How do I run a new Ipod on an older 500mhz 32 bit computer? New ipod requires v 10.6.3 or higher which also requires 64 bit or 1ghz speed.

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

Similar Messages

I download songs, vedios on ipod model no. MA978ZP through computer but ipod shows nothing it shows 0-songs, 0-vedios but when i plug with the computer it shows everything but when i unplug ipod nothing shows

i download songs, vedios on ipod model no. MA978ZP through computer but ipod shows nothing it shows 0-songs, 0-vedios but when i plug with the computer it shows everything but when i unplug ipod nothing shows

Have You used iTunes or did you just put files on ipod disc???
Try downloading new iTunes, and try with restore if nothing hapens!

TS2771 My iPod touch will only charge through computer, new wall charger will not charge it, but charges other iPods

My sons iPod touch will only charge with computer. This has happened since update. Wall charger charges other iPods/iPhone. Restored to original defaults. And still does not work.

I believe it started with the update prior to 5.1.1. I just udated it to the 5.1.1, thinking it would resolve the problem.

How to I run Snow Leopard, Mountain Lion and Windows 8 on my new iMac

I just bought a new iMac. My goal is to set up 3 different partions to run 3 different operating systems (Mountain Lion, Snow Leopard, and Windows 8). The reason for this post is because when I attempted to do this same thing on my old iMac ( except I was running Lion instead of Mountain Lion) I was able to create a partion that would run Snow Leopard (so I could run Final Cut Pro 6.0.6 on a more stable platform), however I totally "hosed" my old Bootcamp partition running Windows XP. The iMac won't even bootup in Bootcamp anymore. It is just a black screen and it says something about it not being a bootable drive and to insert a bootable disc.
So I need to know the best way to do this, and I want to avoid having the same problems with my new iMac that I had on my old one, especially since I have a freelance job starting next week and my client is sending me licences for software that I will need to run on Windows 8.
Thank you in advance

Use the Boot Camp Assistant to install Windows 8 and a product such as VirtualBox, VMware Fusion, or Parallels Desktop to run Snow Leopard Server in emulation. That iMac model isn't capable of being booted into Snow Leopard.
(82996)

How do I move my iTunes library from an older Mac to a newer one, and have it show up on my iPad and iPhone?

I have an iTunes library on an old G4 QuickSilver that I want to move to my MacBook Pro, and have some of the albums and songs sync-up with iCloud so I can access them on my iPhone and iPad. A lot of the albums and songs on the G4 machine were uploaded via CD, not purchased from iTunes.

You can move iTunes music files in the same way you would transfer any other file (thumb drive, external hard drive, etc.). Simply move them to your new computer and add them to your iTunes library (File --> "Add To Library").

I cannot install an update on Photoshop 11 because it says I have programs running that must be closed. I have no programsa of any kind running and I have shut down and restarted my computer twice and I still can't install the update. Also, the tutorial

I cannot install an update on Photoshop 11 because it says I have programs running that must be closed. I have no programs running and I have restarted my computer twice and am unable to install this update. Also, I need the update because the tutorial for 11 shows a completely different screen than I have on my version of 11. Please advise.

Garbage which operating system are you using? Have you tried using the Task Manager/Activity Monitor to close the offending application/process?

The Apple Store requires an apple Id and password. Apple also required the use of the Apple Store to upgrade Apple Applications. How to I get multiple Apple ID's etc. for the many Computers I manage/administer? I don't wish to use my personal ID or PW.

Acquiring multiple Apple ID's

For Mac Apps
Apple Software Volume Licensing
The fast, easy way to digitally download, install, and deploy Apple software to every Mac in your business or educational institution.
http://www.apple.com/mac/volume-licensing/
For iOS apps
App Store Volume Purchasing for Business
Unleash the power of the App Store to your entire workforce.
http://www.apple.com/business/vpp/

How can i run my form application on the other site?

how can i run my form application(already compiled) on the other computer without developer/2000 environment?
What should i do ?
Thanks in advance!

Well you have to install ORACLE developer runtime on your client side. then just copy your complied forms (fmx) files to your client machine and set it up to run.
Hope this helps
Faisal

HT201269 how can i restore a back-up from an older phone?

how can i restore a back-up from an older phone?
I did a back up from my iPhone 4 on iTunes but I don't seem to be able to restore on my new 5c

Restoring from an older iOS to a newer iOS version is fine. It's going the other way that would be a problem.
You do need a late version of iTunes on your computer to be able to work with the new iPhone. The current iTunes version is 11.1.3. If your iTunes is old, download the latest from
http://www.apple.com/itunes/download

HT204053 how do I access my Icloud email account from a Windows XP computer?

how do I access my Icloud email account from a Windows XP computer?

