How do I revalue inventory for change in cost?
Hi,
How do I revalue inventory for change in cost? BOM exists for manufactured Portland cement, backflusing relieves inventory per this BOM, however, old cost still appears as valuation for this product. I did a cost estimate for this product (2000000004), marked, and released this product. Effective date of this BOM was 07/01/2009.
kindly help me
Thanks
Suvarna
Dear Suvarna,
Once after taking a new released cost estimate for a product,it's stock gets automatically revaluated as per the new price or
say new value.
Can you please confirm whether in the accounting view of the material master you are able to see the last price change date is
same as your cost estimate date.Only then it means the new price was marked and stamped properly and based on the new
standard price the stock get's valuated automatically.
There is no other transaction required for this process.
Check and revert back with your further queries.
Regards
Mangalraj.S
Similar Messages
-
How to change price total for "Change Unit Cost Estimate Screen" for KKE1 Tcode ?
There is a requirement of bringing the Material Price in KKE1 while entering the Item Catogory M ( M for Material) from the Gross Price in the condition type (P001) that is entered in the Purchase order.Currently systems brings the material value from MAP(Moving average Price) in the Material Master data.
I have looked into the user exit 1) EXIT_SAPLKKEC_001 2) EXIT_SAPLKKEC_002 available in this T code KKE1.When I put break-point in these user-exit,it is not going in debugging mode while fetching the price value in Price total column for "Change Unit Cost Estimate" screen in KKE1.
How will change pricing condition for material in KKE1?
I want to change price condition for material as marked in red as shown in the screen-shot.
Where will write the code such that I will bring Price Total based on material number as shown in the image?Hi Ram,
I think you can do the same in thei manner.
Go to program SAPMV45A.
use menu GOTO -
> Text Elements----
>Text Symbols
Here make change of Text-002 Sold-To Party as saleable .
Regards,
Pravin -
How to create the request for change of selection text into other language.
Hi,
In my object requirement is that when login through Japanese language, then on selection screen selection text should appear in Japanese language. For that I have maintained the text in Japanese language the program where we define the selection text there from translation I have maintained the text in Japanese but while maintain the text it didn't ask me for REQUEST, because of that I am not able to transport the changes to next system, so I want know how to create the request for this case.
ThanksHello Chetan,
You could goto the selection screen texts by goto-> selection texts,
Then you could again goto -> Translation
or
Other-> Translation(Not sure )
Then double click on the Program you should be able to see the Texts that need translation, now change something save and come back and try to activate, now it should propose for a new Transport Request.
Either create a new transaport request or give one that you have given for the program.
Hope the issue is resolved. -
How to find the workflow for Change Request for the PO's
Hi All,
We have a PO which is pending and we can't receipt it again nor make payment on this. After checking the Approval history for that PO we found that the change request has been made. The change request was to change the amount to be paid to R39196 instead of R58237.00. We don't know where to check the workflow for the change request to identify the cause.
what i need to know is how to find the workflow for that change request? The other workflows can be checked using the po_header_id for the PO's but i am confused with the change request workflow
Your input will be highly appreciated.
Thanks in advance
Rgds,
SoniaFor 11.5.10.2 run this query to determine the keys to search on:
Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'PO' and Document_num = 'put-PO-number-here'
Then use the keys returned by the query to look up the Workflow in
Workflow Administrator Web Applications / Administrator Workflow / Status Monitor
Search using the results returned in fields "Type Internal Name" and "Item Key" in Status Monitor
The query for change requests on a specific Requisition would be:
Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'REQ' and Document_num = 'put-Req-number-here' -
How can I fix waiting for changes to be made and error -54 during sync with 7.1.2
After updates my iphone5, ipad mini and ipad 3 to ios 7.1.2 cannot sync any of them due to error-54 or waiting for changes to be applied. Was able to sync all before this update. What is wrong? How can I fix?
Eject the device.
Close and relaunch iTunes.
If the problem continues, restart the computer and the device. -
How to maka an userinterface for changing comports
Hi
I need to to an exe with LV code, that has an easy to use interface for changing comports.
The comport change interface is only to be seen when the user chooses to change comport, once this is done the menu is to disapear untill needed again.
I'm using LV 6.02.
I need examples please!
J;-)Hi,
Insert this subVI in any place of your diagram, where you want to reinit serial port settings.
