How do I run Solaris 7 in 32bit mode

I have an Ultra 5 with Solaris 7 and some software that only runs on Solaris 7 in 32bit mode so it won't install.
How do I get my box to run in 32 bit mode rather than 64?

Hi,
To boot the 32-bit kernel explicitly, the kernel file name
should be specified. So, for example to boot the 32-bit kernel in respond to the ok prompt as following:
boot kernel/unix
To boot in 32-bit mode by default everytime you rebooot:
Edit your boot-file environment variable from the ok prompt.
(To get to this prompt, halt your system.)
setenv boot-file kernel/unix
See also the boot(1M) man page - there is a lot of information here concerning how to boot the 32-bit or 64-bit kernel.
Thanks
Manish

Similar Messages

How do I run aperture in refernce mode

How do I run Aperture in Referenced Mode, with the Library on my internal drive and the photos stored on an external.
I don't want to take up too much of my internal drive with pictures...
Thanks
Mariela

select photos at browser , then
file -> relocate masters
specfify external volume.

How to change from 64bit to 32bit mode?

How do i change my mac from a 64bit mode to a 32bit mode?.. Required for internet device to be downloaded..
Also will it affect my mac in any way?
Thanks

To boot in 32-bit mode hold down both the 3 and 2 keys while booting.
http://support.apple.com/kb/ht3773

How do you run in 64 bit mode?

Is it just the case of pointing JAVA_HOME to the 64-bit bin/ folder?
Or
Just add the -d64 parameter when calling java from the main bin/ folder

Sorry! I know how to install and what system. I have T1000 Sparc and I have Java properly installed.
First I ianstall the standard Solris JDK package and then I install the sparcv9 package.
running java -version straight from the console produces...
java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Server VM (build 11.0-b16, mixed mode)
running [path to jre]/sparcv9/java -version produces
java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b16, mixed mode)
What I was wondering...
When a 3rd party application or even my own need to call java need to set the JAVA_HOME variable in there scripts. Should I point their script to the main bin/ folder or should I point the scripts to the 64 bit bin/ folder?
Or should I just pass the -d64 argument and then voila 64bit running?
Edited by: Tasso_A on Jan 13, 2009 12:28 PM
Edited by: Tasso_A on Jan 13, 2009 12:33 PM

