How do I revert to CS6 after trying the extended version and not buying.

I tried the CS6 extended version and decided not to buy it.  Now I cannot open my own registered CS6 software.  Clicking on the CS6 icon brings up the expired trial dialog box and unless I buy, it closes the software.  CS6 extended is not listed as a program that can be uninstalled.  Seems as though I've been hijacked!  I tried to find the answer by using the chat contact resource but they told me I needed to try the forums. 

Does it show as activated under Help?
The only difference between Extended and Non-Extended is a serial number.  The actual software is the same.  I'd suggest simply reinstalling, but I'm guessing that you did not deactivate your original CS6 before switching the Extended Trial?
It might be that you will need to contact Customer support, and explain what has happened, and ask them to reset your Activations.  Wait a bit though, in case a better idea comes along.

Similar Messages

  • What do I do when I go to download the new version after deleting the old version and it keeps telling me to restart my computer but when I do it still won't install the new version?

    My son installed a toolbar and I uninstalled it but it didn't disappear. A friend told me if I uninstall firefox and re install it, that the toolbar would be gone. I uninstalled firefox and went to reinstall it and it told me I had to restart to get rid of the old version completely, I restarted my computer and tried to install it again and it keeps coming up with the "you must restart your computer" thing. I have restarted my computer at least 20 times and it keeps happening and I cannot install firefox and its making me mad cause I hate using IE but if I can't figure it out I am going to be forced to use it instead of Firefox :(

    If the toolbar installed something into the rest of the system, you will see an entry in the Control Panel in the software uninstall applet which should be removed. You might need to make a new profile if you cannot find an extension that has something to do with the toolbar.
    http://kb.mozillazine.org/Uninstalling_toolbars

  • How can I align a text object by the visible text and NOT by its bounding box?

    Illustrator CS4.
    I am trying to align some text to the center of the artboard. The bounding box is bigger than the text, so when I try to align it to the artboard it doesn't actually center align the artwork as I need it to. The text is needing to be aligned with another text object, so I can't just center align the text and then align to the artboard (which would eliminate the bounding box problem, I think). To make matters worse, the text I want to align has a stroke.
    The only way I know to currently align the text properly is to convert it to outlines. This is what I've done, but I need something better. I want to be able to have my illustrator file that has all editable text and then be able to make a separate identical file with all text converted to outlined paths. The only thing holding me back right now is that I can't get the exact alignment while everything is still as text.

    The solution is to simple to believe and probably why you over looked it.
    You make two text frames to exactly the height and width of the text. You position the text in the relative location and then group the text frames  then center that group on the artboard.
    Like such:
    If you ever want to add text that should be no problem but you have to re center.

  • On iCloud pages how can you put a header on only the first page and not the second page?

    I'm trying the do a visual report and every time I put a header on the first page it goes to the next page and if I try to delete it on the second page it deletes on the first page too.

    bump

  • How to open a Numbers doc after message "The document (name) could not be opened." is received?

    I opened an Excel file with multiple worksheets by doubleclicking on it, saved it as a Numbers file and made lots of changes to it. Now I can't open it at all. All I get is the message "The document (name) could not be opened."
    Any ideas?

    It seems that your doc is corrupted.
    Try to rename it from ********.numbers to ********.numbers.zip
    then double click it
    You will get a new ********.numbers file with the structure 'package'.
    Try to open it by double-click.
    Sometimes it works.
    Yvan KOENIG (VALLAURIS, France) jeudi 22 décembre 2011 13:16:28
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • Purchasing Extension Builder 2.1 After Trying the Trial Version: Must I Re-Install?

    A few months ago, I installed the trial version of Extension Builder 2.1. The trial has expired.
    So i went to buy a license. I got back a serial number.
    I assumed that the Extension Builder would include some activiation dialog in which I would enter the serial number and continue on my merry way. Couldn't find it.
    From the wording on the site, it would appear that I need to re-download and re-install Extensino Builder 2.1. That take a long time and I've esperienced probelms installing it in the past.
    Is there a way to enter the serial number instead of reinstalling?
    TIA,
    mlavie

    No. They are different builds.

  • HT1923 I can´t reinstall itunes. I updated and after downloading the latest version and installing it the error message: "apple aplication support was not found. it is required to run itunes. uninstall and install again. Error 2

    I bought an iphone 4s. After plugging it via usb to my computer itunes demanded to update version to 10.3 or higher. I uninstalled itunes, downloaded latest version (11.0.2) and during installation process on "activating services" it shows error message: "installation failed, verify administrator priviliges" which i have because i sign in as my pc administrator. I click on ignore and it tells me itunes has been succesfully instaled but when i try to run it it shows the error message: "apple application support was not found. It is required to run itunes. Uninstall and install itunes again. (which i have done several times) error 2 (windows error 2)." Someone please help me with this problem. Thanks.

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • How do I use my I'd for the app store and not my wife.

    IT always ask for my wife password and I need it to ask for my password. So I need to change it so it will show my ID and not hers.

