How do I run a CD for a French language course (Assimil) on my Apple desktop please?

How do I run a French language course (Assimil) CD on my Mac desk-top please?

Is it Mac compatible?

Similar Messages

  • How do I run a scan for viruses on a iPad

    How do I run a scan for viruses on iPad

    You don't. There are no virus scanners because there are no viruses that can affect an unmodified iPad.
    The iPad is not a virus prone Windows PC, so doesn't suffer the same daily problems that Windows does.

  • How do I run a search for all photos on my iMAc?

    How do I run a search for all photos on my iMAc?
    Looking for something like search assistant...
    actually on an Ext Hard drive.

    open a finder window by clicking on mr. smiley face and then click on ALL PHOTO's on the bottom right

  • How do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please

    how do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please. my version is 7.2.3 and my son did his drums on 4 tracks. 2 OH's 1 Kick and 1 Snare. Were confused because we cant figure out how to do parallel compression on the older logic version 7.2.3?

    I can't remember when the Aux tracks became the new buss tracks, so I'll spell this out using busses.
    The way I do it, is I assign all my drum tracks to a buss, say buss 1.
    Then, on buss 2, I assign it's INPUT to buss 1.
    So buss 1 (all the drums) are feeding into buss 2 simultaneously.
    Put a compressor on buss 2, turn the fader down all the way, then as the track is playing, bring buss 2's fader up slowly, until you hear the effect you're after.
    You could also do this using sends on the 4 drum tracks, set to feed the buss with the compressor on it.
    I hope I haven't forgotten anything particular to that version of Logic. See if this helps...

  • How can I run the report for different input values at the same time?

    Reports version: Report Builder 6.0.8.13.1
    Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
    I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
    I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
    In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like “o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
    How can I run the report at the same time for all the input values and save the time?
    Thanks in advance.
    Kishore.

    Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
    and then atleast 4 or 6 reports will run simultaneously.
    For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
    Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
    http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
    Thanks
    Subodh

  • How can we run MDBT transaction for non-valuated items only

    HI,
    We want to run the MDBT transaction for non-valuated items only...but through this transaction we can run for all items..
    How can we run only for non-valuated items???
    Regards,

    Dear Anil,
    MD02 - Material level planning ( Multilevel )
    MD01 - Plant level planning ( Multilevel )
    MDBT - Back ground MRP ( Multilevel )
    coming to ur query if all 20 materials belongs to one storage location or one MRP controller
    Then you perform MRP for that 20 materials with the above given user exit
    Also Plz refer my reply from this thread
    [Re: MD01 Replanification.]
    Regards
    Madhu

  • [GNOME 3] how can I change specific font for a specific language?

    Hello Community,
    I would like to know if its possible to specify a font according to its language...
    more specifically on CJK fonts (Chinese, Japanese, Korean)
    so far I'm able to globally install a font by
    grabbing a *.ttf (and *.otf) file and moving it to the /usr/share/fonts/(designated folder according to *.filetype)
    i dont like how the default font for the CJK languages and I would like to change it so...
    any idea how?
    THANKS IN ADVANCE ^_^

    i installed the font manually and not using pacman nor aur packages.... i downloaded an *.ttf (and *.otf) files and move them to /usr/share/fonts/TTF using nautilus...
    i couldnt figure where to configure them... i was able to configure it on firefox using about:config but the system itself... i didnt know how...
    for some reason though when i resetted my laptop... the newly installed japanese font was able to applied in the system... it's solve but i have no clue how it fixed itself...
    anyways thanks for the help @karol
    http://i.imgur.com/r2HYahC.png
    Moderator edit [ewaller] Changed img tags for over sized picture to url tags.  Consider using thumbnails https://wiki.archlinux.org/index.php/Fo … s_and_Code
    Last edited by ewaller (2014-04-20 15:11:09)

  • How do you run CalcMgrCmdLineLauncher.cmd for a ruleset that runs rules in multiple databases?

    Hi all,
    Just having recently upgraded to 11.1.2.2, I'm just trying to update our batch files to automate the running of some business rulesets using CalcMgrCmdLineLauncher.cmd. I can get business rules working ok, and rulesets that only run rules within the same database working, but I can't seem to get the rulesets running where the rules are running against multiple databases.
    I know the syntax is CalcMgrCmdLineLauncher.cmd -f:%PWD% /A:%PlanAPP% /U:%RUNUSR% /D:%EssbCapexDB% /S:%BR%
    but for the /D: argument, putting one of the databases in there doesnt work.
    The batch runs, it even says its successful in the log but its too quick and looking at the job console it didnt run.
    I can run the ruleset manually no problems.
    Anyone know how to fix this?
    Thanks

    One stated to "search cmd, right click, and run as admininstrator" but where is this?
    In the search field in your Vista start menu, type cmd
    Next, right-click on the cmd that comes up and select "Run as administrator".

