How do I reveal the cut points when editing Adobe Connect recording?

Since the roll-out of AC 9.1, when I edit the timeline of a recording I see the timeline of the position of my cursor ON TOP OF the timeline point of the cut points, therefore I can't see where I'm about to cut a recoring. How to see the cut points when editing the timeline?
Thanks,
--Kevin

Hi Kevin,
There is a know bug for the black marker overlapping the time-line with a black marker.
But we have a trick to help you do your editing effectively. Follow the steps mentioned below and you will be able to edit your recording with precision:
1. Pause the recording from where you want to start your editing.
2. Double Click on the LEFT marker. It will take both the markers to that point on the recording timeline.
3. Play the recording and pause the recording again at the point till where you want to edit the recording.
4. Double Click on the RIGHT marker. It will take the right marker to the end point of your to-be-recording.
5. Cut and Save.
Do let us know if this helps!
Thanks
Sameer Puri

Similar Messages

Premiere Pro 2014 MultiCam forgets cut points when rendering (Adobe please help!!)

I have started using multi-cam and notice that almost always when using multi-cam the rendered results are incorrect - with many camera selections forgotten or flipped to exact opposite!
Very frustrating - especially since you discover after render!!
Many times when I select Camera A at some point and then later go to beginning of sequence - many of the selections have been reversed with reversal again at clip transitions - resulting in exact opposite of what I selected or random changes. Locking the tracks does not prevent this. It seems to be overriding my choices based on some program logic!!
This is with latest Premiere Pro 2014.1 {8.1 build)
Useless feature if you cannot get it to render your selections but rather random selection
Wish there was a manual! And not just incomplete video tutorials that are teaser for some associate's paid training (of unknown value).
Or at least quick forum / support response from Adobe representatives so I can be productive with the tooling.
Another week of no answers and I will have to recreate in FCP X where multi cam seems to work fine.
Not the best for brand loyalty, eh?
Please help

I'm thinking it might be operator error on this one. Here's a process that works every time.
1. Create a sequence matching the specs of your footage.
2. Add your clips.
3. Sync manually.
4. Create a second sequence matching the first.
5. Nest the first sequence into the second.
6. Right click on that nested sequence and choose Multi-Camera>Enable
7. Turn on the Multi-camera view in the Program Monitor.
8. Play the sequence in real time, switch angles using keyboard shortcuts. If you make a mistake, leave it for later.
9. When you're done with the first pass in real time, go back to the normal view in the Program Monitor.
10. Move through the sequence a second time, cut by cut, tweaking as necessary with the Rolling Edit tool (shortcut N).
On a side note, 2014.2 is actually the current version. You should update.

How do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it when you just play a slideshow.

how do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow. i know you can sort it by different fields, but i want it to be random. thanks.

If you want to rearrange images in random order you can try an AppleScript:
retrieve a list of selected images from Aperture
shuffe the list properly
create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
Here is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
on removeItem(ims, i)
-- remove the item at position "i" from a list ims
          if ims is {} then return {}
          if (length of ims is 1) then return {}
          if i < 2 then return rest of ims
          if (i = length of ims) then return (items 1 thru (i - 1) of ims)
          if i > (length of ims) then return ims -- should be error?
          return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
end removeItem
on shuffle_items(ims)
-- shuffle the items of the list "ims" randomly
          local numitems, ims_shuffled, nextrest, nextpick, i
          set numitems to length of ims
          if length of ims < 2 then return ims
          set ims_shuffled to {}
          set nextrest to ims
          repeat until nextrest is {}
                    set i to (random number (numitems - 1)) + 1
                    set nextpick to item i of nextrest
                    set beginning of ims_shuffled to nextpick
                    set numitems to numitems - 1
                    set nextrest to removeItem(nextrest, i)
          end repeat
          return ims_shuffled
end shuffle_items
on shuffleIms()
-- retrieve the selected images from Aperture
-- and display them in random order in full screen mode
          local imageSel, shuffled, i
          tell application "Aperture"
activate
                    set imageSel to (get selection)
                    set shuffled to my shuffle_items(imageSel)
                    set fullscreen to true
                    if imageSel is {} then error "Please select some images."
                    repeat with i from 1 to count of shuffled
                              reveal {item i of shuffled}
delay 3 -- chnage that to the time you want
                    end repeat
                    set fullscreen to false
                    return shuffled
          end tell
end shuffleIms
shuffleIms()
Some more code snippets to go from here:
To create an album:
                    tell library 1
                              if not (exists album "shuffledAlbum") then
make new album with properties {name:"shuffledAlbum", image version:shuffled}
                              end if
                    end tell
And to add the images from the shuffled list to the album:
                    repeat with i from 1 to count of shuffled
                              duplicate item i of shuffled to album "shuffledAlbum"
                    end repeat
Regards
Léonie

How do I "see" the AF point I choose with a Nikon D700/D3?

How do I "see" the AF point I choose with a Nikon D700/D3?
I hear a D3s and LR3.3 can see it.
AND, how do I turn it ON/OFF ?
HG

I was told by a D3s user that in LRv3.3   AF point used is shown
Seem to remember for some earlier version of LR   my e510 or e30 AF points was being shown.
My guess is you would only start looking at the AF points used ... when a Lens or body starts acting differently. or when it is not working as well as other gear you are using.
As my only   RAW software used ... I would like it to READ what is there in the Exif.
at least
AF distance (which was there in LRv2)
Shutter count (there in PS CS5)
and AF point used ... there in Aperture 3   ... and Nikon software.
Because LR s/b a PRO workflow software ... support for the Current PRO cameras should be expected    ... and that number is far LESS.
and for Nikon users it is D700/D3 series.    basically two cameras ... because my guess is the different flavors D3/D3s/D3x   of the one body , the reading of the AF point sb simular.
HG

HT3529 How do you change the settings so when you search your iPad it doesn't show the iMessages?

