How do I roll back from Premiere Pro CC 2014.0.1 to 2014.0.0?

2014.0.1 destroys my ability to upload large files to YouTube which I need to be able to do. The functionality was fine before the new .01 which went online Thursday 7/25.
Tech Support advised me to uninstall then stop the re-install at 90%. All that did was cancel my re-install.
I can't believe they broke the YouTube upload as regards large files (greater than 1 hour, it seems). Someone PLEASE try to get back and answer this. I'm dead in the water on an important project. Thanks...
Jay

No, YouTube doesn't reject it BUT it complains bitterly that the file is not a streaming file and then it won't process it properly. An example is here: Ridgewood, NJ GONDOLIERS Act 1, Connelly Theater May 18, 2014 - YouTube
The video was uploaded using essentially the protocol but with the bit rate reduced to 8Mbps. 16 makes files of RIDICULOUS size (exactly DOUBLE) and contrary to the claims on the page describing the 2014.0.1 upgrade 8 Mbps is recommended unless you have an "enterprise-quality" connection.
I used the word "protocol" to identify the preset where PPro/AME purports to export, say, "YouTube 1080p". My assumption out of the box was that the engineers knew what they were doing. I now believe they didn't test thoroughly before foisting this off on an unsuspecting public.
Here's how I reached my conclusions. That GONDOLIERS (both acts) is a 2 hour 15 minute show. On July 4 I uploaded the full show to YouTube and one of the performers complained about the use of his name. We immediately pulled the video "private" and I agreed to wait a week or so and then re-upload. Note that the original uploaded fine and displays fine. The link I offered you goes to a video that I predict will never display at full resolution; at current time it is displaying at 360p although uploaded in a beautiful 1080p. I had originally uploaded the larger file at 16GB. YouTube complained that the format wasn't streaming, so I ran it through "MP4 FastStart" which usually cures that, but in this case it didn't. Further testing reveals that the MOOV Atom is going in the right place but I suspect it's not being written correctly on larger files, and that YouTube is having considerable trouble as a result. I then re-uploaded it to YouTube which complained, again, but ingested it...but it didn't create thumbnails (the black&white out-of-focus icon they display until processing is completed, was what came). After several hours (like Act 1 above) it hadn't gone above 360p. The original 8GB file created with 2014.0 I had to reset the MOOV Atom using MP4 FastStart but once I did that it worked perfectly.
An early troubleshooting test when I realized there was a problem was to take a 1 1/2 minute excerpt which processed perfectly. No demand to use a streaming format; no problem processing or displaying. The problem comes with files of significant size; 2 hours 15, 1 hour 15. 52 minutes worked okay.
This has NOT been a good weekend. As you read above I had managed to get the older versions of PPro and AME back on my machine. This causes other craziness (the YT full upload is going to take more than 15 hours; due to ANOTHER bug - I think squashed in the newer version - if the CC 2014 file has TITLES from the older CC version, it somehow interferes with processing. My fancy i7-4770K isn't breaking a sweat while this is happening. Usually I'm running at 99% CPU capacity and right now its about 18%. Normally if I see such a throttle-back I assume perhaps a cooling problem but I have none. It's just running beastly slow. I HATE having to work this way...and it doesn't help that it's on a weekend so I can't even get tech involved until Monday.

Similar Messages

How to import effect plugins from Premiere Pro CC to Premiere Pro CC 2014

Many of the Premiere Pro CC plugins I've been using since subscribing have disappeared from the effects panel in Premiere Pro CC 2014. For example, under Video Transitions/3D Motion, the only two listed are Cube Spin and Flip Over. None of the others are listed. I tried importing the Factory Presets.prfpset file from CC into CC 2014, but that didn't do anything. How can I import the effect plugins into CC 2014? Thanks.

Hi
Have a look at this thread
How to migrate my effects custom presets from Premiere Pro CC to Premiere Pro CC 2014?
It worked for me

How can I roll back from the latest update - hate it!

I can't get the quick WYSIWYG bar to show up. I want my old version back. How can I roll back?

I can't get the quick WYSIWYG bar to show up.
Not sure what that means. Can't you switch to Live View or Design View ? See screenshot.
In Creative Cloud desktop app, select Filters & Versions > Previous Version.
Nancy O.