  • How can i run AirPort Express for both a Mac and Windows 2000 SP2?

    I have my AirPort Express set up for my iMac and it runs fine. We have a house guest who has a laptop running Windows 2000 SP2. Can I set up Airport so that both computers can access internet wirelessly?

    Just did a quick check of the Unofficial Averatec Support Forum. Several posters there upgraded the driver for the wireless card to support WPA on the 5110.
    They used drivers from other computer manufacturers and indicated that Averatec has not provided updated drivers.
    They were running XP SP2.
    Many Averatec models have weak wifi cards. Mine included. Sorry I am unable to be of more help.
    Good luck
    susan
    iBook G4   Mac OS X (10.3.4)  

  • How can I run a check for a record across other records in the same dataset based on unique key constraint?

    Dear community,
    I have a flat data set which I run through a lookup and return. I want to check if at least one of the records matching a unique key constraint had a successful return without merging all the records. Can some one point me in the right direction?
    Thanks!
    Marc

    Hi,
    Sounds like a job for the Lookup Check processor!
    As with all check processors, it adds a flag attribute (with a Y/N value) that denotes if the lookup was successful or not, as well as filtering records based on this at output.
    Lookup Check does the same as Lookup and Return but does not return the record(s) looked up.
    Also note that Lookup and Return does not actually merge records, but it does pull back the return data (which you can then split if you want a record for each).
    Regards,
    Mike

  • How to I run a search for "History" inside Newstands?

    I don't want to search all apps, just the newstand for history mags...

    open a finder window by clicking on mr. smiley face and then click on ALL PHOTO's on the bottom right

  • How can I use Family Sharing for Store purchases if I use a different Apple ID for purchases?

    A key feature of Apple's iCloud Family Sharing is the ability to share store purchases with invited family members. However, like many people, I use a different Apple ID for iCloud and Store purchases (ironically, primarily for the exact purpose of sharing among family).
    Can I use iCloud Family Sharing to share purchases if I use a different Apple ID for Store (iTunes, App Store, etc.) purchases?

    Sorry, let me clarify. I have two Apple IDs A and B:
    A: Used for iCloud. All my calendar, mail, contacts, and other iCloud features are here. This is the ID I use as "the" iCloud on my iOS devices and OS X machines.
    B: Used only for purchases, on all my devices and machines. This is what I used to log into iTunes, or to buy apps for iOS or OS X.
    The issue is that the only way (currently) to set up Family Sharing is to invite from an iCloud ID (A, in my case) on an iOS 8 device. That's not the ID (B) I use for purchases. The question is whether there's a way to share those purchases given that I'm configured on all my devices with A for iCloud. (Clearly if I somehow send invitations from B, I can share purchases; but that's not the question.)
    It sounds like the answer to that question is 'No'.
    If that's the case, how do I invite from B? Do I have to configure an iOS device with B as the iCloud ID? My problem isn't that I want to ("willy nilly") avoid inviting form B; it's that there seems to be no way (certainly no convenient way) to do that.

  • How can I make purchases with iTune original French-language books? Having a bank account in Italy?

    Non ho niente da aggiungere: il titolo parla chiaro.
    I have nothing to add: the title speaks for itself

    Non-destructive editing is an important feature of iMovie.
    iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
    So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
    One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
    Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

  • How long does IPOD5TH 64GB video for at one time?

    How long does IPOD5TH 64GB video for at one time?

    Per:
    https://discussions.apple.com/thread/2625132?start=0&tstart=0
    13 minutes is 1 GB. You may run out of battery first.

  • I have a seven year old desktop.  how do i run a hardware assessment test

    i have a seven year old desktop.  how do i run a hardware assessment test?

    Hi johnnysteelers,
    Welcome to the Apple Support Communities!
    Please use the attached article as a resource and for information on running Apple Hardware Test.
    Using Apple Hardware Test - Apple Support
    Using Apple Hardware Test on computers with OS X v10.7 and earlier
    AHT is located on the Applications Install Disc 2 and should be included with your computer or the MacBook Air Software Reinstall Drive on a MacBook Air (Late 2010). To start AHT on these computers make sure the Applications Install Disc 2 is inserted into the built-in optical drive, external Apple Superdrive, or for the MacBook Air (Late 2010) be sure the MacBook Air Software Reinstall Drive is inserted into a USB port. Then, follow steps 1-6 outlined in the previous section of this article.
    Have a great day,
    Joe

Maybe you are looking for