How do I reverse a document posted with transaction 1KE8?

I posted a few documents using transaction 1KE8 from Financial Accounting to Profit Center Accounting.  Now I realize that these documents are not needed in PCA.  I tried to use transaction 1KE8 again and select the reverse box but it just creates a reversal and another entry every time I try.  Am I missing something here or is there another way to reverse these documents?
Any help would be greatly appreciated.

HI,
If the reversal documet is creted with referance to the earlier document, then I feel, system works fine. That is the way it works with that reversal button.
If you want to manually clear the balance in PCA, you can post with 9KE0.
Vijay

Similar Messages

  • BAPI to reverse a Document posted using transaction FB50 in ECC5.0

    Hi All,
    We have a requirement to reverse the document that is posted using the transaction FB50.We found the below BAPIu2019s for this requirement:
    BAPI_ACC_DOCUMENT_REV_CHECK
    BAPI_ACC_DOCUMENT_REV_POST
    While trying to execute them, we are getting the error message u201C It cannot be postedu201D.
    Please let me know if anyone has worked on these BAPIu2019s or information on any other BAPIu2019s would be of great help.
    Regards
    Prathima

    check this link[Reversing a document using the bapi 'BAPI_ACC_DOCUMENT_REV_POST';

  • Trip Co Document posted with value type 11 - Statistical actual

    Dear all,
    Can you please share what caused the CO document posted from Travel Management (tcode: PR05) having value type = 11 Statistical Actual?
    So far all the CO documents posted from Travel Management have value type = 4 - Actual.
    However we have a CO document posted from Travel Management with value type = 11 - statistical actual.
    Question:
    1. What caused the CO document posted with value type = 11?
    2. How to fix/change the value type for this CO document from 11- Statistical to 4 - Actual?
    Thank you very much in advance for your kind assistance.
    Best rgds,
    DTan

    Normally it means that in your CO account assingment there is also another CO object with a higher priority where the real value was posted.  For example if you do account assingment to the Cost Center and Internal order the real object will be Internal order and statistical posting will be at the Cost Center.  Anyway it should be visible within CO document.
    The way to correct it is to reverse and repost, means changing the trip and transferring it again.

  • CIN: How to check the material document posted without excise invoice

    Hi Guru,
    Please advise how to check the material document posted without excise invoice.
    I have tried tcode J1I7 but it seems start to collect the excise invoice first and then material document.
    But my case is to find the material document WITHOUT excise invoice for internal tracking purpose.
    At the moment we start from tcode MB51 to get the list of material document and check in J_1IEXCHDR / J_1IEXCDTL
    Best regards,
    Pakorn

    Hi,
    Try creating a Query in Tcode SQVI by combining tables MKPF and J_1IEXCHDR/J_1IEXCDTL for your requirement.
    Check these threads how to create Query.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6018c1ae-8c44-2d10-6ea9-c3fad2c82880?QuickLink=index&…
    http://ptgmedia.pearsoncmg.com/images/9780672329029/samplechapter/0672329026_CH03.pdf
    Regards
    Binoy

  • Report on documents posted with user name-urgent

    Hi All
    Is there any report available to find out the documents posted  with user name on any one particular date.
    This req. is for a audit purpose.
    Thks & regards
    nivi

    Hi Hein
    They dont want to use any query and generate report.  There are billing issues.  They are enquiring whether standard report or transaction code is there to track the same.
    Anyway Thks for your inputs.
    Thanks & Regards
    nivi

  • How can I reverse the acction create with F110

    When I use F110 for Automatic Payment Transaction,how can I reverse the document  if it nessesary?

