How do I revert a spread for print to its original state?

I have a brochure that was designed in default form (page 1 as front page/1st line, pages 2-3 on second line of pages tab, etc.). This brochure was then converted to a spread for print so the appropriate pages would line up, and was then saved as layout (not as the original layout). Is there a way to get my original layout back? I would like to export as a pdf in a single page format (opposed to two pages on the same page) Is this possible? Please help!:)

Is it still single pages, just arranged for the printer, or do you now have both sides of the spread on single pages twice as wide?
If you've still got individual pages you can try just dragging them around in the pages palette, but that's going to be hard to keep track of In CS2 because the page icons don't yet show the content thumbnails. It would be easier, I think to create a new document the same size and drag pages from the pages palette of the first document into the document window (not the palette) of the new doc. You can drag them in the correct order and they should be added to the end each time, then delete the original page 1 which should be blank. Import any styles from the original document to be sure the text doesn't change (from the Paragraph or Character styles palette menu choose "load styles").
If you don't have inidvidual pages, make a new document with the correct page size and number of pages, then copy elements from one document and paste into the other. Load styles as above.
Peter

Similar Messages

How to revert VMWare RAC OBE toolkit to its original state?

I have installed the Oracle By Example VMWare RAC toolkit and I have done a few of the tutorials. But now I think I have made a mess of it, so I want to revert my virtual machine to its original state, just as it was when I had just installed it. How can I do it? I took several snapshots as I went along with the tutorials, but none of them is good for me.
I hope I do not have to install the whole environment again.
Any help would be appreciated.

Well if you didn't take a snapshot of original state then you can only delete all .vmdk files and extract original one again ...

HT5639 At present I have Windows programs installed using parallels 7. I now wish to delete all Windows based programs and revert the hard drive back to its original state ie single partition. How do I go about it??

At present I have windows based programs installed using parallels 7 on my Imac. I now wish to delete all the Windows programs etc and revert the Hard Drive to its original setting i.e single partition. How do I go about it??

It's not clear if you installed Windows in a virtual machine or you installed Windows in Boot Camp but you run it in Parallels.
If you installed Windows in Boot Camp, open "Boot Camp Assistant" (it's in /Applications/Utilities) and follow the steps to restore your hard disk into one volume. If you installed Windows on a virtual machine, just open Parallels and delete the virtual machine where you have installed Windows

Seperating 2-page spreads for printing?

I recently have had trouble with printing my booklets.
I am using 11x17 documents and wish to seperate 2 page spreads for printing?
When i currently print it prints the cover page, page 1, seperate but combines the other spreads, with 2 pages per actual printed page.
I seperate the files one by one for printing currently but i want t0 know if i have to do that, because it wastes valuable time.
Is it a problem with the way i am exporting the file?
Please give me your advice as I am open to other ideas to reaching my main goal.

When you see two pages side-by-side in an InDesign file which is set up with facing pages, that's just how it looks on the screen. If none of the items on your pages span across both pages of a spread, you can output a multi-page PDF, and each page will be independent. In fact, you could have something that crosses the spine on a spread and still output to single pages, but that's not really the point. The double-page part they are talking about is the ability for you to output (for example) pages 2 and 3, which are side-by-side, as a single page that is twice as wide as a normal single page. They also don't want 32 different one-page PDFs for a 32-page book. Neither of these will be a problem if you export your PDF normally. If you see facing pages in the actual PDF, that may be (probably is) just a viewing option. All of the pages will be singles.
The point I want to make is that you don't have to override the facing pages to make a multi-page PDF.

My computer has reverted back to its original state!! Help!!!

I was using my computer and went to log into ichat, it acted like I had never logged into the program before, asking me to enter my screen name and password. I then went to go into mail and it did the same thing asking for my email address and outgoing mail servers. I decided to shut down my computer and when I logged back on, the my background image disapeared and the dock had reverted back to its original state. All my other programs do not recognize my previous preferences and my keychain is nowhere to be found in my applications menu. My documents and saved pictures, along with my itunes music is still intact, but the rest of my computer is reverted.
Is there any way to fix this and get my computer back to my personal settings? How do I get my keychain back?
I really need help!!

Hello linty242,
First of all, Welcome to Apple Discussions Forums!
Did you happen to rename your Home Folder? If so have alook at Dr. Smoke's (of the X-Lab) FAQ found at:
http://www.thexlab.com/faqs/renamehomerecovery.html
Read and fully understand the advice found there before proceeding.
If this is not the problem post back here,
littleshoulders [:-)

How do I restore my 2011 MacBook Air to its original settings?

How do I restore my 2011 MacBook Air to its original settings for resale? When I do the cmd R and go through the process, it begins the restore process for Mountain Lion because I upgraded to Mountain Liion on this machine a few months ago. And it's asking for my Apple ID. If I do that upgrade, the buyer will have a version of Mountain Lion that is associated with my Apple ID and that won't work. Also, isn't there licensing issues in such a case? I want to restore the MacBook Air to its original factory settings when I purchased it in April of 2011. At that time it was Lion and not Mountian Lion. And I don't want any software on this computer to be associated with my Apple ID.
Thanks for all your help.
Ron

Press Command, Option and R keys on boot, open Disk Utility, erase your disk and reinstall Lion

HT4623 how do i reset a jailbroken i phone to its original settings ?

how do i reset a jailbroken i phone to its original settings ?