How do I run CRX in debug mode with CQ5 , CRX version is 1.0.1

I tried below commands But Attached Debug option under Debug menu option is still disabled.
Option 1 :
C:\author>java -debug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_sock
et,server=y,suspend=n,address=30303 -jar cq-author-4502.jar
Listening for transport dt_socket at address: 30303
Loading quickstart properties: default
Loading quickstart properties: instance
Low-memory action set to fork
Using 64bit VM settings, min.heap=1024MB, min permgen=256MB, default fork argume
nts=[-Xmx1024m, -XX:MaxPermSize=256m]
The JVM reports a heap size of 1781 MB, meets our expectation of 1024 MB +/- 20
**** WARNING: insufficent PermGen memory ***************************************
The JVM MBean:PS Perm Gen reports 82 MB but we recommend at least 256 MB +/- 20
Use your JVM's PermGen size option (like -XX:MaxPermSize=256M) to set that size.
Will fork a JVM to get enough memory.
Available memory below specified limits and low-memory action set to fork, will
fork to get enough memory
Preparing to fork JVM, OS name=Windows 7, isWindows=true
Forking JVM: [C:\Program Files\Java\jre6\bin\java.exe, -Xmx1024m, -XX:MaxPermSiz
e=256m, -jar, C:/author/cq-author-4502.jar, -nofork, -pt, CHILD]
Loading quickstart properties: default
Loading quickstart properties: instance
Low-memory action set to fork
Using 64bit VM settings, min.heap=1024MB, min permgen=256MB, default fork argume
nts=[-Xmx1024m, -XX:MaxPermSize=256m]
**** WARNING: insufficent heap memory ******************************************
The JVM reports 910 MB but we recommend at least 1024 MB +/- 20
Use your JVM's heap size option (like -Xmx1024M) to set that size.
Will fork a JVM to get enough memory.
The JVM MBean:PS Perm Gen reports a maximum size of 256 MB, meets our expectatio
n of 256 MB +/- 20
Available memory below specified limits and low-memory action set to fork, will
fork to get enough memory
Not forking JVM as -nofork option is set
Setting properties from filename 'C:/author/cq-author-4502.jar'
Property '-quickstart.server.port' set to '4502' from filename cq-author-4502.ja
r
Property '-r' set to 'author' from filename cq-author-4502.jar
Property '-r' is already set (author), ignoring new value (author) derived from
filename
System property 'sling.run.modes' set to 'author' by -r option
Verbose option not active, closing stdin and redirecting stdout and stderr
Redirecting stdout to C:\author\.\crx-quickstart\logs\stdout.log
Redirecting stderr to C:\author\.\crx-quickstart\logs\stderr.log
Press CTRL-C to shutdown the Quickstart server...
Shutdown
MAIN process: shutdown hook
MAIN process: Exception in shutdown hook: java.io.IOException: The pipe is being
closed
MAIN process: Wrote shutdown string to child process, waiting for it to exit (ma
x 5000 msec)
Child process did not exit? Destroying it now.
MAIN process: Child process exited.
MAIN process: exiting
Forked JVM process exited with exit code 1
Main JVM process exiting
OPtion 2:
C:\author>java -Xmx512m -Xdebug -Xrunjdwp:transport=dt_socket,server=y,address=3
0303,suspend=n -jar cq-author-4502.jar
Listening for transport dt_socket at address: 30303
Loading quickstart properties: default
Loading quickstart properties: instance
Low-memory action set to fork
Using 64bit VM settings, min.heap=1024MB, min permgen=256MB, default fork argume
nts=[-Xmx1024m, -XX:MaxPermSize=256m]
**** WARNING: insufficent heap memory ******************************************
The JVM reports 455 MB but we recommend at least 1024 MB +/- 20
Use your JVM's heap size option (like -Xmx1024M) to set that size.
Will fork a JVM to get enough memory.
**** WARNING: insufficent PermGen memory ***************************************
The JVM MBean:PS Perm Gen reports 82 MB but we recommend at least 256 MB +/- 20
Use your JVM's PermGen size option (like -XX:MaxPermSize=256M) to set that size.
Will fork a JVM to get enough memory.
Available memory below specified limits and low-memory action set to fork, will
fork to get enough memory
Preparing to fork JVM, OS name=Windows 7, isWindows=true
Forking JVM: [C:\Program Files\Java\jre6\bin\java.exe, -Xmx1024m, -XX:MaxPermSiz
e=256m, -jar, C:/author/cq-author-4502.jar, -nofork, -pt, CHILD]
Loading quickstart properties: default
Loading quickstart properties: instance
Low-memory action set to fork
Using 64bit VM settings, min.heap=1024MB, min permgen=256MB, default fork argume
nts=[-Xmx1024m, -XX:MaxPermSize=256m]
**** WARNING: insufficent heap memory ******************************************
The JVM reports 910 MB but we recommend at least 1024 MB +/- 20
Use your JVM's heap size option (like -Xmx1024M) to set that size.
Will fork a JVM to get enough memory.
The JVM MBean:PS Perm Gen reports a maximum size of 256 MB, meets our expectatio
n of 256 MB +/- 20
Available memory below specified limits and low-memory action set to fork, will
fork to get enough memory
Not forking JVM as -nofork option is set
Setting properties from filename 'C:/author/cq-author-4502.jar'
Property '-quickstart.server.port' set to '4502' from filename cq-author-4502.ja
r
Property '-r' set to 'author' from filename cq-author-4502.jar
Property '-r' is already set (author), ignoring new value (author) derived from
filename
System property 'sling.run.modes' set to 'author' by -r option
Verbose option not active, closing stdin and redirecting stdout and stderr
Redirecting stdout to C:\author\.\crx-quickstart\logs\stdout.log
Redirecting stderr to C:\author\.\crx-quickstart\logs\stderr.log
Press CTRL-C to shutdown the Quickstart server...

Hi Manoj,
You can do it directly from felix console. just go to http://<host>:<port>/system/console/slinglog there you will see all log files. under first table "Log Level" you will see all the log files and besides to that you will have configuration option, just go there and set log level for each of log files and save it.
Let me know if you need more information.
Thanks,
Pawan

How do I run firefox in safe mode?

some how I deleted my pull down menus and toolbars - the knowledge base says I can get them back but first I should start by running firefox n safe mode

Firefox 3.6+ versions have a feature to allow the user to hide the Menu bar.
Hit the '''Alt''' key to temporarily show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark. <br />
The F10 can also be used on most PC's to temporarily reveal the Menu bar.
https://support.mozilla.com/en-US/kb/Menu+bar+is+missing

Port 135 and 25913 and how to run Solaris Container Manager?

What are these ports 135 and 25913 and how to I run Solaris Container Manager .
thanks

Hi Zeealee,
zeealee wrote:
What are these ports 135 and 25913 and how to I run Solaris Container Manager .I haven't heard of those ports being used with SunMC before, sorry (but maybe my memory is just bad). The features of Solaris Container Manager (SCM) have now almost been entirely superseded by [Oracle Enterprise Manager Ops Center|http://www.oracle.com/us/products/enterprise-manager/opscenter/index.html] (forum here), but if you're still looking to try SCM, the manual can be found here, and if you said "yes" to SCM when you installed your SunMC Server, then you should see it in your SunMC web interface:
https://<sunmc_server>:6789 --> SunMC 4.0 --> Manage Solaris Container
If you'd like a demo of how you perform Container/LDOM operations in Ops Center, let me know and I'll set it up.
Regards,
[email protected]

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

How can I run a keynote presentation in full screen mode ?