    Tap on the id in Settings > Store and log out of it and you can then log in with your account. But any apps (and other content) that were downloaded by your wife's account will remain tied to her account, so only her account will be able to download updates to her apps

  • How to make a group name appear as the group name and not "Undisclosed Reci

    About Group Names:
    I made a group of about 15 people. I named that group “BASEBALLERS." I have another group that I labeled ”BASKETBALLERS." When I want to send info that pertains to both, I type out each group name and they both appear in the “To:” field with those names I created.
    However, when I receive copies of this email, the group names BASEBALLERS and BASKETBALLERS gets changed to boring old ”Undisclosed Recipients.“
    Is it possible for everyone to receive my emails and see the two group names instead of ”Undisclosed recipients“?
    Thank you. According to the Help Menu in Mail, it should be possible. Or does it have to do with individual ISPs?
    -Lorna in Southern California
    http://web.mac.com/lorna6

    Hi DazFaz,
    true, but with an array with length of 1 rounding down
    prevents an index
    out of range error.
    In you original code you 'round down' by multiplying by the
    length of
    the array -1 while I round down with Math.floor (and multiply
    by the
    actual length of the array).
    Is there a difference in result?
    The code below can yield 1 while the array may just be 1 item
    long:
    var arrayLength:Number = 1;
    var rnd:Number = Math.random() * arrayLength;
    var rndV1 = Math.floor(rnd);// Rounds ONLY down to the
    nearest integer
    var rndV2 = Math.round(rnd);// rounds up OR down to the
    nearest integer
    trace(rnd + "\t" + rndV1 + "\t" + rndV2);
    so either decrement the length or floor the number. Same
    difference (No?)
    I love puzzels :)
    DazFaz wrote:
    > Hi Manno Bult.
    >
    > The problem with user Math.floor is that it only moves
    in one direction and
    > that is down to an integer.
    > With Math.round ir rounds off the number to the nearest
    integer.
    >
    > If you run the code I have modified from yours, you will
    see what I mean. You
    > will notice that rndV1 always stays at 0 yet rndV2 will
    deviate from 0 to 1.
    > Making it a more accurate way of finding a true random
    number.
    >
    > var rnd:Number = Math.random();
    > var rndV1 = Math.floor(rnd);// Rounds ONLY down to the
    nearest integer
    > var rndV2 = Math.round(rnd);// rounds up OR down to the
    nearest integer
    >
    > trace(rnd + "\t" + rndV1 + "\t" + rndV2);
    >
    Manno Bult
    [email protected]

  • How to force BI Server to pick from the Agg table and not the Fact table?

    Hi All,
    I have 3 tables as the Sources in the Key measures. 2 are fact tables and the other one is the agg table.
    E.g.
    Fact 1 at A,B,C,D and E level
    Fact 2 at A,B,C level
    Agg at A,B,C level which contains the measures from the Fact1 and Fact2
    So when I select the measures from the Agg which are coming from Fact1 the Agg table get fired and when I select measures from Agg which are coming from Fact2, the Fact2 table gets fired in the SQL Query.
    Now my question here is there anyway to tell BI Server that when I select Fact2 measures fire the Agg table and not the Fact2 table. The reason being the Agg and Fact2 tables are at the same level.
    But I need to keep the Agg table as it is one level higher than the Fact1 tables.
    Any pointers would be helpful.

    hi,
    you explain us your situation really good.but you forgot to tell us the most import,the measures in aggregate table and the aggregated dimensions.
    meaning,you have 7 measures aggregated in some levels of your dimensions tables?if yes,there is no possibility Bi goes anywhere else..(by choosing only these measures and the defined levels at your dimensions..)
    One more thing,if you choose a combination of your 2 fact data sources,bi goes?where???
    hope i helped...
    http://greekoraclebi.blogspot.com/

  • After dwnloading the beta version and I log into Smartzone a window says that This Page Is Not Redirecting Properly Firefox has detected that the server is redirecting the request for this address in a way that will never complete.

    I have a Dell Inspiron, am using Windows 7.
    This does not happen with my Gmail account
    It does happen with Internet Explorer

    The problem continues.
    If I open a New Window, the usual comcast.net screen appears and shows that I AM signed into SmartZone. That's fine but I do not want to have to go through this every time I open Mozilla Firefox. I didn't have this problem before I downloaded the Firefox version 4 Beta. Now going back to the older version of Mozilla Firefox, it happens there too!
    Help!!!

  • I was trying to download my itunes to my iphone and did a restore by mistake.  Now all my contacts, pictures etc are gone from april to now.  How can I revert my iphone back to the way it was

    I was trying to download my itunes to my iphone and did a restore by mistake.  Now all my contacts, pictures etc are gone from april to now.  How can I revert my iphone back to the way it was

    - You do have iTunes version 11 on the computer, right. Saying the latest is not sufficient.
    - Have you tried everthing here:
    iOS: Device not recognized in iTunes for Windows
    - You should
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Your library/media will not be affected.
    - Does the iPod charge?

  • HT201210 How do I turn iphone on after trying to update software through iTunes on a computer?

    How do I turn on iphone after trying to update software through itunes on computer?

    Normally when updating while connected to your computer running iTunes the iPhone will go through the complete update process and then restart. It will vibrate when it is finished restarting.

  • Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work.

    Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work. I use windows 7. Thanks!

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • How do I sync my 3rd gen ipod touch after installing the latest version of itunes?

    How do I sync my 3rd gen ipod touch after installing the latest version of itunes?

    Correction: Thank you FoxFifth for the good information. I did find this information earlier before landing here in the support community. I have come to the end and I am uncertain about trying to reset my I-pod touch to the factory settings. I was satisfied with the older version of i-tunes. Can someone direct me how to downgrade i-tunes perhaps?

Maybe you are looking for