How do you change the settings so when you search your iPad it doesn't show the iMessages?

You could adjust the mailnews.tcptimeout preference, as explained in the 2nd point in [http://kb.mozillazine.org/Can_not_send_large_attachments this article]. Also, make sure there's no security program scanning outgoing mail attachments.

How do I show the focus point in Elements 12?

How do I show the focus point in Elements 12? There are times when displaying the camera focus point(s) in either the organizer or the editor would be very helpful in analyzing pictures. Is there a way to do this?

As far as I know this is a feature specific to a given camera manufacturer. Only their proprietary editing softwares can interpret the proprietary metadata...

How can i fix my iphone 3g if and only it displays the apple logo when it is connected to its charger but it displays nothing when the charger is removed?

how can i fix my iphone 3g if and only it displays the apple logo when it is connected to its charger but it displays nothing when the charger is removed?

Plug it into a wall outlet and leave it plugged in for approximately 20 minutes.
Then try a reset by pressing and holding the home and power buttons for 15-20 seconds.
Does the device power on at this point? If not, the battery or logic board is gone.
Take it to Apple for evaluation.
It may be worth replacing the battery, but I personally wouldn't spend the $149US for an Out of Warranty replacement on a 3+yr old device.

How do I select the entire text when the focus is moved to one TextBox?

How do I select the entire text when the focus is moved to one TextBox?
There are three TextBoxes. I use <TextBox TabIndex="1"/> to set the order they are selected. When I enter one specific TextBox, I would like to have the entire text selected ... one key stroke removes all of the text in that TextBox.
bhs67

I do it the following way:
1. Override the OnStartup for the application. Use the following code: (VB.NET)
EventManager.RegisterClassHandler(GetType(TextBox), TextBox.GotFocusEvent, New RoutedEventHandler(AddressOf TextBox_GotFocus))
2. In the event handler use this code (again VB.NET)
Private Sub TextBox_GotFocus(ByVal sender As Object, ByVal e As RoutedEventArgs)
_theTextBox = CType(sender, TextBox)
If setFocusTimer IsNot Nothing Then
RemoveHandler setFocusTimer.Tick, AddressOf setFocusTimer_Tick
End If
setFocusTimer = New DispatcherTimer
setFocusTimer.Interval = TimeSpan.FromMilliseconds(10)
AddHandler setFocusTimer.Tick, AddressOf setFocusTimer_Tick
setFocusTimer.Start()
End Sub
Private Sub setFocusTimer_Tick(ByVal sender As Object, ByVal e As System.EventArgs)
setFocusTimer.Stop()
_theTextBox.SelectAll()
End Sub
What this does is register a handler for every textbox in your application. This will execute when the GotFocus event is raised and will allow you to do whatever (in this case select all) you want. A great way of handling things at the application
level.
Lloyd Sheen

Adobe Premiere Elements 11 - HOW DO I KEEP THE IMAGE QUALITY WHEN I RENDER?

I'm using Adobe Premiere Elements 11, on a Windows 8 PC and when I "render" still pictures, some videos and simple effects -- they lose quality and get grainy --
HOW DO I KEEP THE IMAGE QUALITY WHEN I RENDER?

Molnar are you receiving that error during the download or install process? Also which operating system are you using?

How to find out the calling point of a Badi

Hi Experts,
Say one Badi is getting called in a particular screen of a transaction.
Can anyone please guide me how to find out the calling point for that Badi.
I checked for transaction CC31 screen 2000, method IF_EX_ECM_EXIT~OMR_CHECK_01
is getting called.
But I could not find the calling point.
Please help.
Thanks,
Sonali.

Go in to the perticular method, and click on where used list.That may help.
Or get into the method in debugging, and press F7. That will take you to the calling point.

I have the new 2011 macbook pro, with lion preinstalled. I want to change the harddrive. I have backed up everything on time machine. when i put my new blank hard drive in will the lion screen startup.How do i get the lion dmg when i am already using lion

I have the new 2011 macbook pro, with lion preinstalled. I want to change the harddrive. I have backed up everything on time machine. when i put my new blank hard drive in will the lion screen startup.How do i get the lion dmg when i am already using lion

NicholasLiban -
When you use the Lion restore as described, it does a fresh install on the hard drive that you can select at the beginning of the process. This provides a complete install of the very latest version of Lion, including the recovery partition. The drive that you choose for the installation destination winds up like what you would have on a brand new computer from Apple.
- Randy

What is the shortcut to snap to the cut point in premiere pro?

what is the shortcut to snap to the cut point in premiere pro?

S.
There is also an option to set snap in the Preferences/General.

I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

How do you disabled it if running the same?

HT201365 I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

Double click home button, then swipe up on app picture (not the icon itself)

When I am connected to my home wifi, it says I am connected but the 4G icon doesn't go away. How can I make that go away when I am connected?

When I am connected to my home wifi, it says I am connected but the 4G icon doesn't go away. How can I make that go away when I am connected?

When I'm at my home, and on my Wifi, my 4G icon on my LG G2 is still present. No big deal. If the bits can flow via WiFi, that's what they'll do.
You might try (if you really MUST shut off the cellular radio):
Settings, Network Connections and More networks. Select Mobile Networks and uncheck Mobile data and data roaming.
Not sure if that will work - but give it a try.

How do I reveal the cut points when editing Adobe Connect recording?

Similar Messages

Maybe you are looking for