    If the payment is done and accounting documents are created, then you have to use FB08 for reversal(FBRA for reset)
    If the invoices are at proposal level, you can delete the proposal(EditProposal-Delete)
    Rgds
    Murali. N

  • How would I do a http post with a xml file

    How would I do a http post with a xml file.
    I have a url called https://localhost:8443/wss/WSS and the XML file is sent as part of the HTTP POST body.
    How would I send this XML file when posting?

    most people just add feedback to the comments they've asked about already, rather than ignoring all the feedback and making a new post with the exact same information:
    http://forum.java.sun.com/thread.jspa?threadID=5247331&messageID=10020973#10020973
    If you want to add in an XML file to a POST command, you'd add it just like any other file you'd attach to a post request, especially (if you're request is the same as your last post) if you're just doing a jsp page. I'd do it something like this:
    <form method=POST ENCTYPE="multipart/form-data" action="https://rcpdm.mnb.gd-ais.com/Windchill/servlet/IE/tasks/DJK/fcsAddContentComplete.xml">
    <H3> File Name </H3>
    <input type=file name=filename>
    <input type=submit value="Do it!">
    </form>Then again, this solution has literally nothing to do with java, and you still need to make sure that your servlet knows what to actually do with that information you're sending it.

  • Posting with transaction type 160 is not possible at MR8M

    MODERATOR:  Do not post (or request) email address or links to copyrighted or confidential information on these forums.  If you do, the thread will be LOCKED and all points UNASSIGNED.  If you have some information, please consider posting it to the [Wiki|https://wiki.sdn.sap.com/wiki/display/ERPFI/Home] rather than sharing via email.  Thank you for your assistance.
    Hi All,
    We raised  a PO w.r.t CWIP asset and posted GRN (MIGO - Transaction typr:100) and Invoice (MIRO).
    Here, Invoice posted wrongly, So we are trying to reverse the invoice with MR8M (which is posted thru MIRO).
    But system populating one message as per the following:
    Posting with transaction type 160 is not possible here, see long text
    Message no. AAPO 177
    Diagnosis:
    Transaction type 160 has a depreciation limitation, although posting is not mandatory in all of the depreciation areas entered However, it is not possible to select depreciation areas in the current transactions.
    Procedure:
    Check the specification of transaction type 160 or use transaction MR8M to enter the transaction
    Please help
    Sairavi
    kumarfi9gmailcom

    Welcome to the forum.
    As a newbie you should understand the forum rules where you are not suppose to post any basic or repeated question.  To avoid this, you should make a search here
    [Forum Search|http://forums.sdn.sap.com/search!default.jspa?objID=f327]
    Type the same error text in Search Terms so that you will find the solution.
    thanks
    G. Lakshmipathi

  • Cannot clear document posted with FBS1 and Reversed with F.81 in F-03

    We have recently turned on OIM for a Balance Sheet account and are in the process of clearing it.  The postings in this account were generated with FBS1 (Accrual/Deferral Document) and reversed with F.81.
    Majority of the documents displayed with FBL3N cleared no problem after open item management was turned on, however, there are a handful that are not displayed in F-03 (or F.13).
    Please consider the following when answering:
    OIM was turned on for the account using ZRFSEPA02 (Copy of the standard/not-delivered program for turning on OIM).
    All of the entries were reversed with F.81 and the header of the documents does not contain a "Reversal Date".
    I have already tried turning off OIM with ZRFSEPA03 and then turning it back on again with ZRFSEPA02.
    My settings in FS00 are correct for the GL Account.
    Hundreds of items were cleared.  There are 7 documents that don't appear in F-03 or F.13
    Also, please do not give me "Beginner level" information such as "Tick the OIM box for the GL Account in FS00" (You cannot turn on OIM in that manner for an account that has line items posted to it - I have been doing R/3 Configuration for 23 years, so I am an advanced Analyst in the FI/CO Area).
    Thanks - Back to searching OSS!

