How do I run a Midi Light show from within Logic Pro?

Hello,
I'm trying to figure out how to run a midi light show along side or within logic pro. I currently run .wav synth files through logic into an Onyx Satellite into the PA system, I want to run a lights show that fits perfectly with each part of the songs running on logic pro. I need tips on everything: hardware, what intelligent lights I need, how to best program and set this up.
Any help would be greatly appreciated
Message was edited by: Host <to clarify Subject>

Hi
I use the NSI MC1616 midi controller. with it you can control 16 separate banks of lights and store 16 scenes. the unit uses midi program change messages for each scene and CC #1 info for fade rate. Since the MC1616 sends the program info midi out, I use it to send the commands to logic in real time, playing along with the song, pressing the scene buttons, to program the lighting cues.
Hope this helps
Don

Similar Messages

How do you access T-Racks EQ plug-in in Logic Pro 9?

I just installed the T-Racks EQ plug-in I got for free for attending a music seminar and I can't figure out how to access the insert from within Logic Pro 9. I have several other third-party plug-ins/inserts installed and have had no problem finding/accessing them within Logic.
I feel stupid for asking, but does anyone know how to access the T-Tacks EQ insert from within Logic Pro? Thanks.

Thanks for the suggestions Eriksimon. I checked in the Library>Audio>Plug Ins>Components folder and there were no t-racks.component files in there. You are correct that there is a stand-alone shell for T-RackS and I downloaded that after I tried installed the EQ component three times without any success. I then noticed that the EQ component was ver 1.3 and the T-RackS shell was version 3.0, so figured it might be that I was trying to install a version of the EQ that was too old. Once I installed the T-Racks 3.0 shell, the Classic EQ showed up in the T-RackS stand-alone shell, and it is also now showing up in Logic Pro. When I click on one of the Insert buttons in the channel strip, the T-RackS Classic EQ shows up under "Audio Units/IK Multimedia", which is where I originally expected it to show up.
Thanks again for your assistance.

Ipod shuffle 1GB Re: how to resurrect a dead shuffle? Nov 5, 2008 4:42 AM (in response to Ipod shuffle 1GB) there is no sound cant find in Itunes not in showing in drive's list please tell me how to restore or reset red light showing when try to power on

Ipod shuffle 1GB
Re: how to resurrect a dead shuffle?
Nov 5, 2008 4:42 AM (in response to Ipod shuffle 1GB)
there is no sound cant find in Itunes not in showing in drive's list please tell me how to restore or reset red light showing when try to power on or conect with USB....
If you can plz help to fiX it
thanx
intel pc , Windows 7, core 2 Dule Core

Here is the answer: go to http://support.apple.com In the search box at the top left type in the number 304996 and hit enter. This will bring you to a page with 4 solutions. Click on solution number 1 and follow the instructions. This should fix it.
bigdogdan

How do I stop the cloud TV shows from showing on my phone?

How do I remove the cloud TV shows from showing on my phone running ios7.0.2? I download tv shows from my computer, but there are so many cloud TV shows cluttering my screen that it's hard to find the ones I downloaded. Why can't we delete these from our phones like we can hide them in iTunes?

My Culprit: Skype
In case someone else stumbles across this thread: my "random" boing noise was caused by Skype: Preferences -> Notifications -> Event: Contact Becomes Available. Since that can happen anytime you're signed in, and there's no "obvious" message/event, it's hard to pin down.

How Can I Run a SQL Loader Job from Schedular

How Can I Run a SQL Loader Job from Schedular , So that It Runs every Day.

Depends on a couple of factors.
If you are on a UNIX platform, you can create a shell script and schedule it with cron.
If you are on a Windows platform, you can create a batch file and schedule it with the Windows scheduler.
Or, if you are on Oracle 9i or 10g, you could use the external table feature instead of SQL*Loader. Then you could write a stored procedure to process the external table and schedule it using the Oracle scheduler (DBMS_JOB). This would probably be my preference.

How to get a usb device to show up on macbook pro 13inch retina display late 2013 model. os mavericks

how to get a usb device to show up on macbook pro 13inch retina display late 2013 model? os mavericks

Check with your telephone carrier or Android:
https://www.android.com/filetransfer/
Ciao.

How do I safely eject a HDMI cable from my macbook pro?

How do I safely eject a HDMI cable from my macbook pro?
Also, every time i do so i lose the ability to use my volume buttons on the keyboard and have to restart my machine to fix.
I have a brand new Macbook Pro 15" Retina display.