How to use VST Plugins from Premiere Pro CS5 in Adobe Audition 3.0 ?

I have tried to use VST plugins from Premiere Pro CS5 into Adobe Audition 3.0, but could not use it.Is any method to use them ?

Unless I'm mistaken, you can't do this at all - Adobe lock all their VST effects so that they only work with the app they were intended for. Which also means, of course, that you can't use Audition VST plugins with any other software either. Since Audition isn't currently in the CS, there isn't even an exception there, I suspect.

How to send a project from Premiere Pro to be opened on another computer in FCP7?

The crux is I have this project in Premiere Pro CS5.5 which contains the original MOVs and time adjusted movs that I nested and turned into F4Vs, so it contains movs and f4vs with 1 aiff file and I need to send the work to the director(who has FCP7 and works on a Apple computer) so they can key out the green screen and grade it in FCP7. I prefer no to send 1 big file because there are lots of fast flickering cuts so would take alot of time to go through it pretty much frame for frame. So it would be eaier if they could view it as a project file in FCP7 like I can see it in Adobe Premiere Pro. I haven't done this before as you can tell but someone must of tried doing this before so how is it done?
My project settings in Pro are
Editing mode: DSLR
Timebase 25.00 frames/second
FRame size 1920 x 1080 vertical 16:9
Pixel Aspect Ratio: Square Pixels (1.0)
Display Format: 25fps Timecode
Sample Rate:48000HZ
Dispaly Format:Audio Samples
Video Previews
Preview File Format I-Frmae Only Mpeg
Codec: Mpeg I-Frame
Width 1920
Height 1080
Please help I really appreciate any advice, I've tried converting the f4vs into apple pro res but no video converter or media encoder will let me even if i imort the pro res preset.

Duplicate the project with referenced events onto the external hard drive.

How to export EVS MXF from Premiere Pro 5.5

I'm in the process of delivering a video to a production company that will be airing on CBS Sports in two days. They say they need it in EVS MXF and one of the production guys claims that the MXF formats in Encoder are not what they're looking for. He says the only product he knows of that can convert to the format is "FlipFactory" which is a paid program. I'm in the process of installing the trial version and it's giving me a hard time. I was wondering if anyone knew any workflows or solutions to export 1080p EVS MXF from Premiere. I'm running Windows Vista and the timeline is 29.97 1080p square h.264 mp4 files. Source footage was mostly shot on 5D DSLR and converted to mp4 for ease of editing. Thanks for any help you can give.
Derek

Thanks Joe and Jim. I thought it would be my path to success as well but I can't seem to get the trial version working. After installing all the side stuff, it places the shortcut to install the console on my desktop just as the instructions say. When I double-click on it though, IE will not connect to http://localhost:9000. I assume for some reason it's not connecting to the SQL server that it installed but I'm not sure how to force it. Do you have any tips or pointers on getting this part of the installation process to work? I'd contact support but they're gone until Tuesday morning. Thanks again for your help.

How do you roll back from 10.6.8? Kernel Panic, etc.

Any way to roll back to 10.6.7?
A *LOT* of my files have disappeared!

If files are disappeared, and you don't have a backup, try one of the recovery tools on my FAQ*:
http://www.macmaps.com/backup.html#RECOVER
And in the future never upgrade without a backup. The fact you are losing files suggests there is something else possibly damaged on your system. What's hard to know is whether it is software or hardware. One thing that causes files to disappear, is Spotlight's indexing not being complete. If you are backed up, try rebuilding your Spotlight index and rebooting. To rebuild the Spotlight index, drag your hard drive into the Privacy section of Apple menu -> System Preferences -> Privacy, and then select the minus sign below the privacy field to remove it. Watch the Spotlight menu every several minutes to see if the indexing note is gone. Once gone, reboot. Also if you are backed up, try repairing the directory*: http://www.macmaps.com/directoryfaq.html
Either method is often faster than recovering your data.

How can I roll back from 3.0 to 2.21 ???