    Hi,
    Actually when report is executed we get following message
    Do not use the report program to set up open item management for the
    account.
    Create a new account with the correct account assignment. Post your
    items to the new account. If you want to use the original account
    number, you must bring the account balance to zero, change the account
    assignment, and repost the items. You can remove the old items by
    archiving the documents.
    Hence, it is risky to execute this report.
    Are you getting these documents in FB03 ?
    Regards,
    Tejas

  • Reverse Document Post with ABF1

    Hello
    I have used the transaction ABF1 to post documents with reconciliation AA account.
    Know i need to reverse some documents that are not ok.
    Does anyone know if exist any transaction to do that?
    Thanks and Regards
    Joao Simoes

    Hi,
    you can not reverse an ABF1 document. You have to create an inversal posting. You can do this within ABF1 frmo the menu (create inverse posting with relation to original document).
    Regards,
    Markus

  • Mass reversal of documents posted using F.13

    Hi Friends,
    We have some GR/IR open items as on 28.02.2010, and we ran the F.13 program to clear those line items with clearing date 03.03.2010. Since all those documents cleared on 03.03.2010. In total there were 1000+ documents posted by the program.
    But unfortunately user has not entered the posting date range in F.13 selection screen as 01.03.2010 to 03.03.2010. Because of this, documents related to FEB period also cleared in march and if we run the FBL3N with open item key date 28.02.2010, all items are showing open items. which is correct from the system perspective.
    But we need clear, those documents posted prior to 01.03.2010, with clearing date 28.02.2010 only.
    In FB08, mass reversal option, we can reverse multiple documents, only in case of open items, but not the cleared items.
    My requirement is that, is there any program / way to reverse the cleared items, posted by using F.13.
    We cannot use FBRA, since we have 1000+ docs.
    Please advise.
    Thanks,
    Srinu

    Hi Joshi,
    Thanks for your prompt reply.
    I have acheived my target, using LSMW batch input recording method with tcode FBRA to reset the cleared items.
    After that, i went to F.80 and given the doc number series and did the mass reversal.
    Again i did F.13, given end posting date as 28.02.2010, and clearing date 28.02.2010 and executed.
    This resolved my issue.
    Thanks,
    Srinu

  • Reverse CO document post from CAT7

    Hi all,
    How to do a reversal for CO document which post from CAT7 (time sheet)?
    Thanks

    If I reverse the document through KB24N, it will prompt error message:-
    "You want to reverse a CO document which has an external reference. You cannot reverse the external document within the Controlling component. The reversal must run via the external document number."
    I can change it to warning message, but is there a better way to do this? Can we reverse via the external document dumber?
    Can this function BAPI_ACC_ACT_POSTINGS_REVERSE workable? How to execute it?
    Thanks.

  • Accounting Document Post with Ledger Group

    Hi,
    I am trying you post accounting document using 'BAPI_ACC_DOCUMENT_POST', But my requirement is to post the acc documents with 'Ledger Group', I couldn't find any parameter in the  above mentioned BAPI. If anyone come accross same requirement please share your knowledge and suggest me how to proceed with this.
    Before posting this thread I searched for the threads with same category, but i couldn't find sufficient information.
    Regards,
    Narayan

    Hi Navitha,
    I am doing migration as It's a one time activity, If I implement BADI  it will be triggered whenever accounting document posting happens, Is there any other way to pass Ledger group like other BAPI / FM etc ?
    Regards,
    Narayan
    Edited by: narayanasamy rajagopal on Sep 30, 2009 11:08 AM

  • How to make a PDF document open with bookmarks showing

    I have created a big PDF document that I will be making available to multiple users via Dropbox.  How do I (can I) make the document open with the bookmarks showing?
    Using Acrobat 10.1.10
    Thanks, Dan

    Go to File - Properties - Initial View and under Navigation Tab select "Bookmarks Panel and Page".

  • Revesal of document posted with movement type 654

    I have created one outbound delivery using tcode VL01NO (Create outbound del without order reference). In PGI material qty was issued using movement type 654. Now, I need to reverse this document i.e. reversal of movement type 654, but system is not allowing the same.
    Pl help on this
    regards,

    movement 654 is already the reversal to movement 653.
    A reversal movement type does not have a reversal movement type.
    you may need to create a new schedule line category in VOV6 to create a new outbound del without order reference with a 653 as movement

Maybe you are looking for