Use DFU mode. Google is your friend here for instructions.
Good luck.

Is factory reset for Windows 7 gonna restore my BIOS too to its original state when I bought it?

I am using Windows 8 now, I bought my laptop in JULY 2012. It came with Windows Home Premium and I have the recovery disks for Windows 7. I plan to factory reset my laptop because of my disappointment with Windows 8 and supprt for Windows 8.
I want to know that if the 'Factory Reset' will restore the laptop BIOS to its original state. I mean I have my BIOS updated to the latest. I want it to go back to its old state. Also how long does the Factory Reset takes? I own HP DV6T 7000 Quad edition with 32gb mSSD.
Intel RST doesn't work no matter what, my HDD is shown in non-RAID and there is no way I can change it to RAID. So my last option is to try the Factory Reset and see if it helps. I am pretty sure IRST will work only if my BIOS is restored to the original state along with everything so it starts detecting my HDD in RAID.
This question was solved.
View Solution.

Hi,
A factory image recovery will not affect the BIOS version or its current settings. The amount of time that the factory image recovery takes wil depend on which type of recovery media you have. If you have usb recovery media than it will probably take perhaps thiry minutes. It you use a recovery disk set then the recovery could take a few hours to complete.
Once you start the recovery do not touch the keyboard.
Make sure that the wireless is turned on before you commit to the recovery.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

My iphone was restored to its original state and I lost all of my contacts and applications... any ideas how I can get it back??

My iphone was restored to its original state and I lost all of my contacts and applications... any ideas how I can get it back??

Why did you restore without transferring your music to your computer?
If you are in the U.S., then you can use the newly released beta version of the cloud to get your music.

How to create seperate color channel for print of illustrator document

Hi,
I need to print a document with partial UV-spots, and cannot figure out how to make my Illustrator document ready for print!
The online print center guides me to:
create a 'seperate print channel' for the specific elements in my document i want covered, with either a '5th color or a special color' set for 'over-print and 100% color'.
Can anyone help?
Thank you!

Draw the spots you want to use and fill them with a spot color.

How do I get Software Upgrade for Printer that support MAC OS Lion

I have a new MacBook Air and a Brand New ENVY100 eAll In ONe Printer and the software provided does not support LION OS.
How can I upgrade the software for the printer?

If you mean upgrade the HP software for your Mac, get it here: http://support.apple.com/kb/DL907
If you mean firmware for your printer, enable Web Services then go to Setup > Preferences > Update Product.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How can I size an envelope for printing

how do I get the correct size for printing envelopes. I can't seem to get a 3 5/8 x 6 1/2 size to come up?

If you are using Pages there are templates with envelopes included. Otherwise you can choose from the file menu Page Setup. Under the Paper Size dropdown, you can choose Manage Custom Sizes... and manually enter the dimensions of the envelope you want to print to.

How to set the default values for print options

Hi all,
We can set the default value for print options, just like Logical destination、numbers of messages、print immediately and so on, so where we should to maintain these default?

Hi Sandy,
This can be done by an abaper by making changes in the driver program. The Driver program feeds all the data which u have mentioned for printing.
if the driver program is standard. copy to an z type and make modification on printer settings on the driver program code.
this will surely solve the issue.
Regards
Gunaseelan

How to use bind variable value for table name in select statement.

Hi everyone,
I am having tough time to use value of bind variable for table name in select statement. I tried &p37_table_name. ,
:p37_table_name or v('p37_table_name) but none worked.
Following is the sql for interactive report:
select * from v('p37_table_name') where key_loc = :P37_KEY_LOC and
to_char(inspection_dte,'mm/dd/yyyy') = :P37_INSP_DT AND :p37_column_name is not null ;
I am setting value of p37_table_name in previous page which is atm_state_day_insp.
Following is error msg:
"Query cannot be parsed, please check the syntax of your query. (ORA-00933: SQL command not properly ended) "
Any help would be higly appreciated.
Raj

Interestingly enough I always had the same impression that you had to use a function to do this but found out from someone else that all you need to do is change the radio button from Use Query-Specific Column Names and Validate Query to Use Generic Column Names (parse query at runtime only). Apex will substitute your bind variable for you at run-time (something you can't normally do in pl/sql without using dynamic sql)

Can not check availability for component since its execution state is unknown.

getting secondary server component status showing stopped in thread state .. Can not check availability for component SMS_INBOX_MANAGER since its execution state is unknown. not only one component. Only services component showing started rest of them
showing stopped. Previously this server worked fine. IIS works fine, certificate good. package receiving. C:\Windows\SysWOW64\CCM\ServiceData\Messaging\EndpointQueues\StatusReceiver location containing much files more than 5 gb. added primary server in
local admin group. can any one help me

Yes, I know this is an old post, but I’m trying to clean them up.
This could be a number of things, did you start with the obvious things like reboot the server? Review log files: like smsexec.log?
Are you running McAfee on the server?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

How do I revert a spread for print to its original state?

Similar Messages

Maybe you are looking for