bought it, but bought it by credit card, you can usually call the store and ask them with your credit card number to verify when that was. Most stores I've seen have a time limit on returns. Some do not accept refurbished products back. It is best to check with the individual store.

I just updated iOS on my iPhone 5. What a shock!! Where is the premium look and feel I bought my iPhone for? If I wanted the lokale feel of iOS 7.0 I would have bought a much cheeper taiwanese smartphone. Please let me know how I can return to the origina

I just updated iOS on my iPhone 5.
What a shock!! Where is the premium look and feel I bought my iPhone for?
If I wanted the lokale feel of iOS 7.0 I would have bought a much cheeper taiwanese smartphone.
Please let me know how I can return to the original look and feel of the iPhone surface I bought my phone for.

You had plenty of time to look at screenshots on the internet and read various blog posts about iOS 7.

How can I return multiple values with PL/SQL Web Services

Hi,
I'm new to developping Web Services. I'm doing some tests with JDeveloper and OC4J on my local machine with a Web Services based on a PL/SQL function within a package. Right now that function only returns one value. So the xml response only has one output.
I'd like to know how can I return multiple values with my PL/SQL Web Service. For example, if I want to return an employee's name and id? And that the xml contains two output : <employee>, <empid>?
Reginald
ps : I have searched the forum and I couldn't find an answer to this question, if that has been discussed AND answered before, can you please post the link? Thanks

Alright, I actually found my answer. Since this was asked I think as a followup somewhere else I'll give my answer.
It is very simple, all you have to do is create an Object Type and then Return that object type. After that, JDeveloper will take care of everything and you will have an xml response with multiple values. Here
{color:#ff0000}
create or replace TYPE person AS OBJECT
( id_interv number,
first_name VARCHAR2(50),
last_name VARCHAR2(50),
date_birth date
);{color}
Then your function used in your Web Service should look something like this :
{color:#ff0000}
function info_emp (p_empno IN VARCHAR2) RETURN person AS
l_emp person := person(-1,'','','');
BEGIN
SELECT first_name
,last_name
,emp_no
INTO l_emp.first_name
,l_emp.last_name
,l_emp.emp_no
FROM emp
WHERE upper(emp_no) = upper (emp_no);
{color}
{color:#ff0000}
RETURN l_emp;
EXCEPTION WHEN NO_DATA_FOUND THEN
l_emp := person (-1,'n/a','n/a','n/a');
RETURN l_emp ;
END info_emp;{color}
{color:#ff0000}{color:#000000}After that, this is what the xml response looks like :{color}{color}
<first_name xsi:type="xsd:string">John</first_name>
<last_name xsi:type="xsd:string">Doe</last_name>
<emp_no xsi:type="xsd:string">0250193</emp_no>

How do I return an e-library book on adobe digital editions?

How do I return an e-library book on adobe digital editions?

You should ask in the Digital Editions forum,
http://forums.adobe.com/community/adobe_digital_editions
This is the Reader one.

IDVD 08 is a bummer. How do I return to an older version?

I had iLife 04 on my Mac for ages, but I just bought and installed iLife 08.
Mistake!
IDVD 08 will not open any of my old iDVD projects; it just sits there with the beachball spinning or doing nothing at all. All the old projects now have the blue and white iDVD 08 icon, but they don't open. Likewise "Open Previous Project" doesn't work.
So, I attempted to recreate some of my old projects in iDVD 08 by dumping the Quicktime movies that were originally used to create the old iDVD 4 projects (QuickTime movies that were exported from Final Cut Express), but I can't seem to drag and drop them into iDVD's background like I could with iDVD 4. When I drag the icon of the QT movie over into iDVD's window, the + sign does not appear, indicating that it's ready to drop, and when I let go of the mouse button, the QT movie's icon returns to the folder where the file resides.
Most of the time, when trying to open or create any project, iDVD just sits there with its beachball spinning, or does nothing at all, so that I have to force-quit it (and then I trash the .plist).
This version of iDVD seems like a real bummer. I can't get it to do anything.
How do I return to iDVD 4? Can I Trash iDVD 08 and then reinstall iDVD 04 from the iLife 04 DVD?
Tom

Very rarely do I recommend reverting to an older version of iLife once the current version is already installed. But in your own situation, perhaps this is best ..... given the fact apple's iLife'08 isn't intended for a G4. You need a G5 or better for iMovie apparently within iLife 08. iDVD's system requirements call for at least a G4 733. But I haven't seen anyone post on this iDVD forum who has the latest version of iDVD successfully running on a G4.
Use the following app at your own risk to remove iDVD:
http://appzapper.com/
Good luck!

How can I return to the same position in the calling order details form

I am Calling a form for creating a new item from order details form, so after creating The new item I want to returned the item code to the calling form to same position in The order details form , how can I return to the same position in the order details form
Waiting for your valuable answer .
Best regards
Jamil Alshaibani

Dear Friends
My actual problem description as the following
I have a form for production order screen , and this form contain header and details blocks , so the user in the details will select Type Code , and he will go the next field that is Item Code Field search for specific Item Code if it is not exist he has to call the Item Definition Form by using this script
CALL_FORM(ITEM_DEFINITION);
Then when he finished defining the Item , and I assign the item code as the following in the :
WHEN-BUTTON-PRESSED TRIGGER
:GLOBAL.ITEM_CODE_VAR := :ITEM_CODE;
DO_KEY('exit_form');
But I don't know where to keep this assignment
:ITEM_CODE := :GLOBAL.ITEM_CODE_VAR;
inside the caller form in which trigger do I have to use when it return from the caller form it should assign the :GLOBAL.ITEM_CODE_VAR to the :ITEM_CODE and the cursor it should show inside the ITEM_CODE , and as I mention it does not return to the same location of The ITEM_CODE when it return from the calling form
Waiting for your valuable answer .
With example please .
Best Regards
Jamil Alshaibani

How can I return to the Classic address book 3 pane view?

How can I return to the Classic address book 3 pane view & get rid of the stupid fake leather and same for iCal?

I asked the same question at the Apple Genius Bar a week or so ago and they said there was no way to change it. I am with you - do not like this new format at all and would love it if Apple would offer both -maybe when they do an "fix" next? This was one change in Lion that should not have been made from Snow Leopard. I am really sorry I upgraded at this point.

How can I return to the top of an array indicator

I have in my UI a 1D array indicator that I will navigate to and populate with different lists of items depending on other selections. Always text elements.
I have limited the number of visible rows to 20 max even though some lists will contain dozens if not hundreds of elements while others may have less than 10. Problem is, if I scroll down the list for one population, then come back and the next list happens to have only 10 elements, the scroll bar is still way down where I had scrolled to earlier. It is basically showing unpopulated positions in the array. (Not blank list items)
How can I return the scroll position back up to the first element in the array when I populate it with a new list? I looked through every property node and could find nothing. Seems like there should be a method to refresh the display or it should go back to the top when you write a new value to it.
Any thoughts?
Thanks
Doug
"My only wish is that I am capable of learning each and every day until my last breath."

Index Values, I think, is the property you are looking for. Set the index to 0 to be at the top.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How do I return my faulty Philips Hue bulb to Apple UK

Similar Messages

Maybe you are looking for