Since the update to 3.0, the app NetInfo doesn't work on my Iphone (company mobile) any more. I cannot sync with the Exchange server of my company any more. I wasn't allowed to do any changes or updates. So if I tell the IT-Service I will get into serious trouble.
So please tell me how I can restore to the old firmware version (I trusted apple when I did the update, so please help me).
Thank you.
Eugenius

I get disappointed when I see problems like this. I have updated two iPhone 3G and two iPod Touch without the slightest hint of a problem and I know many more who have had no issues too.
What disappoints me is the immediate desire to return to a lesser past than to solve the problem and share the learning, nothing to do with whether X or Y was somehow falling-short.
Perhaps the NetInfo app wasn't quite so 3.0 compatible as its developers thought? I've found about 15% of the ones that I've bought fall into THAT category! I've also found that there are developers with apps that will be ONLY 3.0+ compatible, so staying at 2.2.1 (or lower) would not be an option.
Most problems CAN be solved - not least of all with Exchange by deleting the account on the iPhone and creating a new one (ideally AFTER a reset!).
If you're encountering problems with your IT then you're probably not alone, so why not have a go at finding out?
Whatever your final approach and outcome, Good Luck!

Steps to send a clip to AE to utilize Warp Stabilizer VFX then back to Premiere Pro CC

So I use Warp Stabilizer for about 200 clips per project. It's effectiveness has shaped how I shoot. It's awesome. Now there's VFX in AE...Can someone layout the steps involved in the following:
a) Taking a clip from Premiere Pro CC and sending it to After Effects CC (I'm not that versed in using AE having not used it in quite a while)
b) Then how to apply the new Warp Stabilizer VFX (I assume just go to effects>distort>WarpStabilizerVFX ???) ... (if there are tutorials on how exactly to use it, especially detailing exactly how to utilize the new feature of isolating what in the frame is to be stabilized that would be great too)
c) Then how to send it back to Premiere Pro CC. (I'm guessing I just save it and let dynamic link take care of the rest?)
I've tried right-clicking on a clip and selecting "replace with AE composition" (is that what I should do?), then applying the effect but I get a "warp stabilizer VFX analysis doesn't work with Collapse Transformations" message so I stopped. If it makes any difference, the majority of my footage is shot at 60p and then interpreted and edited at 23.976fps. Thanks!
NOTE TO STAFF: I've said it before and I'll say it again as someone who uses warp stabilizer several hundred times per week, I still think the default "method" in the settings should be "Position, Scale, Rotation" instead of Subspace Warp because it works FAR better (less wobble and less scaling about 90% of the time). Can't help myself I had to bring that up again here.

a) Select a clip in PrPro timeline, right-click and choose 'Replace With After Effects Composition'. Take care of handles if you might need them (that's rather general tip).
Warning about Collapse Transformation switch indicates that you have 'Scale to Frame Size' option enabled for your clips in PrPro timeline. If that was done intentionally, you can simply toggle the Collapse Transformation switch (small sun icon) off. If not, rather disable 'Scale to Frame Size' for your clips in PrPro timeline.
b) Quite a boring but covering almost all necessary details tutorial on basic work with Warp Stabilizer in AE CC from Adobe TV:
Some advanced techniques from Lynda.com
and Mathias Möhl:
c) When you're happy with your work in AE and going to lock it, render a digital intermediate out of AE, import it into PrPro and replace your dynamically linked composition in the timeline with that DI (see this good old thread on Dynamic Link workflow, pay attention to Todd's comments).
If you leave the 'Include Project Link' checkbox in the Output Module Settings dialog enabled while rendering your DI, you can easily get back to appropriate AE project so as to maybe tweak some settings: just select your DI in PrPro timeline, right-click and choose 'Edit Original'.
Mind the bloating issue, keep the amount of applied Warp Stabilizer instances in a single AE project reasonable.

Can't export clips or sequences to Audition from Premiere Pro cc 2014.2

I can't get audio tracks or anything to export to audition. If I right click on them the option is grayed out and if I go to the clip menu and select "edit in adobe audition" the "clip" is grayed out and if I choose sequence it opens a dialog box that will not let me click the box "open in adobe audition".
I am watching a how to video but my program will not function as shown in video.

I uninstalled Audition and reinstalled it. I read that it should be installed after premier pro cc. That restored the grayed out links. good, but now other problem.
Now the new issue is the export to premiere from Audition is greyed out.
I will try and get this make sense...
I installed premiere cs6 two days ago to get Encore for dvd burning and menus. After the uninstall/reinstall of audition just now I ran a check on the link and got stuff from premiere cc 2014 to launch into audition, but when I checked how to send it back to premiere pro cc 2014 when I went to export to premiere (and was able to check the open in Premiere box) it launched cs6, but I want it to go to my premiere cc 2014
So I uninstalled cs6 only leaving encore, now the box to send it to premiere is unable to be checked.
I tried another fresh install of audition, but the box is still unable to be checked.
I need help - been up all night and having a rough time here.