Good luck.
Oleg Chutko.
Attachments:
Ser_Set.vi 48 KB -
Table for change in cost center in Kb61
Dear friends,
I changed the cost center using t code KB61, From which table i can get the details of change in cost center
Rgds
MadhavanHi,
KB61 will post the document with the change from old cost object to new cost object in CO documents, so you can check the following tables for this posting.
CO document Header: COBK
CO document items:COEP
CO summary table:COSP (or COSS)
best regards, takashi -
How to use BAPI Program for change workcenter in co02?
Hi Abapers.
Anybody please tell me how to change the workcenter in CO02 using BAPI Programe.
Please give me sample of this.
I will give urs reward of points.
Thanks
Regards,
S.Muthu.Hi,
Use the Function module CR_WORKCENTER_UPDATE
for workcenter change.
It is an update function module so you have to call it in update mode with a COMMIT statement to trigger it.
CALL FUNCTION CR_WORKCENTER_UPDATE IN UPDATE TASK
exporting...
imporing..
COMMIT WORK.
Note: only after the commit statement the function module will be called in update mode.
Regards,
Raj. -
How does the delta works for changes made to Sales Document
Hi Experts,
How does delta for 2LIS_11_VAITM for the changes made to Sales Order Header.....
Example:
If a sales order had 10 line items any changes at the item level are captured by 2LIS_11_VAITM
Could you please update me on how the changes made at Sale Order Header level like Change of contract Date...etc
Does those changes are captured by 2LIS_11_VAITM.......
Please updateHi,
SAP written lots of programs inside the Extractor, so it is not possible to tell how it will work, so you goto RSA2 in ecc and give the datasource and click on display and see the Function module and debug it you will know.
Thanks
Reddy -
How to catch the event for change dropdown value in alv
it has a column output by dropdown in alv. the dropdown type cl_salv_wd_uie_dropdown_by_idx.
now the problem is if change the dropdown value, i want to catch the event to change another column value.
how can i do it?This part contains other ALV initialization code
*... init ColumnSettings
DATA:
lr_column_settings TYPE REF TO if_salv_wd_column_settings.
lr_column_settings ?= wd_this->r_table.
DATA:
lt_columns TYPE salv_wd_t_column_ref.
lt_columns = lr_column_settings->get_columns( ).
DATA:
ls_column TYPE salv_wd_s_column_ref,
lr_col_header TYPE REF TO cl_salv_wd_column_header,
l_tooltip TYPE string.
LOOP AT lt_columns INTO ls_column.
CASE ls_column-id.
WHEN 'PLANETYPE'.
DATA:
lr_drdn_by_key TYPE REF TO cl_salv_wd_uie_dropdown_by_key.
CREATE OBJECT lr_drdn_by_key
EXPORTING
selected_key_fieldname = ls_column-id.
lr_drdn_by_key->set_key_visible( abap_true ).
ls_column-r_column->set_cell_editor( lr_drdn_by_key ).
WHEN OTHERS.
ENDCASE.
ENDLOOP.
DATA:
node_info TYPE REF TO if_wd_context_node_info,
lt_valueset TYPE STANDARD TABLE OF wdr_context_attr_value,
l_value TYPE wdr_context_attr_value.
node_info = wd_context->get_node_info( ).
node_info = node_info->get_child_node( 'FLIGHT_INFO' ).
data : lt_sflight type STANDARD TABLE OF sflight,
ls_sflight like LINE OF lt_sflight.
SELECT * from sflight into TABLE lt_sflight.
LOOP at lt_sflight into ls_sflight.
l_value-value = ls_sflight-planetype.
l_value-text = ls_sflight-planetype.
INSERT l_value into TABLE lt_valueset.
ENDLOOP.
node_info->set_attribute_value_set(
name = 'PLANETYPE'
value_set = lt_valueset ). -
How to access a table for changes
I'm iterating through the Pgf objects in a flow, and for each one I look for table anchors. I find the table anchor, then what do I do to access its Tbl object and do things with it? I'm just trying to find out if there are any changebars in the table. I don't think using Doc.FirstTblInDoc will help me because I'm starting with a TblAnchor text item.
