How do I run new iWork on OSX 10.6?Thanks

iWork is licensed for the system, not the user, so if this user is on the same system, there's nothing you need to deactivate. If this copy of iWork is installed on a different computer and you want to install on this second one, just delete the iWorks apps from the first system.
Regards.

Similar Messages

When i update apps on my iphone they need the ID that i used when i downloaded these app and i forgot this ID and a make a new ID how i used the new one to update these apps thanks

Hello all,
when i update apps on my iphone they need the ID that i used when i downloaded these apps and i forgot this ID and a make a new ID
How i used the new one to update these apps?
thanks

Your device can hold apps from multiple IDs, but to update them you have to swicth identities which is time consuming. If possible use only the one ID. If you need to reset the password for your old ID visit My Apple ID.
tt2

How to downgrade my new iMac to OSX 10.4

I have just received my new iMac 24" (intel, 3,06 Ghz) with 10.5.4 pre-installed.
Due to specific driver problems with an important printer I need to downgrade to 10.4.x but none of my "old" disks seems to work. They either do not recognise the hardware or just keep on rebooting.
Anybody an idea on how to do this?
Thanks,
Peter

Hello and Welcome to Apple Discussions.
The general rule is that you can't:
http://support.apple.com/kb/HT2186
I know that the first revision of Aluminium iMacs probably could be downgraded as the early ones were shipped with Tiger.
Could you post details of the driver issue to see if we can help with that?
<hr width="200">
BTW this forum is for the much older iMac (Flat Panel) models
G4 (aka Flat Panel): Intel:
Click image to go to correct forum.
cheers
mrtotes

How so I create new security questions

How do I create new security questions?

Hi Chrisjos,
Thanks for visiting Apple Support Communities.
If you need to change your security questions, the steps in this article can help:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
All the best,
Jeremy

How do u run office mac on the new imac

error message says cnnont open application microsoft word because power pc applications are no longer supported how do i run office mac on the new imac

Office 2004 probably was the best MS Office ever, works fine on PPC machines, badly enough on intel machines, unusable in Lion.
Office 2008 was a step back, runs badly on PPC machines, not very good for newer, Intel macs either.
Office 2011 seems the only rational solution for newer macs running SL and Lion.
There are free and good solutions, OpenOffice, LibreOffice and NeoOffice, all based on OO language. Apple’s iWork also offers a good solution, may be a little problematic if you currently exchange files with Windows users, mainly if you must keep the original format, including inserted data.
Summing up:
- if you frequently / currently exchange data with Windows users, MS Office is the best solution from reasons of comfort
- if not, any free office quoted above makes its job fairly well
- iWork is also good, and smoothly integrated with Mac OS X, of course
If you mainly need word processing, Mellel and / or Nisus are (very) good alternatives, may be tested for 30 days, then decide.
The offer is, as you may see, rich, richer than in Windows, but this also means, as the French say, l’embarras du choix, difficulty of choosing something!

How to tell Apple to stop harrasing users to update to the new iWork

I am reposting my reply in one of the discussions on iWork here as a new thread, hoping to get more direct help with my renewed concerns about iWork update.
We all have our own field of profession, our own workload and deadlines to meet.... I don't think it's ethical for Apple to dump that responsibility to users.
It's Apple's responsibility to make sure their updates don't leave out the features that users of the old version had invested their precious time / money in -- especially if Apple relentlessly pushes users to upgrade
It's been **** ever since my upgrade to new iWork. Long story short, I was back to iwork 9, after many trips to apple store, many hours reading and trying out various suggestions from forum discussion, and much headaches and loss of productivity....
After all that, you think Apple would leave you alone? No. Last week, I could not open my files that I need for my work beause an automatic update was running for me DESPITE the fact that a genious bar guy helped to make sure No AUTOMATIC UPDATE is selected in my system preference.
Now, I am back again with iWork 09, I want to keep it that way until Apple comes up with a sensible/responsible iWork update ...
But I am worried that the new version will be back on me, causing disruption again ... because I still see everyday Apple's notification urging me to update.
Please help me find out: How to tell Apple to stop harrasing users to update to their new iWork ?
How to hold Apple accountable ?
Your attention and suggestion is greatly appreciated.

Peter,
Thank you for your response. I know what you meant, and don't disagree with most of you said. Just wanted to avoid sending conflicting info to Razor06, I thought I'd make the following kind of counter points:
I am doing fine with my old Pages now, but not after frustrating weeks caught in between the 2 versions of Pages... In my experience, when both versions of Pages were running in my hard drive, the New version overtook the task every time... I could not get out of the trap until after I moved the New version to an external drive.
I used the word 'corrupted' facetiously to refer to the files that were opened by the New version
You were right: no need to re-save the old files that are not touched by the new version.... I said the same thing, but perhaps not as clearly ...
Apple does send me update notifications from time to time, because I only turned off the Auto Update. I did not turn off the Auto Check because I thought I still need it.
Totally see your points, no disagreement here:
         " Just get this straight:
                There are old files and software, and new files and software.
                The old can't open the new. "
Thanks again !
Sasha

I am trying to use the new iwork beta tools on iCloud. I currently have 10.8.4 OSX on my iMac and 6.0.5 version of Safari, but when I try to open documents on my iphone in the cloud it tells me my browser isn't supported

I am trying to use the new iwork beta tools on iCloud. I currently have 10.8.4 OSX on my iMac and 6.0.5 version of Safari, but when I try to open documents on my iphone in the cloud it tells me my browser isn't supported

Note that iWork for iCloud is only designed for PCs and Macs > http://support.apple.com/kb/HT5779
To access to your iWork documents on the iPhone, install Keynote, Numbers or Pages from the App Store

I am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going of

i am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going off. Can some one help?

