How do I run a new phone line from the ONT?

I want to move my phone plug to a different room. So I will have to run a new line from the ONT? I have a traditional 4 wire telephone cord, but the wires don't match up. Can use the test port? Or how else would I do this?

sean43245667 wrote:
I want to move my phone plug to a different room. So I will have to run a new line from the ONT? I have a traditional 4 wire telephone cord, but the wires don't match up. Can use the test port? Or how else would I do this?
It will cost you to add a line.  The test jack might work.  I was actually unhappy to see that when they replaced my BPON ONT with a GPON ONT that it went from have conventially modular jacks to having wire posts for the phone line.
Choices inlude. 
paying verizon to run wire
trying to wire to the ont yourself
putting a spliter/adapter somewhere on the existing wire to your new location
trying the test jack.

Similar Messages

  • How do I separate a new calendar app from the one that came with ipad, so entries only are made in new app?

    How do I separate the iPad's own generic calendar app from a calendar app I purchased, so that the entries I put into the new app don't cross over to the generic app?  Also, whenever changing over to a new calendar app, is it always possible to transfer all data from the old to the new or is there a limit on quantity or time frame ever?   Does it depend on the app?

    Cloning And Backup Tools
    A bootable clone is an exact copy of your drive which is capable of booting your computer. Making a copy of your computer which is capable of actually starting the computer requires special copying procedures. Some people just back up data files but if you have problems you have to reinstall all your operating system and all your applications. With a bootable clone you just start up from the backup drive and clone back everything.
    To copy files from one hard drive to another hard drive you can use:
    [CarbonCopy Cloner|http://www.bombich.com/software/ccc.html] (donationware)
    [SuperDuper|http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html] (shareware)
    [IBackup|http://www.grapefruit.ch/iBackup/index.html] (free)
    The Restore function of Disk Utility included in OS X. [Kappy's directions|http://discussions.apple.com/message.jspa?messageID=8799711#8799711]
    [Tri-Backup (commercial)|http://www.tri-edre.com/english/tribackup.html] (payware)
    [Silverkeeper|http://www.lacie.com/silverkeeper> (free) - version 2 has some issues (references: [1|http://www.macintouch.com/readerreports/backup/index.html#d12jan2009],
    [2|http://www.macintouch.com/readerreports/backup/index.html#d13jan2009]) and it is recommended Tiger users stick with 1.1.4.
    [Kappy's Backup Software Recommendations|http://discussions.apple.com/message.jspa?messageID=9065665#906 5665]
    [Overview of Mac OS X Backup Programs|http://8help.osu.edu/1247.html]

  • How do I run a 10g rep file from the command line, send output to previewer

    Hi Everyone,
    We are migrating from Reports 2.5 to 10g.
    We are creating a batch file to run one of our reports that is in the .rep file format. Can you tell us what we need to put in the batch file to run the report as a paper report and have the reports runtime prompt the user for the login and show the report in the previewer just like in Reports 2.5?
    Thanks.
    Emad

    They should take a look at the "Oracle Application Server - Reports Services - Publishing Reports to the Web" from Application Server Doumentation downloadable from Reports Homepage http://otn.oracle.com/products/reports
    Martin

  • How can I run two independant LabView applications from the same computer, without taking a performance hit?

    I have two identical, but independant test stations, both feeding data back to a Data Acquisition Computer running LabView 6.1. Everything is duplicated at the computer as well, with two E-series multifunction I/O cards (one for each test station) and two instances of the same LabView program for acquiring and analysing the data. The DAQ computer has a Celeron processor w/ 850Mhz clock and 512MB memory, and is running on Windows NT.
    I have noticed that when I run both the applications simultaneously, I take a substantial performance hit in terms of processing speed (as opposed to running just one program). Why does this happen and how can I prevent it? (In t
    his particular case, it may be possible to combine both the tests into one program since they are identical, but independant, simultaneous control of two different LabView programs is a concept I need to prove out).
    Thanks in advance for any tips, hints and spoon feedings (!)....

