How do i reverse a download? the little center is turning & it says "loading, please wait". it's been doing this for several hours & I don't know how to stop it.
I was downloading add ons; i let it wait until i left the site to load, but it's been running & showing the center spinning & "loading, please wait; it's been doing this for several hours & i don't know to stop or disable it
There is a rectangular white box between the top & bottom of the screen with no buttons on it. The wheel turns with 'loading, please wait'. There is a little arrow on the upper left with 2 green & gold 'men'. When I click on it this message shows up on the screen "Please accept the Terms of Service first (Add a social network). The only way I can get the wheel to quit turning is to go to 'tools' & click on options & it stops turnning. I already had a yahoo, facebook & twitter accounts, so I don't know what to do.
I've checked in my Control Panel & there is nothing with Firefox in there. If I can't resolve this can someone tell me to how to unload all of this & start over.
Thanks.
Similar Messages
-
How do you transfer the content from an iPhone to a PC? I have to use a PC for a while and don't know how to put my stuff on to there from my phone
If you're talking about music and movies an i-device was not designed for unique storage of media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing music and movies is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred from a device to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991 -
i am trying to download ios 7 but it keeps on say estimating time and it has been doing this for over a hour what do i do?
Click here. This version can't sync any device running iOS 7.
(90145) -
my ipod wont turn on. the white apple with the bite appears, stays for about 10 to 15 seconds like it normally does for booting up, then fades away and the screen goes black. 5 seconds later it repeats. it has been doing this for hours now. I tried the home and power button thing and the screen went black. then i hit the power button and it continued to do the same thing. i tried plugging it in to my wall, my charger recognised that it was charging. i tried plugging it into my computer and it made a sound like something was plugged in. but nothing came up.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I recently thought I was updating my Safari browser. When completed, I put all those little files that were on the desktop into the trash. Now my trash is saying it can't be emptied because there are locked files and I don't know how to unlock them or get them out of my trash and they keep multiplying. And to make matters worse, I tried renaming them as pdf files thinking that might do the trick.
oh boy ! I'd ask you if you knew what kind of files they were or where they came from, but I don't think you could help me a bunch. Try going to the Utilities folder and running Disk Utilities. If you want to empty the Trash and it won't empty, go to the finder and choose "secure Empty trash". Worse case scenario-you may have to reinstall Snow Leopard, but I don't know what else to suggest. If you have a DVD of Snow Leopard, boot up from that, and reinstall the OS. This will not touch the stuff you have on your Hard Drive, then you can update from 10.6 to 10.6.8, otherwise Onyx? Maybe those files are part of the OS which needs them to keep running. if you hold down the Shift key on reboot, you can reboot in Safe mode and maybe you can take the files out of the trash that way
good luck
John B -
I've downloaded the free pixel bender plugin for my mac (it says toolkit) for cs5 but I don't know how to put it in my filter list, can someone walk me thru it please?
Copy it in the respective plug-in folder.
Mylenium -
I want to make a bootable usb drive for my macbook air,and my system is osx mountain lion 10.8.5. How can i download it again without repaying for it so i can make my bootable flashdrive? I'm pretty new at this computer stuff so i don't know how things work.
Message was edited by: tzaphonThis is not difficult and you will not have to download from the app store.
your computer has what is called a recovery partition that came with it.
simply hold cmd+R while you boot up. let go a second after you hear the chime.
you will boot into the recovery partition.
Use disk utlity to format your usb drive and then exit Disk utlity and go to Reinstall Mountain Lion.
it will ask you which disk you want to install ML onto. Choose your new USB drive.
easy peasy -
I was downloading the software update for ipod touch 2gen and after it was done downloading it showed that there was an error with my ipod and when i saw it was on the lockscreen loading. its been like this for 4 hours already
What did the error message say?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
It has been doing this for a week and the music is faint while the static is louder than it. I try plugging it in to my iTunes and when I un-plug it, it still makes the loud static noise. I have also tried tapping my knuckle on the back of my ipod nano. This has not damaged it at all nor caused this to my ipod. There is no water damage to the ipod. Only a few scratches from a couple drops. The drops have been on concrete but not at a very high distance. How to I stop this? Do I need to replace my ipod instead?