I run this code on a doc that has only one paragraph with a table anchor in it:
function test() {
doc = app.ActiveDoc;
var pgf = doc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;
while ( pgf.ObjectValid() ) {
var textitems = pgf.GetText(Constants.FTI_TblAnchor);
var aa = textitems[0];
Console('what is this: '+aa);
pgf = pgf.NextPgfInFlow;
This prints "what is this: [object TextItem]".
Seems like I should be able to do something like this to get the Tbl object:
myTable = textitems[0].idata;
Am I warm? Once I get the Tbl object, I'm hoping it's a simple matter of using GetText to get changes, then finding a changebar.
Thanks,
MarkHere's the working code I ended up using to search through a table and find out if it had any changebars.
Mark
// Find a changebar in tables. The context is iterating through the Pgfs in a doc.
function findChangebarInTable(pgf) {
var tableitems = pgf.GetText(Constants.FTI_TblAnchor);
// If no table anchors, return now.
if (tableitems.length == 0) { return; }
for (var i = 0; i < tableitems.length ; i += 1) {
// get table using table anchor.
var table = tableitems[i].obj;
cellChangebar = searchCells(table);
// If there's a changebar in any table, return.
if (cellChangebar) {
return true;
// Search the cells of the table for a changebar.
function searchCells(table) {
var tcell = table.FirstRowInTbl.FirstCellInRow;
while (tcell.ObjectValid()) {
// Get changed items in this cell.
var cellitems = tcell.GetText(Constants.FTI_CharPropsChange);
for (var i=0; i < cellitems.len ; i +=1) {
// Find out if the Cell has a changebar.
// The result of the bitwise AND (&) must be greater than 0 or no changebar.
var c = cellitems[i].idata & Constants.FTF_CHANGEBAR;
if (c > 0) {
return true;
tcell = tcell.NextCellInTbl; -
How do I generate DDL for changes in model
Hi
I'm using SQL Developer 4 to mantain my logical and physical diagramas. I know how to generate the diagram and generate DDL. But how do I only generate the DDL changes?
Regards,
Néstor BoscánBasically you want to compare the model with the data dictionary, see the big arrow buttons up on the main toolbar.
In depth answer here:
http://www.thatjeffsmith.com/archive/2012/03/diffs-and-alter-scripts-via-oracle-sql-developer-data-modeler/ -
Transaction code for change in cost of BOM component
Hi Gurus,
If BOM or any source materials has been updated in the system, the header material need to be re-costed. Is there any existing T-code to get the list of the materials , the changed might impact to.
Regards
KaisarDear Kaisar,
There is no standard T code to meet this requirement wherein you get all the required details.
Only you have to identify and cost it using CK11N/CK40N.
If you are ECM - change numbers,you can identify the made changes by a customized report and then
you recost those materials alone.
Again its a very big customized development.
check and revert back.
Regards
Mangalraj.S -
HT1338 how much does the glass for a screen cost on a macbook pro
Trying to figure out what the cost is before wasting time going to tech support at an apple store and them having my laptop for 2-5 weeks.
https://www.techrestore.com/mac/
http://www.dttservice.com/macbookprounibody.html
http://www.myservice.com/macbookpro.html -
Hi,
How can we send mail for change in cost, budget, date ?
Also give some workflow related with PS.In std SAP internal mail is available for budgets
Please see transaction SWDM for standard workflows available in SAP
Please also read SAP help before posting such questions
Maybe you are looking for
-
How to change InputField background color using Java Code
Hi, In my application use will enter some set of Cost Centers in a table and submits request. In return i will get a list of invalid cost centers which i need to display in a table with input field In that table all cost centers will displayed, but i
-
Multi language AddOn I will like to know were can I find information on how to make a AddOn multi language available. Best regards. Edited by: Jose Villarreal on Apr 21, 2008 5:27 PM
-
I cant download apps. It keeps sayin 'unable to load. Try again later' I use my iphone to download. How do i get it to work?
-
Procedure doesn`t like 'distinct'
Hi, Ive written a simple procedure so that a job runs at a certain time every week,but i noticed that the job was being done more than once every week...and that this was due to more than one sysdate in the database.When I select sysdate from dual i
-
Release procedure for Document Park / Post
Dear FI experts, We want to set release procedure for Customer Credit Notes (FB75) For this we did following configuration - FI >> FI Global Setting >> Document >> Document Parking (all setting w.r.t. release approval) Created and parked a document u