    Depending on your application, you may or may not be able to improve things.
    Firstly, each task requires CPU time, so a certain performance difference is guaranteed. Making sure you have a "wait until ms" in every while loop helps in all but the most CPU intensive programs.
    Secondly, if you are
    1) streaming data to disk
    2) Acquiring lots of data over the PCI bus
    3) Sending lots of data o ver the network
    you can have bottlenecks elsewhere than in your program (limited Disk, PCI or Network bandwidth).
    Avoid also displaying data which doesn`t need to be displayed. An array indicator which only shows one element still needs a lot of processing time if the array itself is large.... Best is to set the indicator invisible if this is the case.
    I think
    it would be best if you could give some more information about the amount of data being acquired, processed and sent. Then maybe it will be more obvious where you can optimise things. If you are running W2000, try activating the task manager while the program(s) are sunning to see where the bottleneck is.
    Shane
    Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)

  • How can i get a new iPod touch from the warranty it has if i lost it?

    i have lost my ipod touch 5g, but i do have warranty. i just dont know how to do it online.

    You posted in the iPad forum instead of the iPod forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
     Cheers, Tom

  • How do you create a new resource group from the new portal?

    There's no option for new resource group when you click the "+" button. Am I missing something?

    Hi mticb,
    As far as I know, we couldn't create an empty resource group in azure preview portal, please vote this similar feedback at:
    http://feedback.azure.com/forums/223579-azure-preview-portal/suggestions/6182477-create-resource-groups, sorry for any inconvenience.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How long does a new phone line take to fit? Patien...

    I ordered a new phone line in April and was given a date of 1st May 2013 for the engineer to call.
    Having booked a day off work for the 1st May I got a text the evening before to advise that extra work was required on the lines outside my home and that they would be in touch soon. On 17th May I got another text to advise that my order for telephone and broadband had been CANCELLED. I phoned and a new order was placed (with a half-hearted apologies for the incorrect cancellation).
    Text: 20th May. Apologies for the delay in booking an appointment.
    Text 21st May: BT here. Your phone service is ready for you. You can find a phone's number by calling 17070 from it.
    I did not not have a phione line.
    Text: 30th May. To advise a new number.
    Text: 30th May: Apologies for the delay in booking an appointment. Due to necessary additional engineering work. Next update will be 6th June.
    Text: 5th June: BT here. Just to confirm you've set up online billing with BT, If you didn't please let us know at ... I didn't set anything up as far as I know.
    6th June:  Apologies for the delay in providing your service. No updates. Escalated the lack of infpormation and hope to have more news tomorrow.
    7th June:  Apologies for the delay on your order. I can confirm that we are awaiting the outcome of our escalation with our suppliers and are confident of haveing (sp) and (sp) update for you on 11/6.
    Now, I am quite a patient person but I need a landline. I live 60 metres or so from a Post Office and even less from a main road. I can see a telephone pole from my back garden just 50 metres away. My neighbours have landlines. Why can't I have one?
    S

    Hi
    I am sorry to see you are having problems
    I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
    They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
    They are a UK based BT specialist team who have a good record at getting problems solved
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • How do i add a new phone to my itunes account and load my backup

    how do i add a new phone to my itunes account and load my backup

    The bottom section (iTunes part) gives instructions. The first few panels discuss backing up the old phone but then it gets into restoring to the new phone: http://support.apple.com/kb/HT2109

  • How do i get a new phone software for my nokia N97

    how do i get a new phone software for my nokia N97

    Check ovi suite for an update thats the only way
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • HT201269 yesterday i plugged my new Iphone in to my laptop and connected it up with Itunes. Itunes then deleted all my pictures off my new phone and reset my new phone with all the settings of my old phone! how do i get  my pictures back?????

    yesterday i plugged my new Iphone in to my laptop and connected it up with Itunes. Itunes then deleted all my pictures off my new phone and reset my new phone with all the settings of my old phone! how do i get  my pictures back????? Before you say Icloud they are not on there

    Sorry you can't.  Looks like your phone restore to an older backup.
    future reference import your pics to your PC, that way you can always sync it back using itunes
    http://support.apple.com/kb/HT4083

  • Recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step

    recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step instructions xoxoxo
    And my iTunes sign in is also screwed up... It is underneath my friends email (the one with my backed up data on his Mac laptop) HOW DO I CHANGE THIS SO THAT I CAN DOWNLOAD APP's again...