Since 3.6.16 upgrade last night, nearly every site freezes! How can I roll back?

Last evening, Firefox upgraded to 3.6.16 automatically. Since that upgrade, nearly every site fails to load completely, and Firefox freezes! News sites, Facebook, every thing I used to have access to! What is going on, and how can I roll back from this garbage upgrade?

Hmmmm, two days and several reboots later, everything now seems to be OK. In the words of Billy T James, "Api puckertif Ino..."...

HT203128 iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.

iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.
- it's all said in the title. I can't understand why the developers turn things bad ... risking loosing Apples valuable customers.
More examples needed? (check out the communities and the reviews)
- OSX: Maverick to Yosemite = not recommended (check it out > http://roaringapps.com/apps)
- iPad: older versions as iPad2 should not upgrade to iOS7/8 (it's not supporting its hardware accordingly, it's designed for the latest hardware)
- iTunes (it's possible to rollback to 10.7 - 11.4, but you need to breech OSX system security framework)
- Pages (was a real alternative for many of us, each update reduced features and created incompatibility to older work files)
The list could easily extend to ...

You can offer Apple feedback here: http://www.apple.com/feedback/
as for "
"@Apple, I want a $100 gift card for the inconvenience"
dream on.

How to transfer an unfinished project from premiere pro 2014 to premiere pro cs6

Ok I a not too savvy with my new MAC or computers in general but i used to work with Power Director excellent product on my PC. So how do you transfer an unfinished project from Premiere Pro 2014 to Premiere Pro Cs6

Um ... by basically re-doing the project ... as there's SO much added to CC since the CS6 version, the tools have changed, the available effects have changed, the underlying code has changed ... there's just so much that CC can do that can't be done in the old CS6 version.
You can try exporting an XML and importing that into CS6 ... sometimes that works better than others, it hath been stated. This is sort of like trying to put a modern engine with all the computer controlled gizmos & pollution controls & fuel injection and designed to work with a 5-speed auto transmission into a 1965 Chevelle. With the older 3-speed manual tranny. How do you do it? Rebuild everything ... both the engine & the car. Lot of work.
Neil

How to get my camera roll back from iCloud?

I restored my iPhone and now I need to get my camera roll back from iCloud..please tell me how to do that..Thank you

That's true. You can only restore complete backups.
I got my pictures back, the ugly way though. What I did:
- made an iCloud backup of my phone (only 2GB instead of the earlier 4GB, because the camera roll was empty)
- restored my last iTunes backup, this was a month old. It was made right before i upgraded to iOS5.
- My pictures were back on my iPhone so i downloaded them to my PC.
- Then I restored the iCloud backup from my phone. The one I made before I restored the iTunes backup.
The pictures where gone again, but at least I had them on my PC.
I don't trust iCloud backups anymore. The backup itself holds all your settings and remembers which apps and data you had installed. But it went wrong when it had to redownload the pictures from the cloud. It was a hard lesson learned. From now on I'll backup my pictures once in a while. I was used to what Apple promises: that everything "just works". No, it doesn't.

How can I go from Premiere Pro CS5 to After Effects CS6? (Problem)

Hi,
I am trying to send my clip from Premiere Pro CS5 to After Effects CS6, but when I right click on the clip, I can't even select the option to send it to After Effects. I can see the option to send it to After Effects, but I just cant select it. Any ideas?
Thanks,
-Billy

You can do what you want... only going the other way!
You can import a CS5 Premiere Project (in its entirety
or a selected sequence) into CS6 Ae.
In CS6 Ae:
File>Import>Adobe Premiere Pro Project...
Navigate to your CS5 Premiere project, double-click
and select 'All Sequences', or your preferred sequence.
As Jim points out, Dynamic Linking will only work
between matching versions of Pr and Ae.

How do I roll back from Premiere Pro CC 2014.0.1 to 2014.0.0?

Similar Messages

Maybe you are looking for