How do i run a new software program (Investment Account Manager for Windows) using Windows emulation software?

How can I run a new software program (Investment Account Manager for Windows) using Windows emulation software?

You will need a licensed copy of Windows 7, and I recommend VMFusion. You can run the program in Unity mode just as if it were a Mac application. Or, you can install Windows in Bootcamp and run the Mac in Windows when you boot and run it that way. Depends on the resources. I prefer the VM method because it is cleaner and gives you more options as far as backups, etc.

Similar Messages

  • How do I run a new Ipod on an older 500mhz 32 bit computer?  New ipod requires v 10.6.3 or higher which also requires 64 bit or 1ghz speed.

    How do I run a new Ipod on an older 500mhz 32 bit computer?  New ipod requires v 10.6.3 or higher which also requires 64 bit or 1ghz speed.

    http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
    ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
    ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
    Controller-specific error completion with error information indicating transmission error.
    On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
    Unknown/random errors, timeouts and all sorts of weirdities.
    As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
    Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
    I'd also add; make sure you have good backups when ATA errors are frequent

  • How can I get a new copy of the Voicemail app for my LG Spectrum?

    How can I get a new copy of the Voicemail app for my LG Spectrum?  It no longer works....the screen say Loading please wait....the
    !Visual Voice Mail - A Visual Voice Mail error has occurred.  Please try again. OK   I've tryed several times with the same message.  I've
    deleted the app from my screen and replaced it from the Apps Library....still the same message.
    I cannot find an answer on MyVerizon.  Any ideas?
    Thank you,
    Dee

    OK, at least 3 is working.
    I don't know how you have a Tape Recorder icon on your Home Screen. I cannot add one myself. But, I am running Holo Launcher in replacement of the default LG "Optimus" User Interface. It's much better in my opinion.
    Try long pressing the icon and select Edit and maybe you can change some attribute of the icon.
    Another thing you could do, is long-press an empty area of your desktop, to add an icon. Select Shortcut, then Select Contact, and scroll through your contact list and choose the contact that you added for *86.
    You realize if you have voice mail you haven't heard, there is a tape recorder icon in the notification bar, which you touch and pull down, then press it to dial voicemail.
    If that functionality doesn't work, you MIGHT want to consider doing a factory data reset on your device, but that is going to nuke all your personalizations and cause you work to set up again.

  • How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

    how to solve the problem when opening program illustrator cs6
    ERROR: 16
    It is WINDOWS 8.1 / 64 BIT
    help please

    Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
    02/14/14 07:20:26:474 | [INFO] |  | OOBE | DE |  |  |  | 8860 | DEVersion: 5.0.0.0
    02/14/14 07:20:26:475 | [INFO] |  | OOBE | DE |  |  |  | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
    [    8860] Fri Feb 14 07:20:26 2014  INFO
    ::START TIMER:: [Total Timer]
    CHECK: Single instance running
    CHECK : Credentials
    Load Deployment File
    CHECK : Another Native OS installer already running
    Create Required Folders
    Assuming uninstall mode
    Lookup for master payload
    [    8860] Fri Feb 14 07:20:26 2014 ERROR
    DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
    [    8860] Fri Feb 14 07:20:26 2014  INFO
    :: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s), 0 warning(s)
    ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
    Please search the above error/warning string(s) to find when the error occurred.
    These errors resulted in installer Exit Code mentioned below.
    Exit Code: 33 - The product is not installed, cannot uninstall.
    Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

  • How do i add a new ipod to my account?

    How do I add a new nano to my account?

    Just plug it in and set it up.
    (100209)

  • How should i connect my new macbook air to lcd projector for presentations?

    how should i connect my new macbook air to lcd projector for presentations?

    One of these should work, depending on the projector. Just note both will not allow you to play protected movies on the projector.
    VGA
    http://store.apple.com/us/product/MB572Z/A?mco=MTY3ODQ5OTY
    DVI
    http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

  • How do i create a new substatus in OSA (performance management)

    how do i create a new substatus in OSA (performance management)

    Hi,
    Please create substatus through transaction code OOHAP_BASIC. Select u201Csubstatusu201D folder from the left column.
    Hope this helps.
    Donnie

  • How do I save the width and height of a photo for repeated use?

    How do I save the width and height of a picture for repeated use, rather than having to enter it each time in the 'new file' box?
    Thanks,  Ed Jackson.

    It could be that I'm older and have forgotten. I'm now 73 and will admit I have forgotten many things over the years. I have been using Photoshop since Photoshop version 3.  And can not really recall which features or changes were made in ever version of Photoshop I have installed.  Adobe has added many features over the years. The number of bugs introduce has also greatly increased after CS3.  "New Doc Sizes.psp"  in your user id preferences is edited using the two buttons in the new document dialog.
    As for guide lines in new documents Photoshop CS6 or CC seem to add some for video file presets with guide lines.  I do not know how to edit or add guide line to new doc presets. Guide line actions are easy to create. I have also seem some guideline in new documents when I did not expect any perhaps a new bug. Photoshop like most software has bugs. If you do not see Adobe new presets perhaps you copied an old  "New Doc Sizes.psp"  over Adobe's newer default file or Adobe migrared you presets and wand wiped their presets out. There are bugs. Close Photoshop down and rename your current  "New Doc Sizes.psp"  in you user id Photoshop cc preferences folder and start Photoshop it will add a dedault  "New Doc Sizes.psp"  file see if you see Adobe new presets in the new doc pull down when you select video and film...

  • How many iPads can be on a single iTunes account if it is used in a school?

    How many iPads can be on a single iTunes account if it is used in a school?