How can I run a keynote presentation in full screen mode?

Keynote runs in full screen by default when you click the Play button in the toolbar. If you want the slides to fit the display area, check the box next to "Scale slides up to fit display" in Preferences...

How to run in 32 bit mode on a mac 10.6.7 so I can use Rapport Trusteer

The security software Rapport Trusteer for HSBC bank has just been updated to run on Firefox 4 but will only run in 32 bit mode, I am using Snow Leopard 10.6.7. How do I change Firefox 4 to run in 32 bit mode?

You're welcome

How do you get 10.6 Server to permanently reboot and startup in 32bit mode?

Hey all,
I need to get my newly installed snow leopard server on a Mac Pro Quad Core running v10.6.2 of Server to permanently boot into 32 bit mode instead of the default 64bit mode that it always boots in.
I need permanent 32bit mode in order to give me a solution to proper driver support for PCI Express eSata Cards with "Port Multiplier" support that do not currently have 64bit drivers for OS X 10.6 Server yet?
I have forcefully booted into 32Bit mode with the 3 and 2 keys held down upon startup, and my eSata cards all of sudden work, and properly support my external 5 bay raid array (Backup drive) which uses port multiplier technology. These same controller cards do not load the driver (because there is no compatible driver at the moment) in default 64 bit mode that OS X Server boots into.
So if I am in forced 32bit mode for the server because I held down the 3 and 2 keys all is fine, but the moment I restart the server, it all goes back to default 64bit mode and non operation of the eSata Cards
Can anyone please help me with a known solution for permanent 32bit mode that actually remembers to stay put in 32bit mode at all times??
Cheers
FattyBlue (Nick)

Hi Y0$h1,
Thank you so much.. that software link worked a treat! It now permanently boots into 32bit mode, and mounts all my eSATA based Drives that are connected.
Thanks again
Cheers
Nick (FattyBlue)

For BPC how to enable Wow6432 compatibility to run in 32 bit mode on the 64

Dear friends
I am going to install BPC 7.0 so I want to enable following issues on my windows OS 64Bit
"If you run this on 64 bit hardware, you must configure it to enable
Wow6432 compatibility to run in 32 bit mode on the 64 bit system"
can any tell me solution as soon as possible
regarads
krishna
Edited by: krishna murthy on Feb 24, 2010 11:24 AM

hi,
as you read, your BPC was designed for NET1.1 which build under 32bit platform while NW AS ABAP needs 64 bit environments to run. wow3264 is to enable your 32 bit application to run on 64 bit platform in this case BPC NET component can run on 64 bit. wow3264 is windows registry keys. so you can find it in the registry value using regedit.msc.
may this help you.

How do I run the SW in single phase mode?

How do I run the SW in single phase mode?

All you need to do is to modify the FPGA example a little bit, as the below illustrations.

Firefox crashes when any facebook mafiawars link is clicked, it only works if i run firefox in safe mode. Why? & How do i fix it?

after being auto-updated to version 15, firefox crashes when any facebook mafiawars link is clicked, tried versions 3.6.12 to 15 without any change and even updated java but it only works if i run firefox in safe mode. what happened and how to i fix this major problem? the only info i found was about pogo and said to update to version 15 but thats what caused the problem in the first place...

Hi,
Unfortunately we had a data base error today and lost some user accounts when we had to go back to our backups. If you have started this thread, your's is one of those. Since we can not recreate your account, please sign-up for a new account here to reply to the forum messages:
https://support.mozilla.org/users/auth
You can use the same username and email address as before. We are very sorry for the inconvenience.

How to run labview in debug mode

Two questions:
1. how to run labview in debug mode
2. how to save default text values in labview

Hi,
consider i have streaming bits of data as input who length varies each time. I need to select 11 bits at a time and apply (15,11) hamming coding for the inputs till the input is stopped.
I have designed the hamming encoding and decoding block. I need a methodology to select 11 bits at a time from the input and provide to the hamming encoder.
eg: if input is 1100 bits, output must be 1500 bits.
I have uploaded the encoder and the decoder part. Please suggest me the design to read the input and append the output.
Attachments:
project_HammingEncode.vi ‏19 KB
project_HammingDecode.vi ‏22 KB

How do I run Solaris 7 in 32bit mode

Similar Messages

Maybe you are looking for