What version of the system are you running on your MacBook Pro? Is it new enough to have the Messages application? If so, add your iMessages account to your Messages Application.

How to call Operating System commands / external programs from within APEX

Hi,
Can someone please suggest how to call Operating Systems commands / external programs from within APEX?
E.g. say I need to run a SQL script on a particular database. SQL script, database name, userid & password everything is available in a table in Oracle. I want to build a utility in APEX where by when I click a button APEX should run the following
c:\oracle\bin\sqlplusw.exe userud/password@database @script_name.sql
Any pointers will be greatly appreciated.
Thanks & Regards,

Hi Guys,
I have reviewed the option of using scheduler and javascript and they do satisfy my requirements PARTIALLY. Any calls to operating system commands through these features will be made on the server where APEX is installed.
However, here what I am looking at is to call operating systems programs on client machine. For example in my APEX application I have constructed the following strings of commands that needs to be run to execute a change request.
sqlplusw.exe user/password@database @script1.sql
sqlplusw.exe user/password@database @script2.sql
sqlplusw.exe user/password@database @script3.sql
sqlplusw.exe user/password@database @script4.sql
What I want is to have a button/link on the APEX screen along with these lines so that when I click that link/button this entire line of command gets executed in the same way it would get executed if I copy and paste this command in the command window of windows.
Believe me, if I am able to achieve what I intend to do, it is going to save a lot of our DBAs time and effort.
Any help will be greatly appreciated.
Thanks & Regards,

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
Also, you have no MIDI keyboard? Are the pedals both "standalone"?
I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
But much better would be to configure the pedal(s) correctly.

How to redirect console output while starting server from within IDE

Hello, i am using Weblogic Workshop IDE. When I start the server, a new cmd shell is launched and the jvm output is displayed in this cmd shell window. How can I redirect this output to show up within the IDE (for instance in the Console view)?
Problem is that when an error occurs, the cmd window disappears and I cannot tell what the error was.
Surely there is a way to do this as other IDEs (JBuilder, Rational etc.) allow this.
Thanks:
-Sam

Hi Sam,
Unfortunately, this feature does not exist in Workshop 9.2
Regarding your question about redirecting the output, the logs are saved under the domain directory.
You could also refer to the following section for additional info on redirecting the output to multiple destinations.
http://e-docs.bea.com/wls/docs90/ConsoleHelp/taskhelp/logging/RedirectJVMOutput.html
Hope this helps.
cheers
Raj

How do I know what files to remove from my Macbook Pro laptop?

Apparently my hard drive is full and I need to remove files so I have space to download more music and movies. I don't want to delete important files. How do I go about doing this?

How do I know what files to remove from my Macbook Pro laptop?
Remove only files you yourself stored on the laptop; files in your Home folder. Don't delete any files from the system libraries, and if you want to remove applications, use the provided uninstallers.
For files in the media libraries - iTunes, iPhoto, iMovie use the application to delete music, photos, movies.
If you are planning on storing more movies and music on your mac, deleting old files will probably not suffice alone to free enough space. Consider to get yourself an external drive to store your media.

How do I get sound on my TV from mo macbook pro?

How do I get sound on my TV from mo macbook pro?

Depends on what you want to do, do you want to play music or video?
If you have a Macbook that supports thunderbolt just connect it with a hdmi cable (if you want picture as well). If your mac doesn't support thunderbolt you could connect via the standard headphone jack. But still it depends on what you want to do. So...
What do you want to play... (music, video)?
What does your tv support (hdmi, digital audio (s/pidf?)?
This helps narrowing down your solution.

How do I get airplay to display content from my MacBook Pro?

How do I get airplay to display content from my MacBook Pro?

Turn on Airplay is display settings.
Select Airplay mirroring to Apple TV.
I Will assume you have already connected the Apple TV to your wifi and computer in the settings on the Apple TV.
that should do it.... Unless you need more information.

How To Open REX2 ReCycle Files In To The EXS24 Logic Pro 9 ?

Hi,How To Open REX2 ReCycle Files In To The EXS24 Logic Pro 9 ?

There is a variety of options.
See the Instruments manual, p302 "Converting ReCycle Files to EXS Instruments".

How do I uninstall debut video capture software from my macbook pro?

How do I uninstall Debut video capture software from my macbook pro?

Thanks Sig - not sure that the program came with an uninstall feature (seemed to just go straight into the apps folder but I'll give it a try.

How do I run a Midi Light show from within Logic Pro?

Similar Messages

Maybe you are looking for