    Hi kundan,
    You can create any number of variables for an infoobject but you can use only any one in a query.
    Your requirement can be achieved as below.
    Create a selection variable of type 'Multiple Single Values' on 0Calday.
    Drag 0CALDAY to the column in the query designer.  Drag you key figure below 0CALDAY.  It will be placed in a new structure.
    Hope this helps.
    Regards,
    Priya

  • I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

    I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

    Yes, it supports target display mode. Windows can be run with either Parallels or Boot Camp.

  • I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1

    I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1. Antworten auf Deutsch wären super!

    As far as I know there is no download resource for older Macromedia programs and it is highly unlikely that one as old as version 3 of Fireworks will be able to work on a Windows 8.1 system.  I was unable to get a Studio 8 version installation on a Vista system, and likely even an XP system (cannot remember that far back).

  • New oj5745 won't print from dell laptop using Windows 10

    New HP OJ5745 won't print from laptop using Windows 10.  Set up is wireless.  Norton firewall shutoff during set up.  Uninstalled all HP products and reinstalled new printer program.  Printer acknowledges connection to wireless network.  Printer shows up as default device on laptop.  When print command is sent, the printer indicates whirling circle but no results.  Bought printer yesterday.  Should I return it?

    Hi , Welcome to the HP Forums! I see that you cannot print with your HP Officejet 5745 on your Windows 10 PC, and I am happy to help!  To verify the printer's hardware is functioning, are you able to make copies from the scanner glass? Copying Documents or Photos with an HP ENVY 5640, 5660, 7640 e-All-in-One, HP Officejet 5740 and 8040 e-All-in-One Printer Series. Have you completed the hardware setup before trying to print from the computer? As shown in this guide, Set Up an HP ENVY 7640, Officejet 5740, or Officejet 8040 e-All-in-One Printer. If you are able to make copies, and completed the hardware setup, then try the steps within this guide, 'Offline' Printer Status Message Displays (Windows 10), and let me know what happens! Hope to hear from you soon!  “Please click the Thumbs up icon below to thank me for responding.”

  • HT204053 We both use the same iPad my father and I as of today, because I am using it too from now on, but each time the ID & Password pops up it ask for his, how can I access mine, so it's my account and financials being used. Thanks to any of those gift

    We both use the same iPad my father and I as of today, as is letting me use it too from now on (sweet! ), I do not want to make a mistake and accidently use my father's ID & passwords (dohh ), but each time the ID & Password pops up it ask for his (???), how can I access mine, so it's my account and financials being used. Thanks to any of those gifted with this knowlegde... AMAKANGAROO

    In order to reliably save the info and be able to restore at a later date, you would need to use his AppleID.
    Switch to it on iTunes, back the iPad up and confirm the backup exists (Preferences / Devices), then switch to yours, wipe the iPad and start afresh. Will also wipe his apps, as they are tied to the AppleID as well.

  • How can I uniquely identify computers on the same network/account specifically for airdrop use?  When I change name on one computer under contacts if changes on all computers.

    How can I uniquely identify computers on the same network/account specifically for airdrop use?  When I change name on one computer under contacts it changes on all computers.  I would like to change icon and name for each computer.

    you would need to setup a VPN and tunnel into your office.
    FYI..the default ports are 3283 and 5900.

  • How do I run a non-server program on Windows Server 2008

    I currently run a synchronization software application on my desktop in order to backup and synchronize over 600GB of data.  I would like to install this on our server, which runs Windows Server 2008, but the software does not provide for installation
    on this operating system.  I continue to receive a message stating that the software may not run properly on Windows Server OS, but it does not allow me to bypass this message.  Is there any way to create a partition or trick the software into thinking
    that it is running on a different operating system or do I have to abandon Server 2008 and install a basic home operating system in order to run this software?  Any help would be tremendously appreciated.  
    Thanks!
     

    Hi,
    According to your description, my understanding is that you want to install an software which is not supported by Windows Server.
    Try to install this software in other compatibility mode:
    1. Right-click the installation program and select properties.
    2. Select Compatibility tab, select the checkbox Run this program in compatibility mode for.
    3. try to use different OS to install this program.
    Besides, you may right-click the installation program and select Run as administrator.
    Above are my personal suggestion and just for your reference. If the problem still exit, I suggest you to connect the software‘s support/form for better help.
    If you want to backup date, I suggest you to use Windows Server Backup, you may reference the link below for detailed information:
    http://technet.microsoft.com/en-us/library/cc770757.aspx
    Best Regards,           
    Eve Wang     

Maybe you are looking for

  • Incorrect Idoc type ZSPA065 in the ALE definition of the source system RSAR

    Hi Experts, Incorrect Idoc type ZSPA065 in the ALE definition of the source system RSAR 373 error is coming . Some one suggested note no 886102  but i went inside i did not find correction or code for implementing please any body suggeste for rectify

  • Central Contract Release Orders

    Hi, I've done all the necessary steps for central contract management and my contracts are distributing successfully to ERP. This is contract is used in both SRM and ERP as a source of supply. But my issues is, when i create contract release order in

  • Syncing three machines in different locations.

    Sorry to post this in BOTH Leopard AND Time Machine, but I'm not sure what the required expertise would be, so apologies. I have an iMac at home using Airport 24/7 broadband. and a 400gb exterior hard drive (which I currently use with Time Machine) E

  • Application with many Front Panels

    Dear all, I am working on an application which has 3-4 front panels. Like, when the application starts, the "User Profile" panel is shown. From there i can move on to 2 different panels. 1 panel is for Taking data from the new user. another for takin

  • How are reviews organized?

    I always thought reviews in iTunes Store where organized by date with the most resent being first. However it appears to be random when reviewing TV shows on my iPhone running iOS 6. How are they organized then?