JonCarp wrote:
i get a server error message
Which browser do you use (and why iCloud when you are using a version of Windows that is not supported)

Older Airport Express and new MacBookAir pairing....

Here's the story:
I have a MacBookAir (very nice) which I use in a place without a wired / telephone line / broadband internet access. So, I use a Vodaphone wireless broadband connection using a USB dongle. Works well. That, of course, uses up the only available USB port on the MacBookAir, which means I am not able to easily plug in my small portable printer, which also requires USB, unless I disconnect the Vodaphone dongle, unplug it, plug in the computer, printer, then reestablish the Vodaphone connection....you see the hassle !
I have an older Airport Express (not sure if it is a, b, g ?) probably 3 years old. I had thought that I could use it to create a wireless network with my MacBookAir to use for printing.
The configuration I envisaged was as follows: Airport Express in to plug socket; USB connection from AE to printer. No physical connection between AE or printer to MacBookAir.
Using Airport Utility I try to discover the AE but scanning comes up with nothing. The AE in the meantime when first plugged in shows solid green, then a solid amber, then after about 15 seconds goes to flashing amber. Evidently, the AE, Airport Utility and my MacBookAir are not finding each other.
So: is it that the older AE and the new MacBookAir are not compatible. using different versions of the 802.11 ? Or have I got the set up completely wrong ? - ie. does the AE not speak wirelessly to the computer ? - does it need another base station to create the wireless network eg. Time Capsule or Airport Express Base Station ? I thought an AE would create its own little wireless network.
Thoughts, suggestions, help all appreciated ! Thanks.

I have an older Airport Express (not sure if it is a, b, g ?)...
The configuration I envisaged was as follows: Airport Express in to plug socket;...
What do you mean by "plug socket"? Is that the AC/power connection?
...then after about 15 seconds goes to flashing amber.
That indicates that everything is OK but the AirPort Express (AX) could not get an IP address. You would expect that if the AX is not connected to the Internet.
So: is it that the older AE and the new MacBookAir are not compatible. using different versions of the 802.11 ?
The MacBook Air is compatible with 802.11b/g so you should be able to see and use the AX.
Some countries allow operation in different channels. US made and sold equipment only uses channels 1 to 11. If your AX is using a channel above 11 and the MacBook Air is a US model, the MacBook Air will not be able to connect. Try configuring the AX to use a channel between 1 and 11.
Using Airport Utility I try to discover the AE but scanning comes up with nothing.
Have you done a reset on the AX?
Have you tried temporarily connecting your MacBook Air (or another computer) to the AX via Ethernet to configure the AX?

IPod Nano vs Windows 7 64 bit computer

I have an iPod Nano 6th Gen and a Windows 7 64 bit computer. With the latest iTunes 64 bit software updated on my computer, when I sync my Nano, it will no longer one finger swipe (like my iPhone), or rotate, I have to double click on any item there is a line around (box) the item I click, and it takes two fingers to swipe. I restored the Nano on a 32 bit computer and it works fine but my music is all on the 64 bit computer. Is this a compatibility issue? When I restore the Nano on my 64 bit computer it reverts to the "broken" mode. My iPhone and other iPods sync fine with the Windows 7 64 bit computer.
Thinking that it might be the software on my computer, I completely removed iTunes and all drivers and then reinstalled iTunes 64 bit. Still have a problem with the Nano. But, again, when I restore it with a 32 bit computer, it works fine.

Yes, a huge difference. At present Muse makes a very large number of small reads of the .muse file during open and throughout working on the file. Due to the latency overhead for each individual read from a server, this makes working with a file on a server painfully slow.
Planned changes to Muse should significantly improve this, but working directly on a file stored on a server will always be noticeably slower than working with the same file stored locally due the latency associated with each file access.

I have copied my CDs into iTunes (currently running v11) to play on my iPod. I have now bought a non Apple mp3 player to use when I am out running. How can I copy the many tracks I want from iTunes onto the new player?