Hi Jay,
Be aware that "Freeze Header Rows" and "Freeze Header Columns" apply only to rows and columns that are Header rows or Header columns. You can have up to five Header rows, Five Header Columns (and five Footer rows) on a Numbers Table.
"Header rows" is a special designation. Besides being able to be frozen, Header and Footer rows are not included in formulas referencing whole columns, making it possible to place formulas such as =SUM(B) at the top (or bottom) of column B without causing a self-reference error, These designated rows are also not included in sorts of the rows in a table.
Regards,
Barry

How do I get my old printer "HP Laserjet 4mv" to work on my newer Macs with OSX?

How do I get my old printer "HP Laserjet 4mv" to work on my newer Macs with OSX?
There is no HP support for this old printer. I have tried to connect via ethernet (thru ethernet router), and it does not show up in printer preferences. The printer worked fine on system 9x but when I went to my new macs with system X no luck. This is a great B&W printer that prints at 18 x 24". I would like to keep it and not junk it, but its been sitting on my desk unused for some time now. Any thoughts or JUNK IT! Thanks, R.T.

Does anyone at Apple have help for this sort of question - I too have an old printer (HP LaserJet 5MP) that I would like to keep using on my Mac. (Mac OSX 10.6.8).
I got it working by getting a USB cord that connects to it - but every once in a while it just stops working for weeks. The mac 'sees' it and it sends the data because the printer lights start blinking but then it just doesn't do anything. Is there no one who can tell me (and raterada) how to get some new life into these old printers. I would rather not add this (and a new toner cart) to the landfill just yet. . .

I am running osx version 10.6.8 with safari 5.0.5. recently i ran one of those recommended upgrades and now Safari continually quits citing .WinASOEasyTweakVKey.Gen.tmp plug-in. how in the world do i combat this issue? thank you!

I am running OS X, version 10.6.8 with safari 5.0.5. recently i ran one of those recommended upgrades and now Safari continually quits citing .WinASOEasyTweakVKey.Gen.tmp plug-in. how in the world do i combat this issue? thank you! I have reset Safari several times.
Another new problem is Firefox telling me, when the e-mail window is open, that the window must run in 32 bit. The window is then disabled and then i have to restart Firefox.
Thank You for any help/hope you can give me with these issues. deborah

You’ve been infected with the “Flashback” malware. See this Apple support document:
About Flashback malware
Back up all data, if you haven't already done so.
From the menu bar, select
 ▹ Software Update
to install the latest Java update, as well as any other available updates. That should clear the infection in most cases. You must update to the latest version of OS X 10.6 or 10.7 before you can install the Java update.
The removal tool runs automatically in the background and is then deleted. Don’t look for something to click. If the malware is removed, you’ll be notified.
After you’ve secured your system — not before — change every Internet password you have, starting with banking passwords, and check all financial accounts for unauthorized transactions.

How do i install boot camp on a brand new 3tb iMac osx 10.8.2

how do i install boot camp on a brand new 3tb iMac osx 10.8.2?

Note: At this time BootCamp doesn't support 3TB drives - this is due to a memory allocation issue with Windows. Check out this article on a/an (unreliable) work around. I say unreliable because some people are reporting success and others failure. At this time if you really need Windows it probably would be better to use virtualization software like Parallels, VMWare, or VirtualBox.

I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?

I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?

Have a look at the menu file/process multiple files. You can choose to add your signature (or the caption) to the image and export the new files.
If that solution is not flexible enough, consider using the very affordable (12$) Elements+ add-on which offers a 'meta stamp' script :
http://elementsplus.net/v5/en/meta-stamp.htm
Otherwise, have a look at other free and good solutions like Faststone Photoresizer, Xnview...

How to do a SAVE AS in Numbers in the new iworks version 2.1

I just upgraded to the new iworks 09 version 2.1. The Save AS option has disappeard. THis is confusing. How do I do a Save As and give the sheet a new name.

I already posted the info several times.
The menu item Save is now Save…
which means that it open always the good old dialog.
The truth is that it's not the Save As… feature which is gone.
It's the Save one.
Trigger the menu Save… do what was achieved thru Save As…
Yvan KOENIG (VALLAURIS, France) mardi 26 juillet 2011 11:05:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How do you run a slideshow with no music in new Photos app

In the new Photos app I can find no way of running a slideshow without music - either the standard themes or selecting my own music. How can I run a slideshow with no music at all? No setting, tab or option seems to be available to achieve this.

Hit top right arrow for slide show; click on Music, click button next to search; choose Theme songs, click on blue check mark to remove it, then hit PLAY SLIDESHOW.

I do not want the new iWork. How do I get it to stop trying to update?

I do not want the new iWork. How do I get it to stop trying to update?

Sorry, there's no known fix.
Leave feedback for Apple about this:
http://www.apple.com/feedback/pages.html

How do I run new iWork on OSX 10.6?Thanks

Similar Messages

Maybe you are looking for