Have you tried a different pair of earbuds/headphones to rule out a pair of damaged/faulty ones? You might also want to make sure the headphones are securely and firmly seated in Nano's headphone jack. Lastly, check the headphone jack for any signs of debris or damage. You may need to have the headphone jack replaced either by Apple or a third party repair company.
I assume this static is present on any track you listen to versus only particular ones?
B-rock -
I keep getting the message "The application could not be downloaded. The installation could not be started." with a "Retry" and "Cancel" button, I have been re-trying for several hours to no avail. What is the problem?
You'll need to contact support and have them check your account
https://expresslane.apple.com/GetproductgroupList.action -
i have the new iMac with OS X 10.8.3 i want to conner it with apple remote control i don't know how
I have a Mac Book Pro 2008
I have my MBP paired with Apple TV and use it all the time
My only complaint is that when I use the Apple TV remote it sometimes turns things off and on in iTunes.
Besides all the options from Apple TV I can listen to anything on my mac over my TV surround system thru Apple TV -
I joined this community in error and don't know how to delete myself from the group. Can someone please tell me how to do that ?
Thanks,
Skeebo -
I am trying to convert PDF to Word with Adobe Export PDF on my PC. I get the message " error occurred while trying to access service". Has worked fine in past. Has been doing this for a few days now on all files i try to convert. Any ideas?? Thanks
Hi bert090909,
Are you trying to convert your files from within Adobe Reader? If so, please make sure that you have the most current version by choosing Help > Check for Updates. Earlier versions of Reader could cause the specific error that you're reporting.
Please let us know how it goes.
Best,
Sara -
when ever i click a picture in photo booth it does not automatically update its content is this a bug or i don't know how to do it?
whenever you click a picture in photobooth you have to manually insert it one by one in iphoto
i want to know is there any other option in iphoto which can do this type of thing(adding pictures automatically to iphoto )
so that i do not have to do it manuallyOnce you take the photo with Photo Booth, select the photo in the tray at the bottom and click on the iPhoto button just abouve and to the left:
Click to view full size
That will import the photo into iPhoto automatically. But PB does not import any and all photo taken into iPhoto automatically. That choice is left to the user.
OT -
I tried updating my ipod touch to iOS6 then an unknown error occured so i disconnected it an now it is stuck on the apple sign and has a loading sign and has been like this for 2 hours. what can i do?
My home button is also unresponsive and i have to press it really hard to make it work.Do you remember the the exact wording of the error message:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Maybe you are looking for
-
Hi, I am new For SRM MDM Regarding SRM MDM< installation i need some help 1) Is SRM MDM is inbuilt in the SRM 7.0 or we need to install seperately 2) In the installation manual it is given that we need to install SAP netviewer JAVA AS is this SRM JAV
-
Slimbox not working with Spry Dataset
Hi there, I'm trying to populate a page with Spry Dataset and use Slimbox2 to show a set of 4 images when a thumbnail is clicked. The original webpage WITHOUT Spry Dataset is here: http://shadowmuseum.com/portfolio/p-web.html Currently it works with
-
Retro issue Infotype 14 wagetypes
Hi Experts, Changes in Infotype 0008 wagetype is working fine and is appearing in /551 . Similar thing is not happening for IT0014 wagetypes. I've changed them from past date but the /551 doesn't get affected. Already checked the retro settings in ta
-
Is it possible to reset a layer's bounding box to exclude alpha?
I searched the forum before asking.... I'm not even sure how to ask this properly... I have imported several layers from a photoshop file. Many of the layers are in groups to give me some pre-comp options in AE. On import, I did NOT choose to retain
-
Using Captivate 5, I need to create a project that captures Full Screen. Everything on the monitor needs to be part of the capture. My monitor is set to display at 1024 x 768. Captivate is set to 1024 x 768 Full Screen. When capturing the slides, I a