I have copied my CDs into iTunes (currently running v11) to play on my iPod. I have now bought a non Apple mp3 player to use when I am out running. How can I copy the many tracks I want from iTunes onto the new player?
Thanks

I tried Notpod but can't get it to work. Part of the problem, I suspect, is that I can't create a folder on my player (a SanDisk Clip+). I also can't do this in Windows Explorer. Whilst I can see the Clip+ in Explorer, the option to create a new folder isn't there.
The error mesag I get in Notpod is:
"Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit the application will close immediately.
InvalidArgument=Value of '0' is not valid for 'SelctedIndex'. Parameter name: SelectedIndex"
Then, when I plug the Clip+ into a USB port, iTunes thinks it is my iPad - which is because, I guess, Notpod hasn't worked.
I can drag and drop files from the Music folder where my iTunes tracks are stored onto the Clip+ and they get converted but I'd rather synchronise a Playlist from iTunes if I can.
Thanks anyone who can help

My old computer has died, how can i get all my tunes on to my new computer and ipod?

My old computer died and i can't get access to itunes on it. how can i get itunes on my new computer without wiping my ipod and having to start again from scratch?

If the computer isn't functioning because of a operating system issue, but the computer itself still works, then it's possible to boot from a operating system on a cd or USB stick and transfer the files.
If the boot drive physically works (and it hasn't been encrypted), the files can be removed if the computer doesn't work as well. (more on that later as it costs more money)
For the first option your going to need to create a bootable USB or CD. I'm going to go with the easiest, a 2-4 GB USB thumb drive (nothing else on it of course)
Visit this page and download the Easy USB Installer for Windows.
http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/
Now from the first menu there you select Ubuntu 10.10 and check the box to download the ISO of Ubuntu Linux. Wait for it to finish.
Now #2 browse to the ISO you just downloaded.
Now #3 you select the EXACT drive letter of the USB (look under My Computer/Computer)
Leave "show all drives" and "persistence" alone. Check "format drive" (be sure the drive letter is correct!)
Click "Create"
Once you got that done, stick the USB in the back of the computer (if a tower) and hook up a external USB hard drive. (nothing else on it.)
Now you need to find the BIO's boot key for your problem computer, DELL it's F2 to enter the BIO's (list at link)
http://pcsupport.about.com/od/fixtheproblem/a/biosaccess_pc.htm
Navigate around in there and set the USB as the first boot option (or cd if you got a boot cd). Save the option.
Reboot the computer and it should boot off the USB. "Try Ubuntu/run from USB/CD" Don't install.
Once your in Ubuntu, you can easily go to the Places Menu and Select Computer, see all the drives and access your ENTIRE iTunes folder. Transfer this entire folder to the external USB drive.
Also you can grab your pictures and anyrthing else while your in there.
Now the second option is potentially destructive, if the computer doesn't work at all mechanically. Disconnect any power from the computer. Then you can remove the internal hard drive, use a powered IDE/SATA to USB adapter and plug it right into your new computer just like a external drive. However I would do a malware scan first.
Lastly if you got your iTunes Folder onto the new computer (replacing the new iTunes folder with the old). You need to open the XML file in a Text program that has "Find and Replace" ability. So you can correctly fix the partial pathnames from the old computer to the new computer.
This little step preserves all your playlists.
Once you got your content over, you should File > Backup Library to disk and feed it DVD-R's or use a external drive.
As you know, the iPod only sync's content one way, to the iPod. (exception for iTMS bought stuff on the iPod can be synced back into iTunes with the correct account enabled.) You might need to check iLounge for current third party software that reverses all content form a iPod back into iTunes.
Finally if this is all above your head, have a professional do it for you. Apple will not re-issue downloads, backing up is your responsibility.
Hope that helps.

I have music on my ipod that is no longer on my pc. How can I sync new music that is on my pc to my ipod without loosing the music that is currently on the ipod?

I have an iPod Generation 4. I have been using it with my pc Windows 8 iTunes for some time with no problem. Recently I had to do a system restore and reinstall itunes 7. It works great but I lost all of my music in itunes but I still have all of my music on my iPod. When I try to sync new music I have to my ipod itunes tells me it will erase all existing content on my ipod and replace it with the new content. My question is: How can I add my new music without loosing my old music?

See Recover your iTunes library from your iPod or iOS device.
tt2

How do I run a new Ipod on an older 500mhz 32 bit computer? New ipod requires v 10.6.3 or higher which also requires 64 bit or 1ghz speed.

Similar Messages

Maybe you are looking for