    I suspect unless he had some items in iCloud backup then they are gone.  Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.

  • How to change to a new phone. I currently have an iphone 5.  Just got a new iphone 6 as a gift. I want to switch over to my new phone on my own instead of going back to the store

    How to change to a new phone. I currently have an iphone 5.  Just got a new iphone 6 as a gift. I want to switch over to my new phone on my own instead of going back to the store

    Back up the old phone and restore the new one from that backup, follow these articles:
    Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support
    How to back up your devices using iCloud or iTunes - Apple Support

  • HT201269 how do i activate my new phone?

    how do i activate my new phone ?

    If you already have an old phone/ carrier just turn it on.  Verizon works in this way.
    With wifi follow the Setup Assistant on-screen.

  • Worst Customer Service Installing New Phone Line

    I am experiencing the worst customer service i've ever dealt with. First it took 3attempts to set up a home phone line. Verizon scheduled me between 8am-12pm the first time and came around 2:30, no one was there. Second time we scheduled between 12p-4p, they came around 8:30am. No one was there. Then they wanted to schedule again 5 days later. I wasn't having it, so they schedule next day (Sat) between 8am-12pm. Finally a technician came. He installed a new phone line. I needed this line for my son who was coming home on house arrest. All of this was explained to Verizon. The longer it took them to install the line, the longer he would be in jail. After the line was installed, my son came home on Friday, 7/3. Some time on Sat 7/4 The line stopped working, and 1am he was re-arrested because there was no phone service.Today is the 9th and still there is no service. I sat in my cvar this morning from 7:45am to 1:15 pm waiting for a technician who was supposed to be there between 8am-12pm. After numerous clls to Verizon, and numerous promises to call me back, no one ever called back, and the phone is still not on. I have never had a customer service experience as bad as this EVER! I am so glad I have my wireless with Sprint. I have Verizon FIOS at my home in Jersey, but this phone is in Philly. To top it off, one Verizon employee tells me today that The house arrest equipment doesn't work with fiber optics. Why wasn't I told this when I first ordered the service? I'm still waiting for a Verizon Supervisor to call. My last call, i was conviently disconnected while being transferred to a supervisor. Because of Verizon's no care attitude, now it will probably take another week before my son is released again.

    Hi chopsuper,
    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

  • Help- erased my iPhone through Find my iPhone (as it was stolen) but now I can't see how to restore to my new phone!

    My iPhone 4 was recently stolen, so I erased it via the Find my iPhone app.  I'm planning to get a new one and will want to restore it so it has all the data and setting from my old phone, but when I log into iTunes my old device isn't showing in the device list.  If it's not showing in the device list how can I restore the content to my new phone?

    Thanks for your very helpful reply.  It's just what I needed after the stress and upset of having my phone and indeed my entire handbag stolen.  I was under the impression that this was a forum to get help, but with people like you around apparently not!
    Please see below re some of your rude and in fact incorrect comments:
    diesel vdub wrote:
    Laurs234 wrote:
    when I log into iTunes my old device isn't showing in the device list. 
    Why would it?  Devices only appear in the list when they are connected to iTunes either physically via a cable or via Wi-Fi.
    Actually, that's wrong.  Maybe you should check your facts before you post rude and incorrect replies!
    Laurs234 wrote:
    If it's not showing in the device list how can I restore the content to my new phone?
    Read the User's Guide before asking any more silly questions.  Not trying to be rude but you come across as clueless.  The User's Guide covers basic functionality.
    I have read the guide, it doesn't answer my question.  Perhaps if you read the guide yourself you would be aware of that!

Maybe you are looking for